Plywood 1/2 with Poplar Material for Concrete Casting and Recycling
- Loading Port:
- Shekou
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m³
- Supply Capability:
- 6000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Plywood Introduction :
Plywood is with film faced , it is widely used in construction formwork system , it is the direct close with concrete .To make sure flat concrete surface, we ask the plywood better surface and long using lifetime .It can be with brown film and black film and plastic film.
Feature:
1.High bending strength
2.Strong nail holding
3.Moisture-proof and easy work
4.Tight construction and high strength
Specification:
Film | Chinese film 180-240g/m2 | |
Core | birch,poplar, hardwood ,combined or others | |
Grade | A/A or requested by customers | |
Glue | WBP,MR,Melamine(waterproof) | |
Size(mm) | 2440X1220, 2500X1250, 3000x1500 | |
Thickness(mm) | 6-27mm | 1/4inch(6-6.5mm) |
1/2inch(12-12.7mm) | ||
5/8inch(15-16mm) | ||
3/4inch(18-19mm) | ||
Moisture | ≤10% | |
Thickness tolerance | ≤ 6mm | +/-0.2mm to 0.3mm |
6-27mm | +/- 0.5mm | |
Packing | For transportation of Ocean and Land, Inside Pallet is wrapped with 0.2mm plastic bag, Steel strip or PVC for strength, More than 2mm plywood sheet or hard paper covering all the sides left, right,top and bottom. | |
Quantity | 20GP | 8 pallets/21M3 |
40GP | 16 pallets/42M3 | |
40HC | 18 pallets/53M3 | |
Usage | Usage Adequate for concrete forming for construction | |
Min Order | 1x20'ft container | |
Payment | T/T or L/C at sight | |
Delivery time | Within 20days after receiving deposit or Original L/C at sight |
- Q: What is the composition of the plywood?
- Glue plywood usually refers to the plywood or multi-layer board, that is, with the same thickness of two or more layers of veneer plus glue from high temperature suppression.
- Q: Class I resistant weather plywood Class II water resistant plywood
- slab molding (mixing resin and additives pavement), under hot pressure, so that cellulose and Hemicellulose and lignin plasticized to form a plate.
- Q: How do I determine if plywood contains formaldehyde?
- At the same time, in the purchase of furniture, try to choose the wooden rather than plywood production
- Q: Plywood is a common material for furniture?
- With the veneer after the wood by the direction of the criss-cross the composition of the slab, heated or not heated under the conditions of suppression.
- Q: Furniture solid wood and plywood which is better? Such as bed `wardrobe` TV cabinet `table
- on the requirements of the multi-layer solid wood flooring as strict, which is our daily common plywood or plywood bending reasons.
- Q: What are the processing defects of plywood?
- Edge defects at the edges of the panel due to sanding, sawing or collision caused by the corner defects.
- Q: Class III resistant tide plywood class IV tonic resistant plywood
- It is usually made of odd-numbered veneers and The fibers of the adjacent veneers are perpendicularly bonded to each other
- Q: What is medium density fiberboard
- Plywood commonly known as three plywood, five plywood, nine PCT board, twelve PCT board and so on
- Q: Plywood in the processing of defects
- Lap overlap The adjacent two sheets (or two parts of a single veneer) overlap each other in the same board
Send your message to us
Plywood 1/2 with Poplar Material for Concrete Casting and Recycling
- Loading Port:
- Shekou
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m³
- Supply Capability:
- 6000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords