Hot Sale Epistar Super Bright Dimmable Led Par38 Light 18W E27 China Manufacturer
- Ref Price:
-
$8.00 - 13.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 50000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
Hot sale epistar super bright dimmable led par38 light 18W e27 china manufacturer
Specification
| Model No. | PAR-COB |
| Input Voltage | AC85-265V |
| Power | 18W±10% |
| Luminous Flux | 1600~1800LM (95~110lm/ W) |
| Beam Angle | 80°/38° |
| Lamp Base | E27 |
| Quantity of LED. | One COB |
| Chip of LED | Bridgelux/ Epistar |
| Life Span | ≥50,000 hrs |
| Body Material | Aluminum |
Feature
1. Different LED quality, voltage are available for choice;
2. Optical lens with excellent performance;
3. Available with socket - MR16, GU10, E17, E27 and E14;
4. Shockproof and moisture proof and anti-distortion;
5. Good colour rendering and low power consumption; led par light| led par light| led par light
6. Long lifespan: the light source used the high-brightness and high-performance import chips and its operating life is 50,000 hours; |led par light | led par light | led par light | led par light | led par light | led par light | led par li
7. High efficiency and energy-saving: energy saving 90% than the filament lamp and 60% than the energy saving lamp;
Application
Ideal for the replacement of traditional light.
1. Supermarkets, Hotels, Restaurants; Bank, Meeting Room, Exhibition Hall, Show Window,
2. Night Club, Disco Hall, Karaoke Room, Coffee House, etc.
Our Services
1. Your inquiry for our products will be replied in 24 hours.
2. Small quantity order is welcome.
3. OEM and ODM are welcome.
4. Make the products as your requirements.
5. Protection of your sales area, ideas of design and all your private information.
Delivery detail:
We ship goods by UPS/DHL/FEDEX/TNT or your requested express which takes 3~ 7 days to arrive, or by air cargo which takes about one week to arrive , or by sea which takes about one month to arrive , depending on your actual requirements.
- Q:Excuse me, If no ceiling can hold the LED lamp?
- Is two kinds of rail type with the shoot the light, you need to install a track, you will orbit is fixed at the top of the strong, and then track type lamp base card into orbit, electric rail, shoot the light will be bright
- Q:The difference between floodlight and LED to shoot the light
- Hello!!!!! Waterproof, omni can be waterproof, but it is difficult to do waterproof shoots the practicability, floodlight used outdoors, but shoot the lamp to be more used for indoor power size, floodlight can reach the maximum power of far distance is much bigger than that shoots the light projection, omni range than shoot the light
- Q:Clothing store 20 square meters need several track shoot the light, Ann is LED
- Clothing store installation track shoot the light, the light immediate illuminate is on show clothing, to highlight the subjective aesthetic effect, to create a unique environment, rich administrative levels, the colorful display effect. Can track shoot the lamp to a certain extent, the more the better, but the number of high temperature and limited installation, routine is orbital orbital slot on ceiling installation, shoot the spacing between 40 ~ 60 cm one, can increase or decrease according to actual condition, usually need more than prepared to shoot the light 10% ~ 20%.
- Q:A few questions about LED lights
- First, the power supply current exceeds the LED light source of the load current, lead to LED lamp bead light failure quickly, even destroyed. Solution: 1, to reduce the input current; 2, the LED light source for more than 45 mil 3 w light bead, so each lamp bead to withstand current of 700 ma, but this time is 9 w, must increase the radiator. Second, the high voltage is bound to burning lamp bead,, the only way to avoid lower voltage, series resistance. Third, voltage and current are beyond ratings, is sure to burn, not saved. Can only cut down the voltage and current are. Method is still the same, want to directly change the power supply, either in LED series resistance voltage drop flow in the circuit
- Q:The difference between led grille lamp and dared light
- Led grille lamp and dared light is the same kind of lamp, just name is different.
- Q:The LED lamp has been flashing, what is going wrong? Original drive 36 to 48 v, output voltage output in a new drive 40-80
- Blinking is caused by the stroboscopic, caused by voltage fluctuation. For many reasons, zero line switch fire wrong, drive and inadequate capacitance can cause stroboscopic.
- Q:18 w changed other power drive not bright LED lamp, what reason be?
- VF values of each lamp bead is about 3-3.4 V, so a series of at least 18 to 54 V, general situation, the output voltage won't do more than 50 V, because it is not safe (of course, the use of isolation was not drive), so will make it 2 and 9 series way for more than 27 V (voltage), but not see your driver clear this After a few short also cannot do 3 * 18 w, because your lights must be 1 w (300 ma), rather than a 3 w (600 ma), current headlight bead hold, within a few hours it broke
- Q:What is the input voltage of the mr16 led?
- LED light source on the luminous principle, energy-saving, environmental protection level are much better than traditional lighting lamps and lanterns. And LED the unidirectional formed to shoot the light with the perfect support search light
- Q:The house that new clothes builds, pick up a LED lamp Specific parameter no receive wire didn't receive zero after electrify LED lights have a dim light An estimated 10% of the after less than fully open after disconnect all electrical appliances There are light which out of the question to solve the trouble is online, etc. ~
- Didn't answer the zero line bright? The same way. I made a 4 watts of the led, power supply is finished product power supply, will dim light when the power is switch received a zero line on the (estimates). Should be to alternating current (ac) by the rectifier filter circuit of small discharge, cause of capacitor on the voltage circuit work. '
- Q:Drive power supply with a what kind of specification, can be in parallel two 3 wled shoot the light
- Upstairs to answer the wiring method in theory can be bright, but if one of the lamp is broken, because it is a constant current driver, another lamp will inherit the double current, quickly burn out. So the correct connection is the use of double current unchanged, power driver, serial connection.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Hot Sale Epistar Super Bright Dimmable Led Par38 Light 18W E27 China Manufacturer
- Ref Price:
-
$8.00 - 13.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 50000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
