Q:The number of lights in the LED string

In general, 1210 specifications of the band is 60 LED per meter, 5050 specifications of the band is 30 LED per meter, the special has 60 LED per meter.

Q:Rated voltage of LED lamp string

When normal luminescence, each LED voltage drop is more than 2 volts, the current is about 15mA, to use 220V direct current should be connected in series with nearly one hundred led, or in the LED circuit series resistance, so that the series circuit current is about 15ma.

Q:Hanging on the tree string lights, each one is 10 meters long, with a controller, I asked the factory with the AB protection, but the manufacturers say that only do the general anti rain, no water, even the rain stop, I want to use plastic wrap, don't know? Which expert can give advice and advice? emergency

If you don't have a shell, it's an open controller, so you can make a waterproof plastic lid and make it waterproof at the front of the O loopYou can refer to the LED waterproof flashlight for inspiration!

Q:What's the price of the LED light string?

On the market now, 3014 of 11lm is often priced at between 0.13-0.16. The lamp has stable performance, good brightness, low luminous decay, and color index is much better. 600x600LED panel light 360 beads, which is about 53 yuan.Are basically using 11x23 or 11x26mil chip, chip /pcs lamp about a penny.

Q:I want to do a string of LED lights that can use batteries. About 55 or so. The lights are 5MM blue. How can I work? Urgent urgent!!

If it is a general common blue LED working current is 20 mA, voltage of about 2.5V can be lit, the battery power can be used in parallel, the benefits of this connection is one of the damage does not influence the normal operation of other LED. And each LED string to a current limiting resistor, LED protection lamp, prolong life, calculation formula of the resistance for V / 0.02A=: voltage current resistance: 3V, battery powered =3 / 0.02=150. You want to supply 55 LED batteries to work together, the total current is up to 0.02x55=1.1A, i.e. 1AH (ah) capacity of the battery can work 1 hours or so.

Q:Led full-color light string and how to control wiring

Four line color data signal exposed lamp connected: lamp electrode with GND surface control signal is connected with the DAT clock with CLK

Q:The color temperature of LED light string

Light source temperature is different, light color is also different:The color temperature is below 3300K, the color is red, and gives a warm feeling. There is a sedate atmosphere and a warm feeling.The color temperature is in the middle of 3000--6000K, and there is no obvious visual psychological effect in this hue, and there is a refreshing feeling. It is called neutral color temperatureColor temperature exceeds 6000K, light color slants blue, give a person with cool feeling, commonly referred to as cool color temperature.

Q:How do you connect the LED lights?

LED lamp can string together end to end, with more than 24 fluorescent lamp series, bulb lamp with 5X1W5 lamp series, and 6 series and 14.

Q:What are the power connections for the LED light string?

LED lamp string power connection method: LED light string, general voltage is DC 12V, so need to use switching power supply, power supply according to the size of LED light string and connection length to decide

Q:Example: if I want to do a 40 head low voltage lamp string, do 10 lights, 1 loop, transformer is 150MA, then how can I calculate the resistance? The grid is 60 Hz of China's power grid! Give a formula, and then count the examples. What is it?! Thank you

In general, LED lamps need constant current to drive, and the voltage may be adjusted according to the aging degree of the LED lamp.