Double Sided Tissue Tape DS3-110H
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- Ten Containers Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Double Sided Tissue Tape DS3-110H
1. Applications:
Courier envelope sealing, flying splice operations on papers and cardboard, leather and fabric bonding and positioning in shoe and baggage industry, sheet fixing and bonding in toy industry, stationery, advertisement, computer embroidery, packaging and foam laminating.
2. The products should be stored at room temperature and be kept away wet and/or heat source.
3. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
5. Special requirements will be satisfied after communications.
Technical Data of Double Sided Tissue Tape DS3-110H
CONSTRUCTION:
Carrier: Tissue paper
Adhesive: Solvent based acrylic
Liner: Silicone release PE-coated paper, white colour.
TYPICAL PHYSICAL PROPERTIES:
Total Thickness (adhesives + tissue): 110 ± 5 micron
Initial Tack (14# steel ball): ≤ 100mm
Peel Adhesion (Kg/25mm): 2.1 ± 0.2Kg
Holding power: ≥ 150 min
PACKING of Double Sided Tissue Tape DS3-110H
Core I.D.: 3” (76mm±1)
Jumbo Roll:1.02 x 1000m; 1.24 x 1000m
Packaging:Wrapped with corrugated cardboard.
Cut Roll: roll width 3mm up
Remarks of Double Sided Tissue Tape DS3-110H
The data above are typical results and subject to change without notice.
Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
The products should be stored at room temperature and be kept away wet and/or heat source.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q:What are the general use of double-sided tape?
- Oily double-sided adhesive, mainly used in leather goods, pearl cotton, sponge, shoes products, such as high viscosity. Embroidery double-sided adhesive mainly used in computer embroidery.Computer embroidery special, sticky strong, repeated use more frequently.
- Q:The advantages and disadvantages of the mesh double sided adhesive tape, and the influence of the density of the mesh on the adhesive tape.
- Peel strength is high, tensile resistance is large, and it will not cause deformation when shearing;Waterproof, leakproof, moisture-proof, anti-corrosion, insulation;It is resistant to oil, corrosion, aging and environmental protection.The mesh double sided adhesive produced by Shanghai Yao adhesive tape, the density of the mesh determines the tenacity and strength of the adhesive tape.
- Q:Double sided tape how to cut well, master with automatic cutting table, cut out, all askew, what reason, what should pay attention to?
- Apart from the factors of the machine, there are many other factors that affect the quality of slitting tape. For example, the material, some of the paper is of poor quality and easy to edge. And rewinding the tape itself is in place, if too loose, cutting out easily spread, roll core is easy to fall off, too easy to cut out the bowl etc.. Like this, you have to rewind it and keep the tension under control.
- Q:Construction method of butyl adhesive tape
- Single sided non-woven fabric, Yongxing adhesive tape, method of use(1) after the lighting board is installed on the frame, the lighting board seam will be bound and the parts of the adhesive tape will be wiped clean.(2) open the adhesive tape in the joint of the lighting board, then tear off the insulating paper on the edge of the compacted adhesive tape, and then install the aluminum alloy board on the lighting board. Secure with a waterproof screw.(3) on the lighting board and the wall joint, use one side aluminum foil adhesive tape to bond directly. 1, construction requirements(1) the performance indexes of tapes should be read carefully before construction so as to be suitable for the environmental temperature and humidity during construction.(2) according to different waterproofing membrane, different construction methods, choose different types, specifications of different sizes of Yongxing tape.(3) before construction, the quality of the aforesaid project shall be checked and accepted, and the waterproof layer shall be constructed after qualification.(4) according to the requirements of the engineering design and construction waterproofing, waterproofing and leveling layer bonded firmly, do not allow Konggu phenomenon, after the construction of waterproof layer should be protected.(5) the use of Yongxing parapet should pay attention to the tape, brick or concrete surface bonding parts of the firm and smooth surface, such as the poor, the application of cement paste for repairing yarn
- Q:What is an engraving tape?
- 1., using high strength synthetic rubber as base cloth, strong toughness, not easy to break
- Q:How much is the two-sided adhesive tape for industrial use? How to choose?
- There are dozens of tapeThere are too many kinds,I don't know what you're talking aboutTape or?. TapeTwo or three dollars, one.
- Q:Double sided with sun flower on the center console of car
- Very simple, buy a roll of transparent adhesive, adhesive tape will do, paste you have double-sided adhesive place, and then put it after tearing, repeated a few times you can stick it offThis is a very good method, very simple and practical, easy to save trouble. I used, good, support
- Q:There is double adhesive mark on the back shell of mobile phone. How can I clean it up?
- 2, with an eraser along the edge of a little to rub inside, easy to trace. But depending on the degree of viscosity, time may vary. The alcohol or eraser works very well if you have the condition.
- Q:What kind of double faced glue is used at the bottom of the glass panel and the glass panel? How do you glue it?
- The double sided adhesive tape between the panel and the bottom shell of the cooker is mainly used for sealing and damping, and the cooker is seldom used as the main connecting piece. As far as the cooker industry is concerned,
- Q:What adhesive tape is used on the heating wire on the electric blanket?
- Conductive heat conduction flame retardant adhesive tape, sealing waterproof adhesive tape, wear-resistant lubricating adhesive tape, etc.. And all kinds of adhesive products of new product development and die cutting processing.
1. Manufacturer Overview |
|
---|---|
Location | Shanghai, China |
Year Established | 2008 |
Annual Output Value | US$ 2 Million |
Main Markets | 20.00% North America 20.00% South America 10.00% Eastern Europe 10.00% Southeast Asia 10.00% Northern Europe 10.00% South Asia 10.00% Western Europe 5.00% Africa 5.00% Mid East |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai, Port |
Export Percentage | 35% - 50% |
No.of Employees in Trade Department | 11-50 People |
Language Spoken: | English; Chinese; |
b)Factory Information | |
Factory Size: | Above 10000 M2 |
No. of Production Lines | Above 3 |
Contract Manufacturing | OEM Service Offered |
Product Price Range | High; Average |
Send your message to us
Double Sided Tissue Tape DS3-110H
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- Ten Containers Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products