PVC Pressure Pipe GB/T10002.1-2006 on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
2.Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:Rubber soft joint, what brand of good, the best price is more reasonable. Don't say anything expensive.
- There are many kinds of rubber joint products produced in the West Village of Gongyi. The prices are high and low,Gongyi Kin Kun water supply equipment factory produces rubber soft joints all year round
- Q:Is rubber tube harmful to drinking water?
- If it is a constant water, okayIf you are in the tube for a period of time, it is best to put on the water, then, after all, rubber is not a food container, some of the inside material will gradually dissolved
- Q:Method for inserting glass tube into rubber tube when assembling instrument
- The sleeve method of different outer diameter glass tube should be determined according to the size of the outer diameter. If the outer diameter of the two tubes is not big, then the rubber tube with the same inner diameter can be connected. When connecting to the rubber sleeve in the larger outer diameter glass tube, the specific method, with a diameter from one end of the rubber tube of the same stick (such as chopsticks) inserted into the connection end to the rubber tube, rubber tube set in reverse, then the larger outer diameter glass tube against the wooden stick. The rubber hose forward turning sleeve on a glass tube, stick out.
- Q:Which is better for binding files with rubber tubes and cotton threads?
- In fact, the most suitable binding file is the file department I twine, such units are preserved, just to have you asked, hope to adopt
- Q:What material is used in the gas pipeline to reduce the wastage?
- Galvanized pipe is a pipe in galvanized steel pipe surface, a hot galvanized and galvanized pipe, galvanized pipe while the production cost is low, but easy to corrosion, therefore, is usually used for conveying gas hot galvanized pipe. The galvanized pipe not only has higher corrosion resistance, but also has a long service life, but because of its excessive interface, construction trouble is gradually being eliminated by the market.
- Q:Faucet hose connection problem
- The buried water pipe is outside the wire, you can use the inner home angle valve. When installing, pay attention to the rubber ring in the metal hose. The gasket should be put away. It is better to buy the transparent rubber ring and the metal hose of that kind of gasket, and pay attention to the length.
- Q:Can the natural gas hose not exceed 1.5 meters or 2 meters?
- The gas hose on the principle of not more than 1.2 meters, and regularly check the technical requirements, 1-2 must be replaced if the temporary gas can also be longer, if long-term use, as far as possible the use of metal pipe joint and the gas stove can also use metal hose, high safety factor.
- Q:How often do the oil - resistant rubber pipes undergo atmospheric pressure testing?
- Low temperature bending test at low temperature: hose clamp on rigid torsion wheel diameter hose diameter 12 times, for 6 hours at a low temperature, twisted 180 degrees within 12s when the measured torque and the standard temperature measured torque ratio. Low temperature bending: hose clamped in the diameter of the hose within 12 times the torsion wheel, parked at low temperatures for 24 hours, in the 10s to reverse 180 degrees, check whether or not the internal and external plastic brittle fracture and damage. Test of low temperature brittleness measurement hose is the most simple specimen should be bent 90 degrees at low temperature, or a hose after freezing compressed 1/2 to see whether the embrittlement, another method is to use a certain weight of the heavy hammer falls freely, to see if the specimen embrittlement impact specimen.
- Q:How can the soft joint of the pipe be elongated during use?
- Because the pipeline joint is a kind of soft rubber products, in the use of high temperature and high pressure rubber is easy to deform or due to internal pressure is easy to crack and surface as the main parts of long distance pipeline, influenced by the use of the process will produce corrosion phenomenon,
- Q:What is the function of the rubber pipe joint and the installation pipe?
- The inner seamless seamless rubber joint prevents the corrosive medium from eroding the inner wall of the rubber joint and improves the service life in the high temperature resistant, acid resistant and oil resistant pipes.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pressure Pipe GB/T10002.1-2006 on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
