Cheap Rgb 12V Led Strip Made Of 5630, 3528 Or 5050 Led Bead
- Loading Port:
- China Main Port
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 10000 Rolls Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
This is one of the most popular applications of LED light strips. It is very simple to install LED strip lights, as they can be cut every inch or so to fit your exact spacial requirements. There are two main variations of LED strip Flexible SMD or High Power 1W batons. Flexible LED Tape Flexible LED strip is usually supplied in 5M reels and basic dimensions.
Specifications
Item | Parameter |
Size | 5000*10*2.5mm (each roll) |
LED bead quantity | 60pcs/meter |
LED current | R20mA ,G20mA ,G20mA |
LED Color | colorful 7 |
tape length | 500mm or as buyer’s request |
Color temperature | 5500k~6400k-white,2750k~3250k-warm white 7250k~7750k-cool white |
LED Chip manufacturer | Cree/Epistar/Chinese brand or as buyer’s requests |
LED bead type | 3629,3528,3630,5050,3014 |
Strip Material and Processing type | 1. aluminum board SMD LED light bar 2. Soft PCB SMD strip, 3. Waterproof flexible soft SMD strip |
PCB width | |
LED illumination | 1600-2000Lux |
Technical requests
NO | Item | Units | Parameter range | ||
1 | working environment | °C | -25~60 | ||
2 | storage condition | °C | -25~60 | ||
3 | work frequency | Hz | -- | ||
4 | limited voltage | V | DC12±0.5V | ||
5 | Maximum current | A | 2A/Roll | ||
6 | Maximum output power | W | 72W/Roll | ||
7 | Grade of waterproof | IP65 | |||
Package
1x LED lamp spool
1x Anti-static bag
Installation
STEP 1: Familliarize yourself with LED Strips
STEP 2: Choose brightness and color of your strips
STEP 3: Calculate length of strips and power supply
Notice
Please read the specification first to make sure the using condition is fit.
Please shut off the switch before connect the product, then turn on.
Delivery
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By Air | 3-10 business days |
By Sea | 30-40 business days |
- Q:Ceiling LED lamp with controller output how many volts?
- There are high pressure, there are low pressure, there are 12V. The general controller will be marked above. A controller called Darius I bought in awesome Photoelectric Technology Co. Ltd. is the last time, 12V. They are specialized in producing LED display, LED lamps and LED lamp belts. Lighting engineering is also done. You can ask their technician.
- Q:Which is better, low voltage LED belt and high voltage LED lamp?
- The quality requirements of the specific application and it mainly depends on your personal, if it is used in the ceiling is relatively high, under normal circumstances can not directly contact the local, can choose high LED lamp belt, because of the high pressure lamp with the cheaper price.
- Q:LED lights belt, what mobile power, can not pull wires
- If the number of light bars is not large, the 12V lead battery + 220V inverter can be used to boost the 12V 220V and convert it into alternating current. If only a few meters long band, inverter can be replaced by DC - DC DC boost circuit board, and 12V power combination;
- Q:What is the wattage of the LED lamp with one meter?
- Each band must be equipped with a dedicated plug (plug with a transformer); when connected, be sure to remove the transparent plastic cover, and then try the lights and then cover. It must not be connected directly with a cover, so it is easy to short-circuit!
- Q:The brightness of 220V lights with LED power up before optical switch can adjust the lamp with the LED?
- The brightness of the LED light band cannot be adjusted.The high voltage light belt is made through IC or resistance capacitance step-down, and the security is very poor. Easy to cause fire and safety accidents, or use low voltage safety.
- Q:How do you fix the LED band when you step on the stone?
- First, put the lamp belt trough on the marble surface, then the LED lamp is then put into the lamp belt trough. This method is suitable for the occasion that needs LED lamp belt to be fixed to marble for a long time;
- Q:LED how to distinguish between good and bad?
- 1, look at solder joints. Regular LED lamp manufacturers with LED band produced by SMT patch process, with solder paste and reflow process produced. Therefore, the solder joint on the LED light belt is relatively smooth and the soldering capacity is not much, and the solder joint is in arc shapeThe FPC pad extends to the LED electrode. However, the solder joints of the LED lights in the Shanzhai version are not uniform, and most of them appear as a dot to weld the feet. At the same time, there are different degrees of tin tip, which is a typical phenomenon of manual welding2, look at the quality of FPC. FPC points of copper and rolled copper two kinds, copper plate copper is protruding out, look carefully, from the pad and FPC connection to see. The rolling copper is closely connected with FPC, and can be bent at any time without the phenomenon of pad falling off. If the copper plate is bent too much, the pad will fall off and the temperature will be too high to cause the pad to fall off.
- Q:LED lights with 12 volts a meter, how many W?
- Power calculation method for LED lamp band:Power is the measure of the transmission rate of energy. In a DC circuit, it is the product of the voltage V and the current A; it is much more complicated in the AC system. Whether they are high voltage or low voltage LED light belts, they convert AC to DC to work.
- Q:How about the wattage of the hidden LED lamp belt?
- Then you have to see what you choose. There is no standard, DC12V and AC220V are different.
- Q:Excuse me, what's the power consumption of the LED light belt?
- Different light belt power consumption is different, the length of the lamp belt is different, and the power consumption is different. The common power consumption per meter is 1--5W. Suppose you're using 5W, and with 10 meters, the total power consumption is 50W. If you use 2W, 10 meters is 20W.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Cheap Rgb 12V Led Strip Made Of 5630, 3528 Or 5050 Led Bead
- Loading Port:
- China Main Port
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 10000 Rolls Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords