wheel loader LW900K,High productivity and low fuel consumption
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Items | Unit | Parameters |
---|---|---|
Rated bucket capacity | m3 | 5 |
Rated load | kg | 9000 |
Operating weight | kg | 29500 |
Max. traction | kN | 245 |
Max. breakout force | kN | 260 |
Boom lifting time | s | 7 |
Total time of 3 devices | s | 12.5 |
Tyre | 29.5R25 | |
Overall dimension | mm | 9400×3500×3770 |
Engine model | Cummins QSM11-C335 |
---|---|
Type | Water cooling, 4 stroke |
Suction | Turbo charging, air intercooler |
Cylinder amount | 6 |
Cylinder bore | |
Piston displacement | 10.8L |
Speed controller | Electronic, whole process speed control |
Power | 250kW(335HP) |
Rated revs | 2100rpm |
Fuel system | Direct injection |
Max. torque | 1647nm@1400rmp |
Lubrication system | Gear pump forced lubrication |
Filter | Full flow type |
Air filter | (double element, dust discharge and dust indicator) dry type |
Hydraulic torque converter | |
Type | Single stage, 2 phase, 3 elements |
Transmission | |
Type | Planetary gear |
Travel speed km/h | |
Drive system | 4WD |
Front wheel | Fixed, full floating type |
Rear wheel | Central pin bearing, full floating type, 26° swing |
Reduction gear | Spiral bevel gear |
Differential gear | Common gear |
Final drive | Planetary gear, first stage reduction |
Service brake | Full hydraulic wet type disc brake (4 wheels) |
Parking brake | Wet type disc brake |
Emergency brake | Also used as parking brake |
Type | Articulation, full hydraulic power steering |
Steering angle | bidirectional 40° |
Min. turning radius(by outer wheel center) | 6200mm |
Steering system | |
Hydraulic pump | Gear pump |
Max. flow | 168ltr/min |
Pressure of safety valve | 19MPa |
Steering cylinder | |
Type | Double acting piston type |
Cylinder amount | 2 |
Cylinder bore × stroke | 115mm×445mm |
Loading control | |
Hydraulic pump | Gear pump |
Rated flow | 294+168I/min |
Pressure of safety valve | 20MPa |
Operating cylinder | |
Type | Double acting piston |
Cylinder amt. - cylinder bore × stroke: | |
Boom | 2-180mm×880mm |
Bucket | 1-220mm×590mm |
Control valve | Single handle |
Control device | |
Boom | Lifting, retaining, descending, floating |
Bucket | Back inclination, retaining, dumping |
Cylinder operating time | |
Lifting | 7 s |
Dump | 1.2 s |
Descending (empty bucket) | 4.3 s |
Cooling system | 65L |
Fuel tank | 420L |
Engine | 33L |
Hydraulic system | 340L |
Drive axle (each) | 66L |
Transmission | 64L |
The product structure and parameters will be subject to change with technical innovation. Please refer to the actual product if the information does not match.
High productivity and low fuel consumption
High performance Cummins QSM11(Tier3) engine.
Low fuel consumption.
ZF transmission with KD function.
Efficient hydraulic system.
Enlarged bucket capacity.
Long wheel base.
Comfortable work environment
Automatic electro-hydraulic transmission.
Low noise XCMG punched type cab.
Adjustable brake system.
Single lever clutch system.
Air conditioner.
Adjustable steering column.
High reliability
Originally imported Cummins engine, ZF drive axle.
Solid frame.
Maintenance-free, full hydraulic, wet and dry type parking brake.
Imported hydraulic and brake parts.
The wiring adopts water-proof joints.
Easy maintenance
The easily damaged parts are convenient to maintain.
Centralized pressure measuring
Centralized oil filling system (optional centralized lubrication system.
- Q:On April 2, 2009, Mitzu Mining Co. pays $4,853,110 for an ore deposit containing 1,569,000 tons. The company installs machinery in the mine costing $245,100, with an estimated seven-year life and no salvage value. The machinery will be abandoned when the ore is completely mined. Mitzu began mining on May 1, 2009, and mined and sold 184,500 tons of ore during the remaining eight months of 2009. Prepare the December 31, 2009, entries to record both the ore deposit depletion and the mining machinery depreciation. Mining machinery depreciation should be in proportion to the mine's depletion.
- I do not consider that's accurate
- Q:I heard or read an interview with Iggy Pop once, and in it he said he would go around to different factories and shops in the Detroit area to listen to the sounds the machinery and equipment made, and then use those sounds to influence his music.
- Nine Inch Nails helped popularize industrial rock by introducing conentional song structures to it(I like Reznor,just clarifying)-I wouldn't call them 'typical' examples of industrial music.Industrial rock can be traced back to early pioneers electro pop/experimental Kraftwerk to aaggressive noise like Throbbing Gristle and avant garde sounds like Cabaret Voltaire.
- Q:which industries use industrial robots, and which use industrial machinery?
- Tthe auto industry today use the robot in many sections including painting and welding. But most of industries use machinery.
- Q:as for cars, the battery is recharge when the engine is running, but when fully charged, it automatically shut off. Where are the excess electricity going?we used to have frequent power interruptions here in our locality. So, whenever there is electric power.We connect some car batteries to a power regulator/dynamo installed to an industrial machine that should operate constantly. But having the electric power back on normal operation, the owner didn't bother harnessing this energy bcuz they say it was inconvenient.Is that typical of humans?
- Astonishingly, the solutions you have available to you are generally the most efficient that are available at the time. We're naturally lazy creatures, so we do as little work as possible to get the solution we want... thus also being as efficient as we can be. Knock yourself out on this one, but you'll soon see how silly it is.
- Q:How is cantilever technology used in heavy machinery?
- anytime the load is extended out from beyond the structure, for example: 1 container cranes 2 shiploaders 3 ship unloaders 4 building a bridge over empty space (river, gully, road, railways) from both sides, especially evidenced in fixed stay bridges where the next segment is attached to the previous construction although the shooting bridge takes some of the loads 5 diving board at a pool
- Q:What would havehappened if the machinery were sold for less than itsbook value?
- You would have a loss.
- Q:For example, perhaps life is more efficiant? of something like that.
- The ability to self repair. If an animal gets a cut, its platelets eventually clot it and the cut scabs over and is eventually fully repaired. If a machine gets a hole in it, the machine cannot repair it itself.
- Q:have trouble doing anything as i injured my right hand an i'm right handed and live alone.
- If you were injured on the job the state workers compensation commision has rules and regulations that govern disability ratings and monetary amounts of compensation for each disability... many states (texas is the worst) laws are designed to protect the insurance companies and to screw the injured worker... you should definitely consult an attorney.
- Q:he is married to a cuban
- i think i saw him stealing a car down my road last night
- Q:In terms of marine or vessel machineries, I did not understand it clearly, please explain, I need your help.
- Auxiliary would be like a pump or power generator, ancilliary would be more like drill press in the mechanics shop, one is needed to service the other, or another example would be the automatic potato peeler in the mess would be ancilliary
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
wheel loader LW900K,High productivity and low fuel consumption
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords