SYPHONIC TWO PIECE TOILET
S-TRAP 300MM ROUGHING IN
a.We introduced oversea advanced production equipment, complete
with modern installations.We are devoted to setting up the top grade of
individualceramic sanitary wares, and created our brand and idiographic
b. Fast sample and delivery.
c. Best quality and competitive price.
d. Pay more attention to product design style.
e. To a certain scale and technology to expand the market.
- Q:What is the toilet and the squatting pan?
- Everyone has a merit, the toilet is more comfortable, but only suitable for home use, because it may cause bacteria and virus transmission; squatting pan, more health.
- Q:What is the meaning of the static in the toilet?
- In fact, the use of the siphon flush, first talk about the jet siphon flush: the flush is divided into two, all the way directly to the toilet wall, the other way from the independent pipeline through the pool below the hole directly , In order to increase the intensity of flushing, and produce siphon effect, the dirt discharged from the toilet
- Q:What is the reason why the toilet is always clean?
- Ceramic hanging:
Toilet ceramic glazed enough smooth, easy to hang up, it will cause red is not clean.
1, if there has been a similar situation, that is, product quality problems, glazed material is not good, so that business door processing.
2, before the red can be washed, and now the red is not clean, then look at the ground to clean, do not use too strong corrosive washing liquid, will damage the ceramic glazed, later easier to hang.
Ceramic hanging solution solution:
Under normal circumstances, with the toilet brush brush directly like. If it is always easy to hang, a good toilet ceramic glaze is better, with cheap toothpaste, pay attention to white, do not transparent the kind, and then use the dishes or green rough rough to scrub. If you have not cleaned up for too long, you can gently wipe with a steel ball. But with the steel ball and decontamination powder, etc., will be destroyed on the ceramic glaze, it is recommended not to use.
- Q:What is the good choice for Farnisha and Wrigley?
- Faenza is dressed in foreign skin of Chinese goods, the price is high outrageous ~ quality is generally like ~
On the quality, the overall use of feelings, a variety of performance to compare the Wrigley better, not only reasonable price, and durable. We have a lot of relatives and friends have chosen the brand, the most important thing is to support domestic products!
- Q:What is the difference between the toilet and the buffer?
- 4, the market price
Straight toilet prices are relatively cheap.
5, suitable for units
Siphon toilet "body" than "chunky", more suitable for larger bathroom area.
Straight toilet is relatively "thin", is the bathroom area is relatively valuable small apartment of choice.
- Q:What is the role of the toilet flanges
- The toilet is a kind of sealing ring, like the kind of butter that is installed in the toilet, installed in the bottom of the toilet outlet, play a sealed role in the toilet to prevent the sewage out of the sewage pipe, but also to prevent sewage Pipe smell up.
Flange (Flange), also known as flange flange or flange. The flanges are the interconnected parts between the pipe and the pipe, for the connection between the pipe ends; also used in the equipment on the import and export of the flange, for the connection between the two devices, such as reducer flange. Flange connection or flange joint, refers to the flange, gasket and bolts connected to each other as a combination of a group of sealed structure of the detachable connection. Pipeline flange refers to the pipe fittings in the pipeline with the flange, used in equipment refers to the equipment import and export flange. There are holes on the flange, the bolts make the two flanges tight. The flange is sealed with a gasket. Flange thread connection (thread connection) flange, welding flange and
Card holder flange.
- Q:What is the installation skill of the squatting device?
- Squatting pan to change the toilet
Practice: 1. Ground all planing, see the original squatting toilet drain [trap], removed to the connection with the riser at the three links, re-use UPVC tube pipe, you can add drainage and floor drain. The problem has two reasons: 1. The original squatting pan under the trap, the transformation should be used to buy squatting the kind of toilet [business know], or the toilet itself has a water trap , Two water trap, too much resistance, poor drainage. 2. If you have squatting the seat of the kind of toilet, poor drainage, should be connected to the tube of the cross tube is poor, the transformation should be clear and then installed. If you live on the floor, depending on the scene to determine the program: 1. The most thorough program, and downstairs consultation, plan out the toilet inside the ground [first class for the 20cm thick], remove the cast iron trap, with UPVC drainage pipe connected, Re-do the ground waterproof, closed water test after passing the decoration, the height is reduced, easy to use. 2. If the water pipe for the plastic tube or from the hug can remove the water trap, replaced by 90 ° elbow can not, do not damage the ground. I suggest you find a professional master to do, so as to avoid infinite trouble!
- Q:The toilet was removed after the re-installation, flushing, how to re-install it
- How to install the toilet
Toilet seat installed, in advance to draw a toilet seat template, because the toilet is now basically siphon, the following water outlet 10 cm below the ground of the water outlet is small, if it is straight, the following large outlet, fitted with flange to the ground A pressure, basically able to pressure in the middle, but if the sink is small, the workers with their own feeling down when the pressure is sometimes impossible to pressure in the middle, generally have to deviate, so easy to form a flange lax, Sometimes the flange ring will rise, will affect the toilet seat seal, if the seal is bound to leak, is also one of the main reasons for the toilet back taste. The key to the toilet is the seal must be installed, which is essential for the siphon toilet, sealed good siphon toilet, flushed after the formation of negative pressure, which will increase the momentum, washed more thoroughly, red There is a water when the water "嘬" down the feeling, if the seal is not good, not only will return flavor leakage, but also affect the flushing effect, and some will leak.
When the installation, the workers will not give you a particularly accurate to the amount of the outlet, if the toilet is just under pressure in the middle of the ground outlet, so that the flange evenly force, you must play on the ground cross line to find the center line, Also draw the template (1) of the toilet seat. My own toilet is installed, installed and installed before the use of a big difference, although I bought a four hundred dollars is very cheap toilet, but now flush particularly happy.
- Q:How to choose a toilet?
- Horizontal (wall row) and bottom row (lower row) does not refer to the way of water, refers to the drainage method.
To know which one is used in your home, you can look at the location and placement of the toilet in the bathroom. If the tube (about 11 cm in diameter) to be installed in the toilet seat is erected (the nozzle is parallel to the ground Like a tube erected), you can use the bottom row,
If it is horizontal (the mouth parallel to the wall, like a tube on the ground) is to use the horizontal.
- Q:What are the accessories for the toilet itself?
- Sitting cover, fixed screw, up tube, to buy pipe fittings (water valve, connecting with metal hose)
MAYFLOWER is a manufacturer of sanitary products including toilets, washbasins, bidets, mop tubs, squatting pans and wall urinals. Established in 1994, we are a large-scale manufacturer with factory and workshop facilities covering more than 30,000 square meters. Moreover, we utilize advanced imported production machinery and testing equipment in order to ensure high quality medium-to-high grade water saving sanitary ware.
1. Manufacturer Overview
|Annual Output Value
||Above US$100 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||50,000-100,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range
||High and/or Average