PVC Wood Grain Decorative and Matter Surface Film 9700
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Importing modern equipment and skill to produce PVC pattern decoration material and PVC hardship.have a wide selection of design
1.Specifications
Pvc Film
1. Having own mould room
2. Guaranteed quality
3. Fast delivery
Specification: | Thickness:within 0.08mm to 0.60mm (according to customer's request) |
Width: within 670mm to 1450mm (according to customer's request) | |
Length: The MOQ is 2000 meters each color each size | |
Packing: | About 100m to 400m per roll (according to customer's request) |
Packing rolls with polyfoam in carton or pallet (according to customer's request) | |
Delivery time: | About 15-20 days after received the deposit |
Payment item: | 30% as deposit by T/T,the balance against B/L |
Shipping: | Any port in Foshan/Guangdong |
Others | Special requests on color matching and new designs creation are available. |
Features: | Exquisite color, distinct pattern, environmentally friendly, durable, waterproof, fireproof, unfading, anti-erosion, antirust, smooth surface, reasonable shrinkage ratio and no need to paint |
Main material: | PVC |
Applications: | Mainly used as decorative cover material for audio boxes, gift boxes, plywood, wooden doors, steel-panel doors, furniture and indoor decorations. |
Processing Mode: | Hot lamination,cold lamination,vacuum molding etc. |
Below sizes are our existing sizes, and custom sizes are accepted.
Size(MM) | Thickness(MM) | Packed | 20ft container |
1260 | 0.12 | 100m/400m | 90000m |
1260 | 0.16 | 100m/400m | 86000m |
1260 | 0.18 | 100m/350m | 85000m |
1260 | 0.20 | 100m/350m | 70000m |
1260 | 0.25 | 100m/250m | 70000m |
1260 | 0.30 | 100m/150m | 35000m |
1260 | 0.35 | 100m/150m | 35000m |
1260 | 0.40 | 100m/150m | 32000m |
1260 | 0.45 | 100m/150m | 30000m |
1260 | 0.50 | 100m/150m | 25000m |
1400 | 0.18 | 100m/300m | 50000-55000m |
1400 | 0.20 | 100m/300m | 45000-40000m |
1400 | 0.25 | 100m/250m | 40000-45000m |
1400 | 0.30 | 100m/150m | 30000m |
1400 | 0.35 | 100m/150m | 30000m |
1400 | 0.40 | 100m/150m | 25000-27000m |
1400 | 0.45 | 100m/150m | 25000m |
1400 | 0.50 | 100m/150m | 20000m |
- Q:What are the plastic plates that can be welded?
- [1] is the PPR material pipe and PVC-U water supply pipe, etc..[2] plastic board: plastic pipe is usually made of plastic resin as raw material, adding stabilizers, lubricants, etc., in order to "plastic" method in the pipe machine after extrusion processing.
- Q:Basement waterproofing wall protection layer approach, polystyrene foam board fire Mody?
- Others, such as wood, polyethylene foam, coil, etc. can also be used.There are polystyrene board with masonry wall protection approach, masonry wall and waterproof layer between the extruded polystyrene insulation board, to prevent condensation and protection of double role of waterproof layer.
- Q:I am working on case modding my wii and I want to cut a stenciled design out of the plastic on the side. Is there a certain tool that can do this eficiently? im not sure a dremel would work with such an intricuite design (sorry for spelling) so which tool should i use?
- Anthony, I would use a spray glue (sold in the glue section of most stores) and spray the adhesive to the stencil and then apply to the plastic. It's simple to do, just follow directions on the can. Then if you have access to a scrollsaw, you can use a fine blade and cut the design with little trouble, no matter how intricate the design. Of course if you're unable to lay the area onto the flat surface of the scrollsaw, this won't be an option. If you use a dremel, it will be very difficult to follow the lines, plus it will leave a melted area along the cut lines. you could try using a plastic cutting knife, but if the detail is intricate, you won't have very good control. If the plastic is thick, it probably won't cut through the material. You may be able to use a coping saw, if the throat on the saw will clear the side of the plastic so you can cut it. You'd have to drill a starting point for the blade to enter. If the throat is not wide enough on the saw, try removing the blade from the saw and use it without the saw. The blade is very fine and should cut the material, including the intricate areas. That's about they only reliable ideas I can muster. Perhaps someone else has some ideas. good luck
- Q:Can plastic sheets be used for sneeze guards in restaurants?
- Yes, plastic sheets can be used for sneeze guards in restaurants.
- Q:Long time use of plastic boards will cause harm to the body
- Although the plastic chopping board has light weight, easy to carry, but easy to deformation. Some textured plastic boards, it is easy to cut out residue, enter the body with food, will cause damage to the liver and kidney;
- Q:Acrylic plate and plastic plate how to distinguish?
- Acrylic is also called PMMA, plastic sheet belongs to engineering plastics; PVC is polyvinyl chloride, and it is a general plastic. Acrylic is the best new material that can be used to produce sanitary ware after ceramic. As a special plexiglass, acrylic can also be used in aircraft windshield, and used in harsh environments for decades.
- Q:Can plastic sheets be used for DIY room dividers?
- Yes, plastic sheets can be used for DIY room dividers. They are lightweight, easy to cut, and can provide privacy while allowing some light to pass through. Plastic sheets also come in various colors and designs, making them versatile for different room aesthetics.
- Q:Are plastic sheets resistant to fading from sunlight?
- Yes, plastic sheets are generally resistant to fading from sunlight.
- Q:Are plastic sheets durable?
- Yes, plastic sheets are generally durable as they are designed to withstand various weather conditions, resist impact, and have a long lifespan.
- Q:Do plastic sheets have any impact on insulation efficiency?
- Yes, plastic sheets can have a positive impact on insulation efficiency. When properly installed, plastic sheets can act as a vapor barrier, preventing moisture from seeping into insulation materials and reducing their effectiveness. Additionally, plastic sheets can help to seal air leaks, improving the overall insulation performance of a structure.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Wood Grain Decorative and Matter Surface Film 9700
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords