Waterproof Changeable Color Programmable 5050 LED Module, Dc12V Lpd6803
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Advantages
1,Direct from factory DMX&matrix module LED light
2, RGB lpd6803 LED 5050 module
2,Epistar chip with 50.000 hours
3,CE/RoHS
4, from factory with 3-5days delivery
5, OEM/ODM accept
6, LED 5050 module light with DMX 512
ADS-IC324
1, ADS-IC324 is a combination of a aluminum (thermostability,cold-resistant,resistant to UV) shell and PCB board, also 4 spell line with blue,green,yellow,red color.contain 4PCS 5050 SMD LED
2, This product can achieve effects of full-color running water,chasing and scanning. Depending on the different installation methods may compose different dynamic effect of different color's character and design.
3, Easy installation, high brightness, safe and energy conservation, long lifespan,Low brightness declines.Widely used in LOGO, advertising billboard,exposed luminous characters, painted screen, can replace the traditional neon signs. The distance between the lights can be choosed as customer's request.
4, This product could be linked up to20pcc. more than 20pcs is strickly prohibited. The diameter of the power cord should be based on the actual maximum current, the product power, cabling length (recommended no more than 5 meters), and the voltage of transmission line.
Specification
Items | LED Qty | Color | Wavelength Scope(nm/K) | LED | PCB dimension | units |
ADS-IC324 | 4 | Red | 619-635K | 5050 RGB | 34*34*1.6 | 20pcs/chain |
Green | 512-528K | |||||
Blue | 463-475K |
ADS-IC324 Full color led single light Parameter
Items | Parameter | Units |
Vlotage | DC12 | V |
Power | 0.96 | W |
Temperature | -40-60 | °C |
IP grage | IP66 | |
demension | 35*35*5 | mm |
lifespan | 50000 | hours |
View angle | 120 | °C |
Technical Parameter of controller
Items | Parameter |
Input Voltage | AC110V/220V(configurate according to end-user) |
Battery Plug | GB, UK, U.S. regulations, etc.(configurate according to end-user) |
Power dissipation | 2w |
Control Protocol | ICC,DMX512/1990 |
Stand by IC | LPD6803,D705,D709,WS2801,DMX512/1990 Decoder/ Driver |
Control points | 1200 points 2048 points 512 address(channel) |
Gray scale | 32 level, 256 level |
SD card | Support FAT or FAT16 files system |
Working Temperature | –35°C—75°C |
Play speed | Default 20 frames / sec; DIP switch can switch between 1-40, 8-level speed adjustable |
Indicator light | power indicator light(Green,Power),Play speed light(Red,State) |
LED Module Applications
1,channel letter
2,Advertisements sign
3,KTV,Disco
4, LOGO, advertising billboard,exposed luminous characters,
5, LED display screen, painted screen
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By Sea | 30-40 business days |
1. 3-5 business days for Sample Orders; 7-15 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:What is the difference between SMT LED packaging with silicone and epoxy resin transparent package? What is the market situation of these two types of packaging?
- To package with epoxy SMD beads are used in a lot of outdoor display, because the epoxy adhesive with good adhesion to all better PPI support in outdoor use, our high quality and inexpensive epoxy epoxy call for samples
- Q:Patch LED light does not flash, why?
- Hit the meter on the buzzer and measure the patch individually. If the flash is a patch, the light goes off.
- Q:Patch LED light broken one, short circuit can use it?
- Patch LED lamp LED wick is usually series, and a bad, can temporarily short-circuit, temporary use, because after short-circuit, this LED wick voltage will be assessed to other LED wick, accelerate other LED wick aging.The damaged LED wick needs to be secured as soon as possible.
- Q:What is the difference between patch LED beads and LED beads: General
- A pin of the lamp, and outside a resin cap, because the reason LED beads can spotlight cap;There is no pin on the patch and there is no resin cap outside. Because of the lack of cap, the LED patch can not be concentrated.Patch is based on small power, the shape is relatively small (usually 0.5 and 0.5W products)It's called patch because some small ones need Mounter to machine.The ordinary LED lamp, solder joints than SMD beads, now is the largest artificial welding. Regular watts count from 1-300W
- Q:What is the difference in performance between the LED plug-in and the LED patch?
- 1, the patch is relatively easy to heat dissipation, can be directly welded on the aluminum substrate, heat faster.2, in general, there is a straw type shell, general lighting has front facing directivity, just look at it, brightness will be the biggest. The patch has a relatively wide divergence angle and is more suitable for fluorescent lamps.
- Q:What should I notice when I want to solder 1206 LED patch type luminous tube on fine copper wire?,
- I recommend reflow soldering under normal conditions and manual welding only when repaired. 2 manual soldering electric soldering iron maximum power can not exceed 30W, welding temperature is controlled within 300 degrees, welding time less than 3 seconds. 3 do not touch the colloidal iron welding head. 4 when the pin is heated to 85 degrees centigrade or higher than this temperature, it can not be pressed. Otherwise, the welding will be broken.
- Q:LED package and LED SMD LED lamp, what is the difference? Will the release agent be used in that part?
- Mold release agent is a functional substance between the mold and the finished product. The release agent is chemically resistant and is not soluble in contact with the chemical constituents of different resins (especially styrene and amines). Release agent also has heat and stress properties, not easy to decompose or wear; release agent bonded to the mold, and not transferred to the processed parts, without prejudice to painting or other two processing operations. Because of the rapid development of injection molding, extrusion, calendering, molding and laminating, the dosage of mould release agent is greatly improved.
- Q:What determines the brightness of the patch LED?
- The current through the lamp itself. If the same lamp, so it is necessary to ensure consistency in the different current circuit, the test voltage of little significance, especially in the case of parallel lamp, current a few beads each share is not the same, some big, some small.
- Q:Does anyone know what the current rating of a white high brightness LED patch is? Where can I find out?
- Generally small power LED rated current is basically 20mA
- Q:What are the storage requirements of SMT patch LED (LED)?
- Keep in storage- the original sealing bag packing in the condition of the <40 C and <90% RH degrees for 12 months, more than the storage period will bake.Please check the leak before opening the packing bagIn opening the sealed bag, should be placed in SMD LED and C 60%RH. < < 30 degrees under the conditions in the above conditions, SMD LED must be in the open package using reflow within 24 hours. If placed more than 24 hours, you need to bake- baked, SMD LED in C + 80 degrees 5 degrees C and <=10%RH relative humidity in the oven for 24 hours? remove the pouch before baking, and do not open the oven door frequently
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Waterproof Changeable Color Programmable 5050 LED Module, Dc12V Lpd6803
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords