Single Screw Recycling Machine for Squeeze tube
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 10 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Single Screw Recycling Machine for Squeeze tube
Description of High Quality Extruder
Single Screw Recycling Machine for Pipe is mainly used to process PP, PE, PPR,ABS and other plastics. Equipped with auxiliary machines, it can manufacture profile, pipes, sheets and other plastic products and granulation. This Single Screw Extruder has the advantage of simple production technological process, high output, stable quality and low cost.
Advantages of High Quality Extruder
1.Suitable for various polyolefin materials: PVC, PC,and ABS etc. single screw extruder adopts advanced human-machine interface control system to realize the automatic control of the whole line
2.Excellent temperature control system to ensure the stability of the producing process. Integrated design of force water cooling and force feeding groove ensures the evenness and stability of the manufacturing process.
3.High-performance driving system; Wearable and easy to maintain.
Technical Parameters of Sigle Screw Extruder
Model | L/D | Output (kg/h) | Speed of Screw Rotation (r/min) | Power (kw) | Center Height (mm) |
JWS45 | 25/28 | 25/30/38 | 10-100 | 11/15/18.5 | 45 |
JWS65 | 25/28 | 50/60/80 | 10-100 | 18.5/22/30 | 65 |
JWS75 | 25/28 | 80 | 10-100 | 37 | 75 |
JWS80 | 28/30 | 100 | 10-90 | 37 | 80 |
JWS90 | 28/30 | 120 | 10-90 | 45 | 90 |
JWS120 | 28/30 | 250 | 10-90 | 75 | 120 |
Idea
The design concept of low temperature plasticization, ensure the high quality products of extrusion.
The two order integral design, strengthening plasticizing function, ensure the adjustment of high-performance extrusion.
The special barrier, comprehensive mixing design, to ensure the effect of mixing material.
The high torque output, large thrust bearing.
The gear, shaft for high strength alloy steel, carburizing, tooth grinding processing.
The high hardness, high smoothness, ultra low noise.
The PLC intelligent control, can realize the linkage between the main and auxiliary engine.
Excellent monitoring human-machine interface, easy to understand processing and machine status.
You can be replaced according to requirements of control mode (temperature control instrument).
The material for the 38CrMoAL/A nitriding, wear resistance.
The accuracy of temperature control strictly, wind cooling combined cooling.
The material inlet design unique, perfect with water cooling device.
Screw cylinder with bottom sleeve groove surface feeding, with enhanced feeding function, provide guarantee for high-speed high-yield extrusion.
- Q: What are the two types of extrusion?
- Extrusion? The extruder. The extruder is divided into single screw extruder and twin screw extruder, and the twin screw extruder is divided into two parts: flat, double and cone.
- Q: What raw material does the extruder use?
- Control science and EngineeringJob: in gender: Male College: College of mechanical and power engineering representative paper: melt rotating twin screw extruder in conveying flow solving teaching: research direction: mainly engaged in polymer material processingLinear low density polyethylene (LLDPE) linear low density polyethylene (LLDPE) linear low density polyethylene is structurally different from the generallow density polyethylene
- Q: Cable extruder how to match the mold, how to calculate the formula, ask the master pointing
- Look at what you have in the form of mold, extrusion, drawing, or half pipe
- Q: the machine vibration is great, the motor, reducer are checked, no problem, there is abnormal sound.
- Is the fitting of the moving parts normal?.Is there an impact on the extrusion chamber?.
- Q: PVC extrusion machine extrusion stone floor no pressure, what reason?
- PvC stone floor extruder pressure is adjusted by the screw and die head
- Q: Extruder price
- According to the size of the screw, single and double screw configuration is different, there are many different prices between fifty thousand to two hundred thousand, we specialize in the production of extruders, crushers and mixing machines, high quality and low price, contact information on the user name
- Q: Before and after the original good tune, up and down again before and after the tune, before and after, and up and down again
- The nose is not accurate enough or wornOr the screws are not screwed in placeOr die inappropriate, too large
- Q: What are the components of an extruder?
- The driving system of an extruder is to drive the screw, providing the torque and speed required by the screw in the extrusion process, usually consisting of an electric motor, a reducer, and a bearing.3. heating and cooling device for extruderHeating and cooling are necessary conditions for the process of making a plastic extruder. It includes two aspects:(1) now host extruder is usually divided into electric heating, resistance heating and induction heating, heating installed in the fuselage, neck, head of each part. The heating device heats the plastic in the outer barrel to increase the temperature required for the process operation.(2) the cooling device is designed to ensure that the plastic is in the temperature range required by the process. Specifically, to eliminate the excess heat generated by the shear friction of the screw rotation, in order to avoid the temperature is too high, so that plastic decomposition, coke burning or stereotypes difficult. Cylinder cooling water cooling and air cooling is divided into two kinds, small and medium sized extrusion machine adopts air cooling is more appropriate, large use more water or two kinds of combined cooling; cooling water cooling screw mainly adopts the center, the purpose is to increase the solids conveying rate, stable glue volume, and improve product quality; but in the cooling hopper one is, in order to strengthen transport of solid material, prevent warming plastic sticky jam outlet, two is to ensure the normal work of the transmission part.
- Q: Who knows the temperature regulation method of the extruder?Any information will do
- Extrusion molding in plastic processing is called extrusion, using hydraulic pressure in rubber extruder processing in extrusion die extrusion. That itself means that the material through the extruder barrel and screw the function between the side heating plasticization, screw edge is pushed forward, a processing method of continuous head made by various sections of finished or semi-finished products.In the fiber chemical industry is also useful in the extruder to the spinneret for melt spinning. The material, process of extrusion used in thermoplastic plastics and rubber, for batching, granulation, rubber filtration, continuous production, manufacturing various continuous products such as pipe, profile, sheet (or sheets), thin film wire and cable coating, rubber tire, tube noodles barrel, a sealing strip, the production efficiency is high. In the production of synthetic resin, can be used as reactor extruder, continuous polymerization and processing, in rubber industry, the compression ratio of different extruding machine can be used to unmasticated natural rubber of different materials. Compression extrusion machine than some different. [edit this paragraph] the principle of extrusion molding material since the bucket into the barrel, the screw rotates under the action of the cylinder wall and the surface of the screw friction shearing forward delivery to the feeding section in the loose. Forward transport also is compacted; the compression section, screw groove depth, further compaction, while the barrel heating and screw and cylinder wall friction shear, the material temperature rise began to melt, the compression section ends; homogeneous section material uniform, constant temperature, fixed quantity, squeeze out to melt. After a head forming, by setting the product.
- Q: Ask everyone about the extrusion machine at the wire factory...... How do you adjust the speed of the motor?
- Adjust the main speed buttonAskI've changed the line.
Send your message to us
Single Screw Recycling Machine for Squeeze tube
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 10 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
