Q:There is a stink in the electric kettle chassis. What's the matter?

Because of poor contact, the middle of the chassis is connected with the coupler and the metal sheet is heated, which causes the lining of the surrounding plastic to be baked (the coupler is up and down, and the base is replaced separately.). Replacement can be solved if it can be supplied with fittings.

Q:Why does the water heated by electric kettle float with white float?

The method of removing thermonatrite:A gauze bag, a small wad of cotton, silk or coarse flesh with a peeling seeded, wash, when boiling water into the kettle, water will be absorbed on the cotton ball or into a loofah, and the kettle bottom and the pot wall scaling is little; after a period of time after the cotton ball and loofahs in more alkaline, can take out water wash and rub or timely to replace a new. The simplest is the use of water purification facilities at home.Two, apple, hawthorn in the fouling in the kettle, the kettle cover and the kettle mouth tightly blocked, the stuffy about 10 days, the pot is easy to remove weak alkali; if the apple peel, hawthorn cut boil for one or two hour detergent effect faster. Put some potatoes in the pot and cook for a few hours, then the scales will crack and fall off.Three, in the pot into a magnet to boil water, also can make the scale split off.

Q:Why does the electric kettle have the highest water limit?

Injection of the liquid in the pot at least the heater should be higher than the highest surface a few millimeters, but can not exceed the highest level of the specified line; otherwise, easy to overflow water, use must be filled with water, after electricity, avoid to electricity, after installing water; do not use electric kettle to boil with acid, alkali and salt composition of things, in order to avoid corrosion of the kettle body and a heater; electric kettle when not in use, should be placed in a dry place, avoid moisture and reduce the safety performance of the electric kettle; it must be kept in the water heating process, and placed in the reach of children; the kettle from its socket before heating, to ensure that the power supply is disconnected.

Q:Can electric wires of rice cookers and electric kettles be mixed? The rice cooker is broken, so it can be used with an electric kettle

It should be OK to use the electric wire on the electric kettle, but the electric cooker can not be used on the electric kettle.

Q:How do you remove the water stains from the electric kettle?

Descaling of potato skinsPut potatoes in it, add some water, boil, boil for about 10 minutes, remove the scale of the electric kettle.

Q:5L electric kettle needs Duodawa socket?

Hello5L is the capacity of the canteen can not determine the number of sockets need to Duodawa, you look at the bottle body tag, logo is used if the power plug and socket 10 below 2000W, but in the socket cannot have too many other load, if the power is more than 2000W generally use plug and socket 16A!

Q:How can we prevent the electric kettle from drying and burning the thermostat?

When the electric kettle is not dry, the thermostat needs to be replaced in time, and a new dry burning thermostat is needed.Otherwise, in case of dry fire, the heating system of the electric kettle will be damaged. Then the whole kettle would be scrapped.Anti drying temperature controller is an important electronic component to prevent the heating element of electric kettle from being damaged.

Q:How to remove the tea dirt in the electric kettle?

Boiling water kettle for a long time, will bear a layer of white water in the kettle, it is not easy to clean. You can try in the evening before going to bed, with a strong vinegar brine with a pot, until the morning of the second day, and then the steel brush dip detergent scrub look, the scale is easily fall off.

Q:How about the electric kettle no longer calls?

You can unscrew the lid handle removed sound that a wafer spring, see if there is rust scale or, if you can manage it up and then put back, should pay attention to the order and remove the vocal pieces not backwards, otherwise open water will not ring if. How to deal with are not ring, it may be that the wafer three sound reed is broken, recommend replacing.

Q:Stainless steel electric kettle surface, why not add a layer of heat insulation plastic? Avoid water when touching the electric kettle. May I ask why?

Traditional electric kettles are made of metal shell, not plastic, such as the most ancient electric heating tube directly heated aluminum electric kettle. The heat conductivity of stainless steel is only 1/3 of iron. It is one or more of the ten or even twenty times of aluminum. Therefore, if the stainless steel shell can have a certain thickness, the water boils due to poor heat conductivity of stainless steel, not as much as 100 degrees celsius.