Q:In the decoration, why use laser level instrument out of the horizontal line, hit on the wall, there will be a slight jitter? The farther away, the greater the jitter

Is mainly due to the level of internal, internal energy and good magnetic distance is too high, resulting in a level is difficult to stabilize, another factor is the construction, such as vibration, electric hammer, saw, hammer in the construction, will lead to, and level is not good with this kind of problem. Zhejiang Yuli company, Ben Simailong, Jiangsu Deli, laisai, Leica

Q:BOSCH low level instrument to see the comment, the line out too thick. Are there any other good brands to recommend?. There are so many brands on Taobao that they look dazzling.

I'm using Black & Decker, and I feel fine.

Q:When the laser level is opened horizontally, it does not move on one line when it moves around. How can it be corrected?

Move the instrument around? If so, it is because of the uneven terrain, the height adjustment can be.If it's spinning around, that's the instrument itself. Need to be calibrated or repaired.

Q:The role of the bottom magnet of the laser level

Adsorption onto the surface of an object for ease of use

Q:How many lines of laser level instrument do you need to stick the floor tile?

To paste fast, professional 12 wire wall tester

Q:Laser level sDB1, four threads are all broken, I do not know which welding!

There should be drawings. I have a circuit diagram.

Q:How can the laser level adjust the height of the horizontal line?

You can fix the level on the three stand and adjust the height of the horizontal line by adjusting the height of the three leg.Laser level meter operation mode:When measuring, the working surface of the level instrument is close to the tested surface, and the reading can be carried out until the bubble is completely stationary.The graduation of the level is based on the slope value of one meter as long as the actual tilt of the length of L is calculated by the following: the actual slope = the value of the division *L*, the number of deviationsIn order to avoid the measurement error caused by the zero position of the level instrument, the zero level of the level instrument must be checked or adjusted before use.Level zero calibration method: the horizontal instrument is placed on the base of the stable and approximately horizontal plate (or machine tool guide rail). When the bubble is stable, the end is read at the end, such as the left end, and zero. Then turn the level of 180 degrees, still placed in the original position of the plate, to be stable after the bubble, still in the original one (left) readings A, the level of zero error is two points A grid. If the zero error exceeds the permissible range, then adjust the level zero adjusting mechanism (adjustment screw or nut, the error is reduced to zero within the allowable value. The nut shall not be turned freely for the screws which are not specified.

Q:What are the common problems with infrared laser levels? How should I solve it?

Product features:1. Launch a horizontal line2. Emit four vertical lines and cross each other at the zenith3. Launching a site for plumb points4 、 automatic Anping and over range automatic alarm function5 、 equipped with magnetic damping compensation system6, with the receiver, the effective distance of 30 meters

Q:Laser level can see the horizontal line in the sunlight is that good

Can we see the beam in the outdoor sunlight?

Q:How do you attach tiles with a laser level?

Laser level is only used to measure the height of the skew.