Wooden box, or as per the customer’s requirements
CNC machining center, grinding machine, milling machine, drilling machine, horizontal milling machine, chamfering machine, CNC cutting machine etc.
Hardness tester, precision plug gague, gauge block, digital outside micrometer, outside micrometer, digital caliper, inside micrometer, inside dial indicator,
dial vernier caliper, dial indicator, depth vernier caliper and so on
T/T 50% deposit in advance ,50% T/T before shipment ;or others.
CNC center machining, CNC machinin, CNC drilling, CNC turning, grinding, tapping, mould design and processing, casting, sheet mental working etc
Automation machine, medical device, industrial machine, automobile,
electric appliance, and other industries, cnc machining parts, machining parts, hydraulic fittings
2.Process: Precision machining, cnc milling, cnc turning, cnc drilling
3.Material: Steel, aluminum, brass, stainless steel, etc
4.Surface:Polishing, powder coated, anodized, nickle plating, chromate etc
5.Tolerance: can reach to +/-0.01mm
6.Quality control: 100% inspected
7.Specification: OEM serice, strictly per drawing and samples
8. Sample delivery time: 7-10 days, per products.
9. Application: precision parts,mining accessories, machinery accessoried, cnc machining, truck parts, auto parts, industrial parts, machining parts, hydraulic fittings, hydraulic hose fittings etc
10. Customer: USA,Canada, Austrial, EU etc.
11. Certification: ISO 9001
1).Swaged Metric Fittings
Mertic Flat Seal Fittings Metric Multiseal Fittings
Metric 60°Cone Seal Fittings Metric 74°Cone Seal Fittings
Metric 24°Cone O-RING Seal L..T Fittings Metric 24°Cone O-RING Seal H.T.Fittings
Metric Standpipe Straight Fittings JIS Metric 60°Cone Seal Fitting
2). Swaged British Fittings
BSP O-RING Seal Fittings BSP Flat Seal Fittings
BSP Multiseal Fittings BSP 60°Cone Seal Fittings
BSPT Fittings JIS BSP 60°Cone Seal Fittings
3). Swaged American Fittings
SAE O-RING Seal Fittings
ORFS Flat Seal Fittings
NPSM 60°Cone Seal Fittings
JIC 74°Cone Seal Fittings
SAE Flange L.T. Fittiings
SAE Flange H.T.Fittings
4). Staplelok Fittings
Banjo Double connection
interlock Hose Fittings
FERRULE for SAE100R1AT/ EN 853 1SN HOSE
FERRULE for SAE100R1A EN 853 1ST HOSE
FERRULE for SAE100R2AT/DIN20022 2SN HOSE
FERRULE for SAE100R2A/EN 853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP,4SH/10-16,R12-06-16 HOSE
FERRULE for 4SH,R12/32 HOSE
Metric Thread O-RING Face Seal Adapters
Metric Thread Bite Type Tube Adapters
JIS Metric Thread 60°Cone Adapters
Metric Thread 74°Cone Flared Tube Adapters
BSP Thread 60°Cone Adapters
JIS BSP Thread 60°Cone Adapters
BSPT Thread Adapters
JIC 37°Cone Flared Tube Adapters
NPTF Thread Adapters
Note:Special dimension and other standard fitting are available under customers requirements. And OEM/ODM is welcomed.
Application:Automobile,Engineering Machinery,Lathe,Agriculture Machine,Mining,Spurting the Oil Paint, Metallurgy petroleum, Construction, Chemicals,Textile, Ships, Ocean Military, Recreation, Electronics and so forth.
- Q:How can I connect the gas tank connection hose?
- The general is directly inserted into the connector on the line, if loose, can use wire twist, still feel not reliable, can go to the market to buy two hoop, screw on the line.Keep it clean.
- Q:How to determine the tensile strength of GB rubber joint?
- The tensile strength test specimen is dumbbell shaped and can be divided into 1, 2, 3 and 4 types, of which type 1 is universal, and the specific dimensions of each part of the sample are as follows:For non-standard specimens, that is, the maximum thickness of the narrow part of the sample taken from the finished product is specified as: type 1 is 3.Omm, type 2 and type 3 are 2.5mm, and type 4 is 2.Omm.
- Q:How can the tightness of rubber tube and metal pipe joint be ensured?
- To see what kind of material hose, small 1MM~2MM, if the inner pressure then add hoop.
- Q:Method for inserting glass tube into rubber tube when assembling instrument
- Pipe connection is widely used in the laboratory. Besides the sleeve of the glass tube, there are plastic tube, rubber hose and iron pipe sleeve, etc. the sleeve connection method can be carried out by referring to the sleeve connection method of the glass tube.
- Q:Petroleum gas has a corrosive effect on ordinary rubber pipes and is easy to cause air leakage. So, what kind of hose must be used?
- In order to remind people of the leakage of liquefied petroleum gas in a timely manner, the processing plant often mixes a small amount of foul odor mercaptan or thioether compounds into liquefied petroleum gas, which is the source of special odor.
- Q:The small hose attached to the grease gun is coarse or fine at the joint
- For sealing, according to the maze principle, the smaller the pitch, the number of threads, that is, the more layers, the better the sealing effect, not easy to leak oil, significantly better than the rental thread.
- Q:Can the high-pressure rubber hose be followed by water pipes? Will it be poisonous?
- The problem should also not large, if it is stored for a period of time in the yard, first put best water again, after all, is not a food container rubber material, inside some substances will dissolve gradually, and there is a water purifier water generating reaction of some harmful substances.
- Q:How to make a rubber tube requires flow
- Rubber pipes are made of high pressure rubber hose and low pressure rubber hose.Low pressure rubber hose is made of inner rubber, cloth, winding (cloth, winding layer number), outer rubber. High temperature processing and vulcanization.
- Q:How do I get the hose for the gas cooker?
- In accordance with the relevant provisions of the country, the service life of plastic hose for two years, if used for a long time without replacement, easy gas leakage.
- Q:Difference between non-standard rubber joint and national standard rubber joint
- Rubber joint national Ministry of water conservancy is standard CJ/T208-2005 documents of rubber joint standard, this paper has clear rules for the product, identify the products should meet the following characteristics: standard rubber joint extrusion is produced by the rotation of the screw, the glue is advancing, and with the help of the mouth, but the needs of various semi-finished extrusion the shape of the. The extrusion process is characterized by uniform and compact quality and easy conversion of semi-finished product specifications and section shapes. The extrusion process of the national standard rubber joint in the extruder is divided into two parts: one is the extrusion system used for pushing the rubber; the two is the die system, which is used to form the rubber to make a definite section shape. Therefore, in the process of pressing, the rubber layer is usually more than ten layers, and the rubber joint has the characteristics of compact structure and high pressure resistance.Non-standard rubber joint is in the national standard between substandard products and national standard products, often illegal businesses use to reduce the rubber joint, the number of layers to reduce the cost of rubber joints. Use non-standard products instead of GB products. Non-standard products in use process, because the arc bearing layer, rubber layer is insufficient, the strength drops, in the use process is easy because the pressure withstanding insufficient causes the pipe network to burst.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range