CNBM PV Modules Made in China for exporting

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT or LC
Min Order Qty:
1 pallet
Supply Capability:
100000000 pallet/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Description:

We import solar cells fromTaiwan’s Motech, with this CO inTaiwanand our CSA certification; we also sell goods to areas with anti-dumping laws such as theUSA. Our main products are solar panels, off-grid and on-grid solar home systems, solar street lighting systems, solar water heating systems, solar pumps, solar attic fans, solar DC LED lights and solar DC refrigerators.

 

Product Features:

•    High efficiency crystalline solar cell: Even if under weak light, the solar module can produce maximum power output.

•    Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

•    EVA and TPT: Using high quality EVA and TPT to prevent destroying and water damage.

•    AI frame: Without screw, corner connection. There are six holes on the frame, which can be installed easily.

•    Junction box: Multifunction waterproof junction box.

•    Long lifetime: +25 years; lower power decrease.

•    Quality performance of preventing from atrocious weather such as wind and hails.

•    Resists moisture and etching effectively, not effected by geology.

•    The certificate issued by international authority: UL, TUV, IEC, VDE, CE.

•    Rigorous quality control meets the highest international standards.

•    High-transmissivity low-iron tempered glass, strong aluminum frame.

•    Using UV-resistant silicon.

•    IS09001/14001/CE/TUV/UL 

•    Warranties

-        10 years limited product warranty

-        15 years at 90% of the minimal rated power output

-        25 years at 80% of the minimal rated power output

  

Product Applications:

·         Annealing furnaces

·         Furnace door linings and seals

·         Soaking pit covers and seals

·         Furnace hot face repairs

·         Reheating furnace and ladle covers

 

Product Specifications:

Minimum Order Quantity:

1 pallet

Unit:

pallet

Loading Port:

Tianjin

Supply Ability:

100000000 pallet/month

Payment Terms:

TT or LC

Package:

Wooden Pallet

 

ITEM NO.:

Poly 156*156 cell, 60pcs. Power range from 230Wp-260Wp

Maximum Power (W)

230

235

240

245

250

255

260

Optimum Power Voltage (Vmp)

29.4

29.5

29.7

30.1

30.3

30.5

30.7

Optimum Operating Current (Imp)

7.83

7.97

8.08

8.14

8.25

8.37

8.48

Open Circuit Voltage (Voc)

36.7

36.8

36.9

37.1

37.3

37.5

37.7

Short Circuit Current (Isc)

8.52

8.59

8.62

8.65

8.69

8.73

8.78

Solar Cell:

156*156 Poly

Number of Cell (pcs)

6*10

Name of Solar Cells

Polycrystalline Cell

Size of Module(mm)

1650*992*40/45/50

Cable & Connector Type

Pass the TUV Certificate

Frame

Aluminum-alloy

Back Sheet

TPT

Weight Per Piece(KG)

19.5KG

FF (%)

70-76%

Junction Box Type

Pass the TUV Certificate

Tolerance Wattage (e.g.+/-5%)

±3%, or 0-3%

Front Glass Thickness(mm)

3.2

Temperature Coefficients of Isc (%)

+0.04

Temperature Coefficients of Voc (%)

-0.38

Temperature Coefficients of Pm (%)

-0.47

Temperature Coefficients of Im (%)

+0.04

Temperature Coefficients of Vm (%)

-0.38

Temperature Range

-40°C to +85°C

Surface Maximum Load Capacity

5400Pa

Allowable Hail Load

23m/s ,7.53g

Bypass Diode Rating(A)

12

Warranty

90% of 10 years, 80% of 25 years.

Standard Test Conditions

AM1.5   1000W/ 25 +/-2°C

Packing

carton or pallet

1*20'

14 Pallets / 316pcs

1*40'STD

25 Pallets / 700pcs

 

Product Images:

 

CNBM PV Modules Made in China for exporting

 

FAQ:

Q1: Why buy Materials & Equipment from OKorder.com?

A1: All products offered by OKorder.com are carefully selected fromChina's most reliable manufacturing enterprises. Through its ISO certifications, OKorder.com adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.

 

Q2: How do we guarantee the quality of our products?

A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.

 

Q3: What other products does OKorder.com offer?

A3: We offer a full range of refractory bricks, mortar, cement, ceramic fiber products, and more.

 

Q4: Where is Ceramic Fiber products used?

A4: Ceramic fiber products have many advantages, including: high temperature stability, lightweight, superior insulation, and ease of application. Fiber products are available in a variety of product forms to solve a range of thermal management application problems across various industries. The main industrial market segments that use ceramic fiber and soluble fiber products are the aluminum, iron, steel, heat treatment, power, incineration, boilers, and glass industries.

