LED Street Lights High Efficiency JMLX-180
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Datasheet:
Coursertech Shooting Star LED Street Light Parameters | ||||||
No. | Model Name | JMLX-60 | JMLX-90 | JMLX-120 | JMLX-150 | JMLX-180 |
1 | Rated Power | 60W | 90W | 120W | 150W | 180W |
2 | Replacement HPS | 250W | 175W*2 | 400W | 250W*2 | 250W*2 |
3 | LED Quantity | 48 | 72 | 96 | 120 | 144 |
5 | LED Chip | American Bridgelux 3W/pc | ||||
6 | Certificates | CE, RoHS, Patents, ISO9001:2008,SGS | ||||
7 | Color Temperature | 4500~5000K | ||||
8 | Beam Angle | 120° | ||||
9 | Input Voltage | AC 85-265V | ||||
10 | Frequency Range | 50-60Hz | ||||
11 | (PF) Power Factor | >0.97 | ||||
12 | Total Harmonic Distance | <15%< span=""> | ||||
13 | LED Efficiency | 140 LM/W | ||||
14 | Lamp’s Efficiency | >95% | ||||
15 | IP Grade | Ip65 | ||||
16 | Working Life | >80000 HRS | ||||
17 | Environment Temperature | -40℃˜~+80℃ | ||||
18 | Light Body Material | Aluminum Alloy | ||||
19 | Pole Height | 7m | 8m | 9m | 10m | 12m |
20 | Central Illumination | 45lux (7m) | 46lux (8m) | 45lux (10m) | 50lux (10m) | 48lux (12m) |
21 | Pole to Pole Distance | 20-25m | 30-35m | 35-40m | 40-45m | 45-50m |
22 | Installing Size | Φ60mm | ||||
23 | Products Size(mm) | 489*315*204 | 580*315*204 | 671*315*204 | 762*315*204 | 853*315*204 |
24 | Packaging Size(mm) | 510*400*270 | 600*400*270 | 690*400*270 | 782*400*270 | 875*400*270 |
25 | Net Weight | 8KG | 9KG | 9.5KG | 11KG | 13KG |
26 | Gross Weight | 9KG | 11KG | 11KG | 13KG | 15KG |
Product Description:
1.Adopting wind generator or solar panel generating energy to make battery constant voltage , control current and charge automatically.
2.It will be at the state of protection according to the checked voltage of the battery.
3.It will protect automatically when the current is high supplied by battery, which make your battery at the best state of charging and protection and is good to Charging saturation
4.Property is good, visual display, easy to operate
5.Accessory, cable lines, fastener, terminal
6.The distance between the lights should not be 35m according to the lumen
Product Advantages:
1. Powered by DC current
2. Saving energy
3. High effiency and low time of usage
FAQ
1. What is your payment terms?
We accept T/T payment, normally we need 20% T/T in advance, 80% payed before shipment.
2. What is your packing system?
We put the sistem in the wooden box.
3. Can you do OEM service?
Yes we can, but we need to do it with a certain order quantity.
- Q:LED street lamp, glass lens, mold opening, research and development
- The two light distribution design must be carried out on the basis of the primary light distribution design of the LED light emitting device. Once, the light distribution design is to ensure the quality of each LED light emitting device, and consider taking the light emitted from the LED chip as much as possible. And the two light distribution design is to consider how to focus the light emitted by the LED device on the desired lighting area, so that the light energy delivered by the whole system meets the design requirements. In a sense, only the packaging design (that is, once the light distribution design) is reasonable, in order to ensure the smooth realization of the system's two light distribution design, thereby enhancing the lighting and display effects.
- Q:Materials required for LED street lamp installation
- In addition to the bulb is not the same, the other did not change greatly, much easier than other lights installed, the current is also small, the line can be smaller.
- Q:Is the power LED lamp constantly flashing? Is it a power supply problem?
- If the outdoor lamp also has strobe, one bright, one extinguishes phenomenon, that is the lamps and lanterns water. The consequence is that the flash doesn't shine. Lamp and driving on the bad, driving water do good, just a broken lamp, light source can be replaced.
- Q:What is the problem of flashing LED street lights on the side of the road?
- Check whether the current limiting resistor in the circuit has changed, or whether the current of the power supply is off the rated value. If it's a different LED flash, it's a LED quality problem that needs to be replaced.
- Q:LED street lights installed on both sides of the road, horizontal installation and angle installation (0~30 degrees), natural convection heat dissipation, that good heat dissipation.
- The angle of heat dissipation is good, because the general hot air will spread upward, and the slope is more convenient for the diffusion of hot gas.
- Q:Where can I buy LED street lamp and aluminum alloy shell, what's the quality of the product? Who can provide?
- Shortcoming:1, LED packaging process is complex2, multi core integrated heat radiating shell is too concentrated, need efficient, otherwise LED decay seriously affect its service life.3, light concentration, LED low luminous efficiency, is currently around 85LM/W4, the use of multi-core string combined with the circuit, compared to a single core package, there is a high probability of reliability problems
- Q:How many kinds of power do LED street lights have? How much brightness can it replace the high pressure sodium lamp? What kind of power does the general main road need?
- There are 60, 90120150200 of the main road should use 90 to 150, 8 to 12 meters of installation height, I do Dialux lighting simulation design is common, yes
- Q:What is the voltage of the street lamp? What about LED?
- LED are generally DC voltage, a wide variety of categories: such as the common 12V-24V, 1.8~3.8V, special 220VAC.
- Q:Is it suitable to install toughened glass cover on the luminous cavity of high power LED street lamp?
- This is expected to affect the heat dissipation of high-power LED, heat dissipation is the most important issue, 100% lighting
- Q:Do you know the assembly process of the LED street lamp?
- Take the 3PCSLED lamp according to the position indicated on the aluminum substrate by the positive and negative poles. In the aluminum substrate one polarity tin, LED polar end and advance good solder welding end, and the other end of the LED welding in another pin LED package on aluminum substrate.Note: the requirements of the spot is full, no solder false, short-circuit phenomenon, the correct position of LED welding. Welding must be fitted with anti-static rings.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
LED Street Lights High Efficiency JMLX-180
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords