CONSTRUCTION:

Backing: EVA Foam (Black/White)

Adhesive: Hot melt rubber adhesive.

Liner: White/Yellow

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + backing): 3 mm

Initial Tack: ≥12# (steel ball)

Peel Adhesion: more than 20 N/25mm (to steel)

Holding power(hrs): 50

Elongation(%): 100

Temperature resistance: 60 Degree Celsius

Sizes:

Jumbo Roll: 1.00 x 100m

Cut Roll: As per customer’s requirements

Application:

Holding of minor objects, bond between rough surfaces, reduce vibration & shock.

Bond & adhesion of various hooks, boards, mirrors.

Remarks:

1.  The data above are typical results and subject to change without notice.

2.  Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

           Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.  The products should be stored at room temperature and be kept away wet and/or heat source.

4.  It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.  The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.