 

Q5: What kind of Ceramic Fiber should I use?

A5: When selecting the fiber type for a particular application, it is important to consider all factors. If the fiber/fabric will not have to support a load at temperature, the lower-cost industrial grade fibers may be appropriate. However, if the fiber will be load bearing at temperature as in ceramic matrix composites, then one of the composite grade fibers would be a better choice. Of course there may be other factors, such as corrosion, chemical resistance, or atmospheric conditions that may require trade-off in the selection process.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Is the solar water heater automatically supplied by temperature?
Set for the timing of water is good, water temperature control, timing Sheung Shui is generally one of the 2 election, the control board can only perform a function, always dissatisfied with your sensor is not good, is not conducive to the protection of sensors
Q:The solar water heater how to remove rust
3, and then one by one to install a vacuum tube can be, should be carefully checked before the installation of water tanks at the sealing ring is intact, if there is damage to aging, should be replaced with a new sealing ring.Note: the water in the vacuum pipe is floating in the water, not like the thermos water paste in the water tank wall, so clean up relatively simple, but the demolition must be careful not to force fierce, to avoid damage to the vacuum tube.
Q:Solar water heater water pipe with plastic tube or PPR tube good
PPR tube low temperature tolerance. PPR has a cold brittleness (brittle point of -20 degrees C), in winter (5 degrees Celsius) when the construction of special care. Aluminum plastic pipe without cold brittleness (brittle point is -70 DEG C), can be easily installed below -20 C. Heat resistance of PPR pipe is lower than that of aluminum tube. PPR long-term use temperature of 70 degrees C (50 years, 1MPa), the maximum use temperature of 95 degrees C; long term use of aluminum plastic pipe temperature of 95 degrees C (, 1MPa), the maximum use temperature of 110 degrees C.
Q:How to identify the solar water heater is good or bad?
Insulation layer must be careful. The vacuum tube is pulled out, can be used in accordance with the insulation layer of polyurethane foam as a whole, if the hand by a soft feeling, then the foam, its short service life and easy to leak. If the hair is hard for polyurethane, with excellent thermal insulation performance.Depends on whether the stainless steel bracket genuine". Some water heaters say they are ultra-thin stainless steel stent, in fact, the texture is very poor, even galvanized support is not as strong. So be careful when choosing. At the same time it should be noted that, under normal circumstances, each person's water consumption is about 30-40 liters, consumers can choose according to the number of people in their own home to the corresponding capacity of the water heater.
Q:Two solar water heater is the connection method?
The best is installed in parallel to solve the problem better, the hot water in winter, the electric water heater is the ultimate solution to the solar hot water pipe series an electric water heater, what are solved by the solar heating tube to the auxiliary heating, not only a waste of electricity, but also the heat in the day on the surface of waste ah. And actually can not reach the effect of hot water.
Q:Solar water heater in the end do not use electricity
The utility model relates to a solar water heater, which is a device for converting solar energy into heat energy, which is used for heating water from low temperature to high temperature, so as to meet the requirement of hot water use in people's life and production. The solar water heater is divided into the vacuum tube solar water heater and the flat plate solar water heater according to the structure.
Q:Solar water heater power consumption?
The electricity is not very big. Unless the water is not hot. You use electricity to heat. The solar energy is plugged in to keep the equipment running
Q:Solar water heater to maintain it?
2, solar water heater in the use of the process should pay attention to what problems? Pay attention to water time. According to the weather conditions, determine the amount of water, to ensure that the appropriate bath temperature. Regularly check the water heater pipe, vent and other components are working properly. The air conditioning is serious or the sand is big, and the dry area is periodically flushed the vacuum tube.
Q:Solar water heater can be installed with pressure pump, how to add, how much? Easy to use?
Install pressure pump step:1, remove the intake pipe.2, the pressure on the end of the booster pump received water inlet pipe, one end of the water faucet
Q:Solar water heater water is not urgent
1, pay attention to water time.2, according to the weather conditions, determine the amount of water, to ensure that the appropriate temperature bath.3, regularly check the water heater pipes, exhaust holes and other components are working properly.4, the air pollution is serious or the sand is big, the dry area regular flushing vacuum tube.5, after the installation of water heaters, non professionals do not easily move, loading and unloading machine, so as not to damage the key components. How to determine whether the solar water heater full? General solar water heater with overflow pipe, according to whether the overflow pipe to determine the state of water, water can also be equipped with a water level control instrument, water full automatic alarm, according to the alarm identification.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range