LED Street Lights High Efficency JMJX-80
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Datasheet:
Rated Power | 80W |
LED chip | 3W/pc |
LED Q'ty | 48pcs |
Color temperature | 4000-5500K |
Voltage/Frenquency | AC 100-260V/50-60Hz |
Power factor | 〉0.97 |
LED effiency | 145-150lm/w |
Lamp's effiency | 〉92% |
IP rate | IP65 |
Lifetime | 〉80,000hrs |
Working temperature | -30 ~ +65ºC |
Lamp body material | Alu. alloy |
Pole height | 9M |
Central illumination | 48lux |
Pole to pole distance | 40m |
Lamp size | 640x380x180mm |
Net weight | 9.9kgs |
Product Description:
1.Adopting wind generator or solar panel generating energy to make battery constant voltage , control current and charge automatically.
2.It will be at the state of protection according to the checked voltage of the battery.
3.It will protect automatically when the current is high supplied by battery, which make your battery at the best state of charging and protection and is good to Charging saturation
4.Property is good, visual display, and easy to operate
5.Unique design and encharge the lumen
Product Advantages:
1. Powered by DC current
2. Long granty time
3. High effiency and low time of usage
FAQ
1. What is your payment terms?
We accept T/T payment, normally we need 30% T/T in advance, 70% payed before shipment.
2. What is your packing system?
The products will be packed in wooden boxes.
3. Can you do OEM service?
We acept OEM, but it has to be checked with the order quantity.
- Q:What is the difference between the brightness and illuminance of LED street lights and the brightness and illumination of ordinary high-pressure sodium lamps?
- There are differences, LED lights brightness and illumination will be greater, Zhongshan Ming inter lighting is specializing in the production of lightsAnd other outdoor lamps.
- Q:How to use ZigBee intelligent LED street lamp
- Because every time there is a street lamp, through the method of adding repeaters, ZigBee can now add more than 60 thousand devices for a city should not be a problem, if more street number more than 60 thousand, can be divided into several pieces respectively. In general, the distance from each repeater is about 70 meters, and it will be better if there is no blocking outside, and hundreds of meters are no problem at all. If the effect is not good, you can add a repeater in the middle to resolve it.
- Q:What are the requirements of the LED street lamp chip? How big is it? How many will it take and how big is the distance between them?
- To single words, whatever you want a few watts, is generally the number of beads multiples of 7. A single chip is usually 45U, specifically you want what brand, the price is not the same.
- Q:Does the LED street lamp 80W or 100W need to be compensated by a single light capacitor?
- Capacitor compensation is reactive power compensation or power factor compensation. The power system of electric equipment in use will produce reactive power, and is usually inductive, it will make use of the capacity of power efficiency, and by increasing the capacitance of the way properly in the system can be improved.
- Q:Constraints on LED street lights
- The development of the domestic LED light source relative to foreign technology started late, from the international leading industry there is a certain distance, although the domestic LED light source theory of life can reach 100 thousand hours, but because of the heat problem cannot be solved completely and effectively, so that the actual life of large discount; unstable power supply system: LED driver power supply is the industry consensus in fact it is not stable, on the LED lighting industry back, because the driving power supply is an important part of the LED street lamp, which will lead to failure of the whole lamp fault. Due to poor reliability of power installed street lights are likely in a short period of time will be bad, the LED street lamp this outdoor height device, difficult installation, maintenance more difficult, for the lamp manufacturers, power supply instability makes the rising cost of maintenance.
- Q:Is there a place where trees can hold LED solar street lamps?
- Yes, solar street lights are not covered by trees
- Q:How to calculate the radiation area of solar LED street lamp
- This is a problem that has not been solved yet. The usual way is to use the illumination curve provided by the lighting plant and calculate the height of the street lamp and the area under the prescribed illuminance according to the illuminance requirements of the road surface.
- Q:What are the after-sales service of solar LED street lamps?
- Check whether the current is good waterproof and lightning protection measures, whether the goods meet the delivery samples, construction lights, and related lamps and materials standards, to prevent the injection of defective products, reduce labor, and strive for a qualified acceptance. These are personal opinions, and the work may still need to be done. I am here for the time being, and leave it to other friends
- Q:What happens if the LED street is ungrounded? Is it a big problem?
- The LED itself is very sensitive to lightning surge currents, which can cause damage to the human body by electrostatic touch and burn chips or leads. Therefore, the street lighting circuit must be grounded.
- Q:Features of LED street lamps
- 2, LED street lamp has a unique two optical design, the LED street light exposure to the required lighting area, further improve the lighting efficiency, in order to achieve energy-saving purposes.3, LED has reached 110-130lm/W, and there is still great room for development, the theoretical value of 360lm/W. The luminous efficiency of high pressure sodium lamp is only increased with the increase of the power, therefore, the overall optical efficiency of LED lamp is better than high voltage sodium lamp; (the overall efficiency of light is theoretical, light effect actually more than 250W higher than that of LED high pressure sodium lamp).4, LED street light color is much higher than that of high pressure sodium lamp, high pressure sodium lamp color index is only about 23, while the LED lamp color index reached more than 75, from the point of view of visual psychology, achieve the same brightness, illumination LED lamp can average 20% lower than high pressure sodium lamp,.5, a small decline, a year decline of less than 3%, 10 years still reached the requirement of road, and high pressure sodium lamp failure, a year has decreased by more than 30%, therefore, LED lamps used in the design of power can be lower than high pressure sodium lamp.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
LED Street Lights High Efficency JMJX-80
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords