LED Tube Lighting,LED Tube Light,LED Cabinet Light competitve price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1,the specification of the LED Tube Lighting,LED Tube Light,LED Cabinet Light : Ambient Temperature: -40- 60 degrees Celsius, Power Consumption:max 22
Led T8,led tube light,led tube lighting,led tube,T8 led tube,led office lighting,led fluorescent light,led fluorescent lamp,LED Replacement Tubes,LED Tube Lamp,LED Tube 8,T8 LED Tube,T8 LED Flourescent Tube,LED T8 Tube,LED T8 Tube Light,LED Commercial Light,LED Commercial Lighting, led light tube,led lamp tube, led fluorescent tube, LED Fluorescent Tube Light, replacement led lamp, T8 Fluorescent Light, LED Replacement Tube Lamp, LED T8 Lighting
2,Features of led tube lighting
1) Working Voltage: 90-264V
2) Total: 200 pcs super bright LEDs for 1.2meter and 100 pcs for 0.6 meters, 250 pcs for 1.5 meters
3) Light output: max output:1500lm
4) Ambient Temperature: -40 ~ 60 degrees Celsius
5) Power Consumption:max 22W
6) Diameter: 2.54cm, length: 60cm/120cm/150cm,Net weight:0.497kg for 120cm
7) Can be directly placed in conventional T8 or T10 fluorescent brackets, remove ballast
and starter before replacement!
8) Color temperature: 5500K~6000K, 4000K~4500K, 2800K~3300K
9) High performance SMD led:low light degradation,up to 75% lumen maintenance after 35.000 hours operating
10) Zener Diode applied to avoid full set of leds defect
11) Special artwork:Anodize aluminum back hoursing
12) Plastic end caps ensure to pass 4000V HI-POT test
13) Unique thermal management:Aluminum back casing dissipate the inside heat efficiently
14) High power factor:0.95
3,Applications of the led tube lighting
Replacement for conventional fluorescent tubes
4,related products show
5,FAQ
1. What are your market reach throughout the region?
Our markets around the world in every corner, we have six years of experience in foreign trade.
2. What is your main product line is made?
We mainly produce led application classes and industrial lighting fixtures. Including daily life indoor lighting.
(led tube,led downlight, led street light,led high bay light, led flood light, more)
3. Are you factory or trading company?
We are a factory, we provide OEM services. Some famous foreign supermarkets and we often collaborate.
4. You have the ability to do independent research and development?
Our engineering department have 6 people, we have the research and development capabilities.
We also collect regularly each customer feedback, product improvement and new product development.
We also hold monthly new product launches.
5. If I have a question I would like advice on how to contact you?
You can directly through major inquiry and send e-mail to us.
6. What will you provide services?
If you do not mind, you can tell us the following information, you are factories, wholesalers, purchasing, dealers,consumers or do engineering, design, or home. We can provide a detailed explanation to you. You will also patiently answered every question. We have established a customer complaint side, if you are not satisfied with our service,you can directly tell us via e-mail or telephone. We answer all questions for you.
- Q: Ordinary fluorescent lamp ballast can be replaced with led daylight lamp tube
- In the process, the ballast is torn down, and the two broken wires in the ballast are connected directly to the wire by the color of the broken end wire. Red is red. The other two colors are connected. Remove the regenerator. The broken line between the two ends of the regenerator needs to be reconnected and wrapped in insulation tape
- Q: The two ballast that originally was electric inductance towed three ordinary fluorescent lamps, now changed to LED fluorescent lamp tube, have influence?
- Yes, inductance connection to the tubes of the rectifier takes inductance, but LED bulb as long as the end of the power supply directly to access to the power supply is ok (after which two feet to look at the instruction of GeChang)
- Q: The difference between an LED tube and a daylight lamp
- A diving LED tube is usually blue. You are? This light is useful for red grass and sea water tanks. You don't need a koi. If you want to use a white LED lamp mixed with a light-colored LED lamp or a red, blue and green light bulb. Red, blue and red blue (purple) mixed light is bad for viewing. Add a white light blend. You can't raise the two kinds of fish that you raise, and you don't have a lot of light on the lights. As long as it doesn't affect the view, it can continue.
- Q: Can the LED tube be installed as a general lamp holder? It won't burn easily
- Not necessarily, if you buy the lamp belongs to universal, some tubes into line is at one end of the tubes, so again after confirm the specification on the connection mode, when compared with the ordinary lamp holder, if can be general, will not burn.
- Q: Who knows about the fluorescent light of 40w, how many w's LED bulbs can replace or exceed its brightness?
- If you have 40 watts, if the length is 1 meter 2, it should be a T81.2 length LED fluorescent tube. You can measure the length of the lamp with a tape measure. When I changed to LED16.5 watts, I was the equivalent of 60 watts of traditional energy-saving fluorescent bulbs. The brightness must go beyond that
- Q: Why don't leds and light bulbs adjust brightness by dimming switches
- LED fluorescent lamp screen is the power supply failure in the lamp tube, the power transformer circuit has a problem. Fluorescent lamp flash screen. It may be that the regenerator is too long and the tube is too old to light up
- Q: What is the minimum starting voltage for the fluorescent tube?
- The fluorescent lamp is under the influence of the ballast, the voltage is 810 volts. 810 volts is transient and can only be observed with a digital oscilloscope. I measured the data in three different meters, and the data doesn't really have the same data.
- Q: How does the LED fluorescent lamp tube be fixed with the aluminum plate in the tube?
- I'd better draw it. It's not all riveting, for example, using glue to press the aluminum plate to the top
- Q: Feasibility analysis report of LED lamps
- With the advent of ultra bright white leds, applications in lighting have become possible. According to the international authorities, the 21st century will enter the era of new lighting, which is represented by leds, and is called a fourth generation new light source. At present, the lighting consumption accounts for about 20% of the whole power consumption, reduce lighting electricity is an important way to save energy, in order to achieve the goal of the industry have developed many kinds of energy-efficient lighting apparatus, and achieved certain results. However, the requirement of "green lighting" is not enough, and it is imperative to develop and apply a new source of efficiency, reliability, safety and durability. LED with its inherent superiority is attracting the world's attention. According to the forecast the U.S. department of energy (doe), around 2010, the United States will have 55% of incandescent lamp and fluorescent lamp is replaced by LED, power saving value of up to 35 billion dollars a year, may become a $50 billion industry. Japan suggested that leds would replace traditional incandescent lamps in 2006. LED development history has for decades, but the application in the field of lighting and new technology, but with the rapid development of LED technology, gradually improve the luminous efficiency, LED the market will be more widely used, especially in the rising again under the background of global energy shortage, the LED in lighting market prospect is more highly attention around the world, is considered by the industry in the next 10 years to become the most promising markets, as well as the biggest markets will be replace incandescent lamp, the greatest potential for tungsten filament lamp and fluorescent lamp.
- Q: The ledt8 lamp is used for the light bulb
- LED T8 lamp, also called T8 LED fluorescent lamp, is a common light fixture in LED lighting lamps. It is the shape of the tube, elongated, eight one 8 of an inch in diameter, namely an inch, about 25.4 mm, similar to common fluorescent tube, except that it is on the back of the aluminum alloy heat dissipation, positive USES the PC cover instead of the glass. The LEDT8 lamp is powered by a low voltage dc, which is not directly connected to the market, so it needs to bring a power supply to reduce the voltage, and then connect to the market. LED T8 lamp tube adopts the latest fourth-generation light source, energy-saving and environmental protection, is the development direction of future illumination.
Send your message to us
LED Tube Lighting,LED Tube Light,LED Cabinet Light competitve price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
