Q:Does the size of the capacitor affect the power consumption?

The capacitance is the physical quantity that characterizes the capacity of the capacitor to charge the charge.We charge the capacitance of the capacitor by increasing the potential difference between the two plates of the capacitor by one volt.

Q:How does the capacitor work? What does it do?

Straight to pass on the circuit need to pass the AC signal, power supply filter, cut off DC and other places to use. Capacitor charge and discharge is the basis of other properties. There are two kinds of filtering, one is the power filter, which is more obvious charge and discharge, can be seen as a container.

Q:Does anyone know the difference between the stray inductance of the capacitor and the parasitic inductance?

This impedance can not be ignored in the presence of high frequency current, with particular note that the bypass capacitor needs to pass through the two vias when connecting the power plane and the formation so that the parasitic inductance of the vias is multiplied.

Q:How to judge the capacitor is good or bad?

Multimeter selection R × 1k block. Both triodes have a beta value of 100 or more and a small penetration current. Can choose 3DG6 and other types of silicon transistors composed of composite pipe. The multimeter's red and black test leads are connected to the emitter e and collector c of the composite tube, respectively.

Q:What is the principle of capacitance isolation?

The structure of the capacitor is two plates, separated by a layer of insulator, so under normal circumstances the capacitor is no current through (unless the middle of the insulation was breakdown).

Q:Is the capacitor attached to the carbon foil positive?

Electrolytic capacitors of the positive plate with aluminum foil, immersed in the electrolyte for anodic oxidation treatment, aluminum foil surface will produce a layer of aluminum oxide film, the thickness is generally 0.02 - 0.03μm. This layer of oxide film is positive and negative insulation between the plates.

Q:What is the relationship between capacitance and voltage?

when you charge 5v, want to be in the first The capacitor is full, the second capacitor half; if you charge a higher voltage 6v, then the first capacitor to diffuse out, the actual performance of the capacitor was breakdown!

Q:On the ground resistance, what role the capacitor

Decoupling: The capacitor used in the decoupling circuit is called the decoupling capacitor. This capacitor circuit is used in the DC voltage supply circuit of the multi-stage amplifier. The decoupling capacitor eliminates the harmful low frequency cross-connection between the amplifiers.

Q:Use capacitance to do transformer how to calculate

Similarly, we can also 5W / 65V bulb and 1uF capacitor series connected to the 220V / 50Hz AC, the bulb will be lit, and will not be burned. Because the 5W / 65V bulb operating current is also about 70mA. Therefore, the capacitor buck is actually using capacitive current limiting. While the capacitor actually functions as a limiting current and dynamically distributes the voltage across the capacitor and the load.

Q:How to identify high voltage capacitors is good or bad

This is a special place for high voltage capacitors in microwave ovens. Because in this capacitor in parallel with a 10M capacitor. So the capacitor does not leak when the final resistance is 10M. Not infinity