PVC Pressure Pipe 20-200mm Diameter on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
2.Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: How far is the gas cooker from the gas riser in the kitchen?
- Rubber pipes shall not be worn through the chamber and should be checked regularly. It is found that aging and damage should be replaced in a timely manner (rubber tubes shall be used for a period of not more than 18 months).
- Q: How can the rubber joint be classified according to the range of temperature?
- Temperature resistance, suitable for operating temperature above 80 degrees in the transmission pipeline. Special rubber flexible joint is suitable for special pipeline system in the environment of oil, ozone, strong acid and alkali.
- Q: Is the electric water heater well connected with the metal hose?
- On the other hand, the utility model can effectively avoid the frequent switch of the water heater power switch because of the two grounding. Therefore, the metal pipe connection does not meet the safety and installation specifications.
- Q: What happened to the soft rubber flat?
- The two above are all correct, this is mainly to see where you are used, and if used in the settlement of the joint or expansion of the above, and then appear flat, then it is easy to burst the tube. It is important to note that metal bonding is recommended. Rubber joint is commonly used to shock, is not recommended when the expansion joints, expansion joints when used, if appear flat phenomenon, prone to pull off the situation (is flange off). The danger of exploding pipes everywhere. So it's not that rubber joints are bad, and it depends on where they are used.
- Q: What are the categories of hose?
- According to the compression status: pressure hose; suction hose; pressure suction hose (drain suction hose)
- Q: How can the soft joint of the pipe be elongated during use?
- Do not pay attention to the daily maintenance of pipeline flexible joint, because pipeline flexible joint is composed of a natural rubber and other synthetic rubber formula made in accordance with the proportion, because from the ultraviolet irradiation, the sun is long time exposure, the surface deformation or cracks, and maintenance method has two kinds, one is a surface covering a layer of sunscreen, no requirements of the network, as long as they can block the direct sunlight, the second method is talcum powder on the surface of the rubber joint, but also need to be covered with direct sunlight to place.
- Q: Why should the water stop strip be joined by heat instead of superposition?
- Lap joint of rubber water stop belt is lap joint, this method is not allowed in engineering, glue glue and do not use overlay. In the case of splicing, it is equivalent to not doing any treatment at the joint. In the process of pouring, the sealing strip is prone to roll and twist.
- Q: What are the standard numbers for hose couplings? What standards are they used to accomplish?
- Hose: a tubular rubber product for the delivery of gases, liquids, slurries, or granular materials. It is composed of inner and outer rubber layer and skeleton layer. The material of skeleton layer can be made of cotton fiber, various synthetic fiber, carbon fiber or asbestos, steel wire and so on.
- Q: Are the bridges, bellows and rubber tubes drawn out or are they drawn only? And the bellows are tensioned with the steel strand?
- The bellows are buried inside the component and do not need to be pulled out. Through reinforcement, only pre-stressed, without tension bellows. When tensioning anchor is completed, grouting work is necessary.
- Q: Flex rubber joint installation skills, what are the materials of rubber soft joint?
- Flexible rubber joint is normal for medium temperature of 0-60 DEG C usually water medium such as oil, acid, high temperature and other corrosive and texture should be selected under the peace situation should be relatively Tenai data can not be blindly on rubber joint or universal.
Send your message to us
PVC Pressure Pipe 20-200mm Diameter on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
