Q:What are the 3M double-sided adhesive?

3M double-sided adhesive classification1, according to the characteristics are divided into double-sided adhesive, single-sided adhesive;2, according to the substrate points:Non-woven fabric substrate double adhesive (made of non-woven fabric substrate, double coated with acrylic rubber): such as 3M9448, 3M9080, 3M9075 and so on;

Q:How do you apply double-sided adhesive tape?

7, in the printing process to clean the printing plate, should avoid cleaning solvents, contact tape, so as not to damage the tape;8 when the plate is removed from the tape, the angle between the plate and tape shall be no more than 90 degrees.9, the interface version of the place to stay 5mm or so, the use of 3M 1600 electrical insulation tape seal version of the effect is good, you can effectively avoid wiping the plate caused by the interface version of the resulting ink pollution, and very economical.10, double-sided adhesive over repeated use can produce overprint bad phenomenon, especially in the new situation, and used for a long time in registering are likely to happen.

Q:What is oily double-sided adhesive, oily double-sided adhesive, what are the uses?

Application: suitable for arc surface sticking, stamping and compound pasting. Widely used in clothing, shoes and hats, leather, bags, embroidery, posters, signs, envelopes, decorations, electronic products and household appliances, etc., the use of simple and convenient.

Q:What are the features of black double adhesive tape?

Use:Shading. Apply to fixed LCD, backlight, templates and other four weeks around the link.Such as: microphone dust net, LCD reflective film parts fixed, the backlight module paste.Black masking tape, PET masking tapeBlack masking tapeBlack single / double sided adhesive tape with shading function is made of black film made of unique printing technology. It has excellent shielding and insulation properties. It is suitable for LCD and backlight source.

Q:How to remove double adhesive on paper?

Another piece of paper by hand with double-sided adhesive pressed together, gently from the original paper on the double glue opened a nod, and a piece of paper then pinched together, slowly can put off the double-sided adhesive from the original paper.

Q:Double sided adhesive tape for flexographic printing machines

Personal experience: narrow side machine (cascading machine / CEA / yigaofa / Olger / Omet / Jimmy Andy etc.) recommend the use of the common type of TESA, TESA52015/52017 (0.38mm) TESA4963 (0.1mm) in Southern China District of Guangzhou Jiaqi TESA agents. Advantages: good, not easy version of Alice colloidality, reuse rate, good stability and low price.Disadvantages: not easy to tear the plate. It is easy to produce bubbles when the joint is not fit properly.3M mounting tape has the advantages of common specifications: 3M1015/1115/1020/411DL, good stability, easy to rip version, another 3M-E1015H tape used in wide side machine and a sleeve is not easy to have a bubble, to provide printing quality.

Q:There is double adhesive mark on the back shell of mobile phone. How can I clean it up?

3, with the removal of nail polish, paint off the nail, try the oil, but because this water may make the original words will also fall off, so I suggest now small blocks of inconspicuous places to try.4, with chewing gum can also be glued down, you can try.

Q:What about double white, white and yellow?

White and yellow are the same. The key is the difference in viscosity

Q:Especially for tape demanding products or areas, it is best to import adhesive tape industry, thank you!

Some need strong adhesive force, such as advertisement, door industry, clothing printing, etc.. Some face to withstand high temperatures, such as electronic and electrical equipment industry, automotive industry. If you want to do it, you must understand your product performance.

Q:Will double face adhesive affect its stickiness in summer?

Check whether the edges of the double adhesive tape are adhered or not, and whether or not the bottom sheet is leaking of siliconDouble adhesive tape edge adhesion or some parts of the bottom sheet leakage of silicone oil, in the processing process will cause waste paper rupture, can not be normal production. Therefore, before processing, take a length of about 1 meters of self-adhesive materials, hand peeling, to see whether the edge or other parts of the smooth, uniform peeling of the parts. Usually, paper and paper edge bottom adhesion occurred in a roll coating adhesive material cutting volume, and generally occurs only in the outer layer of 7 meters to 10 meters, so the drum encountered double-sided tape cutting edge with adhesion, don't immediately assert that the whole roll of paper have this problem.Also note that stripping light weight tissues (such as 60g/m2 and 80g/m2 facial tissue) is more powerful than peeling off heavy paper, and the lighter the paper, the more tightly it feels. Because of this, sometimes, according to the customer's request to cut the shape of the customer's choice of double-sided tape, can not be completed at the regular processing speed.