LED bulb remote controller 2.4G remote controller RF remote control
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
This product is form a complete set the company RGBW LED bulb lamp (6 W / 9 W) is used. Remote control uses 2.4 G high frequency wireless transmission technology, with low power consumption, remote control distance, strong anti-interference ability, high rate of air communication etc.Fashion and beautiful appearance, the function is practical and simple manipulation, adopts the design of capacitive touch, at the same time, has the rich that move light, color, and other functions.
Technical Parameters
content | parameter | content | parameter |
Supply Voltage | 3V，2*AAA battery | Transmission power | 6db |
Transmission frequency | 2400-2483.5MHz | Standby power consumption | 10uA |
Modulation method | GFSK | Remote control distance | 20-30m |
External dimension | 120×52×20mm |
External dimension
The function of remote control
“M” dynamic mode table:：
NO. | Mode | Brightness state | Speed state |
1 | 7 colors fade | adjustable | adjustable |
2 | White fade | adjustable | adjustable |
3 | Red green blue white 4 colors fade | adjustable | adjustable |
4 | Red green blue white 4 colors jump | adjustable | adjustable |
5 | 8 colors jump（7 color+white） | adjustable | adjustable |
6 | Red light fade and flash | adjustable | adjustable |
7 | Red light fade and flash | adjustable | adjustable |
8 | Red light fade and flash | adjustable | adjustable |
9 | Full automatic play mode | adjustable | adjustable |
Function of the instructions
Application scenarios
- Q: Ordinary lamp LED bulb can?
- As long as the inside of the interface is the same, for example, the E27 interface (ordinary spiral, that can be installed energy-saving lamps) installed there is no problem, LED bulb is now a lot of 110V-220V high voltage power supply, so the stability is very strong, the key is to save electricity, saving seventy percent than the energy-saving lamp, no effect, ease of use.
- Q: What's the cause of the noise during the aging of LED bulb bulbs?
- This should be the power problem. It's easy to make a noise because there are so many parts of the power supply.
- Q: What are the driving IC used in LED bulb?
- The analysis report shows that nearly three years, the domestic market share of LED lamps will increase from 5% to about 20%-30% can be seen, LED is now the need to walk into the homes of ordinary people, so we need to control the cost, cost is the main driving power LED lamp and a shell, a power driven material faster BOM province can let the promotion of LED. As the LED lamp has the characteristics of energy saving and environmental protection, the state has also subsidized the product accordingly.
- Q: What's the reason for the LED bulb strobe?
- If this resonant characteristic causes the input current to fall below the TRIAC sustaining current, the TRIAC will turn off. After a short delay, the TRIAC usually switches on and fires the same resonance. In the 1.5 cycle of the input power waveform, this series of events may be repeated several times to form visible LED flashes. To cope with this problem, a key requirement of TRIAC dimming is that the input capacitance of the EMI filter is very low and that the capacitor is decoupled through the TRIAC and the winding impedance. According to the formula, if the capacitance of the dimming module is reduced, the resistance of the resonant circuit can be increased, and the oscillation is suppressed in principle, and the desired circuit work is resumed.
- Q: What is the AC voltage of the LED bulb?
- The AC voltage of LED bulb is usually 220V, and the power is divided into 3W, 5W, 7W, 8W, 9W, 12W and so on.The biggest market for LED bulb lighting is the civilian market, and the LED bulb is a new green light source to replace the traditional incandescent bulb. LED lamp has the advantages of energy saving, environmental protection, long service life, no stroboscopic, green and so on.
- Q: LED bulb bulbs, do you need 3C certification now?
- No, this is a light source, not a lamp. It can only be CQC voluntary certification
- Q: What are the characteristics of LED bulb?
- Energy saving research data show that, as LED is a cold light source, semiconductor lighting itself has no pollution to the environment, and compared with incandescent lamps and fluorescent lamps, the power saving efficiency can reach more than 90%. Under the same brightness, the power consumption is only 1/10 of ordinary incandescent lamp and 1/2 of fluorescent lamp tube. If we replace 50% of our traditional lighting with LED at present, the amount of electricity we save every year will be equivalent to the sum of the total power generated by the Three Gorges power station, and the energy saving benefits will be considerable. LED, the lightning man at home, is pretty good
- Q: Is it possible to manually weld LED bulb bulbs?
- If you can guarantee that you can add thermal grease just fill the gap without obstructing the normal contact, it is useful, but this process is very difficult for you to do, and the theory can improve the thermal efficiency of thermal grease, but actually you are not up to the process it is possible to reduce the thermal efficiency, you added more is to seek psychological comfort, you can on the heating plate welding of light, with one side of the thermal grease solder, such thermal effect is better
- Q: LED bulb lamp. Is there a good drive or no drive? Is the lamp of good or integrated?
- Depending on your application and cost, there's no way to say which is absolutely good;If the occasion is appropriate and the cost is not urgent, buy a drive.
- Q: Will the LED bulb, T8, T5 lights, radiator lamps, is the hotter the better? What's the regular temperature? What are the common heat release materials? Specifications?
- If the material with better thermal conductivity, the lamp shell about 60 degrees is best.Reason:1: if the temperature is too high, that your radiator is too small.2: if the temperature is low, indicating that your calories did not lead out. (of course, if the radiator is too large and the temperature is low, but the bulb and tube are too heavy to pass by certification)
Send your message to us
LED bulb remote controller 2.4G remote controller RF remote control
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
