Sand Milling Machine with best quality and good price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
10L/30L/50L Horizontal bead mill
Application:
Widely grinding application for pigment, inks, medicine, dye,sensitive film, pesticides, foods, electronic paste, papermaking, cosmetics and so on.
Characteristic:
The grinding chamber: high wear resistant alloy steel material,no pollution and no discolouring,(silicon carbide or Zirconia Zirconia or PU,PTFE is optional)
Dispersible disk: with eight groups arrangement ,the disk is made of high wear resistant alloy steel.
Separator device:it adopts the dynamic separating technology to separate the grinding material,the gap can be designed as the customer's demand,usually it is 0.35mm.
Sealing material: PTFE(Teflon)/ special rubber material with corrosion resistance and solvent resistance.
Mechanical seal:with a large end face and round steel finishing craftsmanship,the imported mandatory pressurization type mechanical seal increases the processing cost to completely guarantee the concentricity of power transmission and avoid any material leaking.The warranty of the mechanical seal is 3 years.
Driver:22/45KW three-phase Siemens brand motor and star- triangle start-up ensure the power start smoothly, the grinding rod pin will have a liner speed of 13 m/s which is controlled by the rotation rate of 960rpm,so it will achieve the highest grinding efficiency.
Feeding pump:Ingersoll brand 1"pneumatic diaphragm pump ensure the material transfer smoothly; diaphragm is made of Teflon which is corrosion resisting and easy to clean.
Electro connecting pressure gauge and electric contact thermometer:Brady brand ,good stability and long use life.
Electric device: switch panel is set together with device and it will be convinent for installing and maintaining.
Surface:spraying solvent resistant protective coating.
Technical parameter:
Model
(L)
Volume
(KW)
Motor Power
(mm)
Medium Size
(KG)
Weight
(mm)
Dimension
RT-10A
10
18.5
0.4-3.0
1000
1900*1000*1400
RT-30A
30
22
0.4-3.0
1100
2000*1100*1500
RT-50A
50
45
0.5-3.0
1800
2000*1100*1600
- Q:I swore into the Navy and i chose MR over a few other jobs, the other jobs sucked and they said this was the better one of them all. Do you know where MR's are usually stationed and if its a cool job? thanks
- It's ok. As an MR, your job is to become proficient in the operation of heavy machinery and damage control equipment. Specifically, you will become skilled in working a lathe and die set to manufacture small parts and things for the ship (and you will be stationed on ship-MR is a sea-intensive rate). You also will make a lot of name tags and Bakelite placards, since you own the engraving machine. With the caveat that my experience is all small boy (FF/DDGs), here are the pros/cons of the job. Pros-learn really technical skills that can come in handy throughout life. Work with your hands. People want to be friends with you so you can hook them up with placards. Usually one of only a few on a ship-you as one man (or woman) can make a lot of difference. Cons-Work as part of Repair Department/Division, normally a pretty screwy, unorganized mess of a unit. Lots of knowledge-have to learn the DC/HT job as well. Especially on small boys, have to contribute to Engineering Department manning/watch, lots of work there. It's not a bad rate, but it is a lot of work, like everything else in the Navy.
- Q:There are two cabinet saws I like ones a shop fox 3hp cabinet saw with 50 inch extension 230v so I would have to wire it the other a powermatic pm1000 that's a 1 3/4hp cabinet saw that's runs on 115v so I don't have to wire which also has a 50 inch extension the shop fox is 1800 dollars the powermatic pm1000 2100 dollars so which is the one I should buy 10 points best and most helpful answer I'm also only a hobbyist not a professional
- If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written. The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions.
- Q:What are the differences between loaders, gearboxes and other brands of loaders manufactured by Shandong construction machinery?
- Loader gearbox and other brand is the difference between SEM SEM is a fixed shaft type gear box is planetary have other brands
- Q:the metalic variety
- I would have to see it to tell you but stamping,casting or machining are the most common.
- Q:I wanna an experienced Wall roll forming machinery online shop?
- www.okorder ,this company has 13 years experience of roll forming used in construction industry.
- Q:What would havehappened if the machinery were sold for less than itsbook value?
- claim it as a loss and take it off your taxes
- Q:Do old-fashioned TV sets contain lenses in any part of their machinery?
- I dont believe so. I think that they have a really thick glass.
- Q:find the yearly depreciation of the machinery
- (40000-5000)/10= $3500
- Q:Mechanical keyboard, those better?
- Mechanical keyboard if you really want to get one or want to play if you don't see the sign that I do not look at the brand is the meaning of things with other types of electronic products is the same as the brand is good thing some models is very good but not that brand things are all the good stuff so it is about your requirements better and more detailed the better claim to shape what use feel
- Q:Examples being, Caterpillar bulldozers, skid steer loaders, front end loaders, steamrollers, etc.If so, what's the process of getting a license to do so?
- NO, you do not there are schools though that offer training as well as companies that provide on the job training. But there are not any licenses even for on the job trucks where you do not leave the job site.}{
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Sand Milling Machine with best quality and good price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
