Wooden box, or as per the customer’s requirements
CNC machining center, grinding machine, milling machine, drilling machine, horizontal milling machine, chamfering machine, CNC cutting machine etc.
Hardness tester, precision plug gague, gauge block, digital outside micrometer, outside micrometer, digital caliper, inside micrometer, inside dial indicator,
dial vernier caliper, dial indicator, depth vernier caliper and so on
T/T 50% deposit in advance ,50% T/T before shipment ;or others.
CNC center machining, CNC machinin, CNC drilling, CNC turning, grinding, tapping, mould design and processing, casting, sheet mental working etc
Automation machine, medical device, industrial machine, automobile,
electric appliance, and other industries, cnc machining parts, machining parts, hydraulic fittings
2.Process: Precision machining, cnc milling, cnc turning, cnc drilling
3.Material: Steel, aluminum, brass, stainless steel, etc
4.Surface:Polishing, powder coated, anodized, nickle plating, chromate etc
5.Tolerance: can reach to +/-0.01mm
6.Quality control: 100% inspected
7.Specification: OEM serice, strictly per drawing and samples
8. Sample delivery time: 7-10 days, per products.
9. Application: precision parts,mining accessories, machinery accessoried, cnc machining, truck parts, auto parts, industrial parts, machining parts, hydraulic fittings, hydraulic hose fittings etc
10. Customer: USA,Canada, Austrial, EU etc.
11. Certification: ISO 9001
1).Swaged Metric Fittings
Mertic Flat Seal Fittings Metric Multiseal Fittings
Metric 60°Cone Seal Fittings Metric 74°Cone Seal Fittings
Metric 24°Cone O-RING Seal L..T Fittings Metric 24°Cone O-RING Seal H.T.Fittings
Metric Standpipe Straight Fittings JIS Metric 60°Cone Seal Fitting
2). Swaged British Fittings
BSP O-RING Seal Fittings BSP Flat Seal Fittings
BSP Multiseal Fittings BSP 60°Cone Seal Fittings
BSPT Fittings JIS BSP 60°Cone Seal Fittings
3). Swaged American Fittings
SAE O-RING Seal Fittings
ORFS Flat Seal Fittings
NPSM 60°Cone Seal Fittings
JIC 74°Cone Seal Fittings
SAE Flange L.T. Fittiings
SAE Flange H.T.Fittings
4). Staplelok Fittings
Banjo Double connection
interlock Hose Fittings
FERRULE for SAE100R1AT/ EN 853 1SN HOSE
FERRULE for SAE100R1A EN 853 1ST HOSE
FERRULE for SAE100R2AT/DIN20022 2SN HOSE
FERRULE for SAE100R2A/EN 853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP,4SH/10-16,R12-06-16 HOSE
FERRULE for 4SH,R12/32 HOSE
Metric Thread O-RING Face Seal Adapters
Metric Thread Bite Type Tube Adapters
JIS Metric Thread 60°Cone Adapters
Metric Thread 74°Cone Flared Tube Adapters
BSP Thread 60°Cone Adapters
JIS BSP Thread 60°Cone Adapters
BSPT Thread Adapters
JIC 37°Cone Flared Tube Adapters
NPTF Thread Adapters
Note:Special dimension and other standard fitting are available under customers requirements. And OEM/ODM is welcomed.
Application:Automobile,Engineering Machinery,Lathe,Agriculture Machine,Mining,Spurting the Oil Paint, Metallurgy petroleum, Construction, Chemicals,Textile, Ships, Ocean Military, Recreation, Electronics and so forth.
- Q:Do the rubber joint and Y filter need flange connection?
- Rubber hose joints are usually externally threaded, and type Y filters are internally threaded and are directly connected to the same caliber.Flange connection also has ah, according to demand
- Q:Carbon dioxide gas shielded welding torch wire feed hose joint, that steel wire can not be drawn out, how to solve it, with welding?
- Some of the torch wire feeding hose can not be replaced, it is fixed dead, such as Xiong Gu, Lincoln's self shielded flux cored wire, welding torch.
- Q:How should we distinguish between the silicone hose and the rubber tube?
- Silicone hose is relatively soft, flexible, and looks better than other rubber tube gloss, color is mostly red, blue, translucent and other colors. Others, such as three yuan ethylene propylene and nitrile rubber hose, are basically black.
- Q:How to install the water hose and do you use the tape? Or direct installation?
- The pipeline key fixed: if it is not fixed, at the disengaged joint under the action of water pressure, or joint fixed point is the best, because only the most effective joint will be fixed, hard tube and building reliable fixed connection, can guarantee the normal use of the time to extend the hose.
- Q:The engine cylinder head cover behind the drop rubber tube what reason (Xichai 490 engine) (note the valve chamber cover tube)
- You don't know how to repair the craft, experienced by the feeling on the line, strictly speaking, is the valve clearance feeler to grasp, generally 125, 150 valve clearance at around 0.025-0.030, the exhaust valve to the inlet valve a little bigger than. Your car is too loud. Do you think the cam or valve is too big to wear? You have to go to an experienced garage to repair it.
- Q:M40 and M50, and then the hose is 2 "what does the box connection mean?"
- This should be called joints, hose connectors or joints or the traditional water tower.
- Q:Petroleum gas has a corrosive effect on ordinary rubber pipes and is easy to cause air leakage. So, what kind of hose must be used?
- These gases on the rubber has a certain corrosion, swelling (not resistant to oil will speed up swelling), aging effect, liquefied petroleum, so choose rubber seal to consider oil resistance, corrosion resistance, swelling.
- Q:How about rubber transfusion hose?
- The last step is to protect the sulfide layer to remove the wound hose and then taking care, and pipe fittings withhold, then you can test the pressure sampling
- Q:What is the principle of communicating devices? What if the rubber tube is used as a connecting device to change the water for the fish?
- The principle of communicating devices can be explained by liquid pressure. If the same liquid is contained in a U glass tube, a small liquid AB is conceived at the center of the bottom of the communicating device. If the liquid is stationary, it does not flow. The pressure of the liquid in the left tube toward the right side of the liquid AB must be equal to the pressure of the liquid in the right tube toward the left of the liquid AB. Because in the communicating vessel is filled with a liquid, the same two liquid column density, according to the formula of P= P GH liquid pressure that only when both sides is equal to the height of liquid column, the liquid column is equal to the pressure on both sides of the liquid film AB. Therefore, in the case of no flow of liquid, the liquid level in each vessel of the communicating device shall be kept flat. (ideal model method) the connecting device is characterized in that the liquid level in each container is flat only when the same liquid is contained in the container. If the container is tilted, the liquid in each container is about to begin to flow. One end of the liquid column flows to the lower end of the liquid column and stops flowing until the liquid level in each container is normal. As with rubber tube two glass tubes connected together in container with a liquid, which will be a fixed tube, the other tube up and down or tilt, can see the two tube level in stationary phase remained flat. The connecting device is provided with the same liquid, but the pressure on the liquid surface is unequal, and the pressure difference of the liquid surface is equal to the pressure difference produced by the liquid level difference of the two container of the communicating device.
- Q:Access toilet water inlet hose joints, how to repair water?
- You try to put the connector aside, hold some force in the toilet hole, or add a person to press it with your hand, then swivel the pipe joint and maybe open it.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range