5630 Smd Led,Smd 5630 Led,Smd 5630 Led Strip
- Ref Price:
-
$1.03 - 6.59
/ roll
- Loading Port:
- Shenzhen
- Payment Terms:
- T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 10000 Rolls Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
5630 smd led,smd 5630 led,smd 5630 led strip
Specifications
Light Color: White
LED Quantity : 5630 smd led ,60pcs/m
Input Voltage : DC12V
Operating Current : 10 A
Input Power : 120 W
Water Proof :IP20/IP66
Lumens :2000Lm/5 meter
Size: 5000mmX10mm
View Angle: 120° Gross weight
Illumination range 0.5-1.5 m
Storage Temperature -40°C----+80°COperating emperature -25°C----+60°C
Feature of 5630 led strip
1. Width: 10mm, 5m/rolll;
2. Viewing angle : 120 degrees;
3. Cuttable at 3 leds
4. Color available:single color.
5. Assembled with 300 pcs SAMSUNG 5630 smd led / 5 meter packing
6. Long life: 50,000 hours;
7. Board material: FPC;`
8. Input: DC 12V , 24watts per meter;
Applications of 5630 led strip
1) Indoor and outdoor decorative lighting and backlighting
2) Emergency hallway lighting
3) Auditorium walkway lighting
4) Outdoor illuminated signs and advertisements
Attention
1. Supply voltage of this product is 12v or 24v; never connect to other high voltage.
2. Never connect two wires directly in case of short circuit.
3.Lead wire should be connected correctly according to colors that connecting diagram offers.
Packaging & Delivery
Package:
1 x Box
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: LED lights with a meter, about how much W?
- Each manufacturer because the chip is not the same, will cause the LED lamp working voltage and current is not the same. Therefore, the same band of rice LED lights on the market, their power will vary.
- Q: LED lamp with frequency converter burn, what's the matter?
- In the inverter power supply, the inverter input special filter, or inverter input dedicated reactor to try.
- Q: Waterproof LED lamp belt used after a period of time, there is a part of the lamp with white into orange, what's the matter?
- General waterproof lights are used in epoxy waterproof, this glue easily oxidized low cost, most manufacturers are using this.There is also a silicone waterproof, this performance better, but the higher cost. Next time you buy, you can weigh and choose!The above answer, I hope to help you.
- Q: How about the wattage of the hidden LED lamp belt?
- Then you have to see what you choose. There is no standard, DC12V and AC220V are different.
- Q: 5050LED lights with 14.4W/1 meters, power 12V-360W can take 25 meters? I mean RGB, if it's connected to the color
- Reckon the power: 14.4*25 = 360W, see power and power on the surface is the same, this is actually a problem, make full power power, it's easy to burn, only half done, it is recommended to use two power.
- Q: How to install the LED lamp with the plug?
- Check that the lead of the light port is approximately flush with the port. The distortion of the LED light band may cause the lead of the lamp band to slide relative to the outer plastic part. If the port in the light inside the wire out port, direct plug lamp with plug is easy to cause a short circuit, causing burning lamp with plug even with lights, encounter this kind of situation you will grow a trim to wire port. Be careful. If you cut too much, this meter will be cut off, so you must watch the line cut on the back of the lamp. Don't cut into the inside of the lamp bulb and the lamp with any loop. Be sure to pay attention to the wiring inside the light belt. After you cut the plug, you can light the lamp belt.
- Q: LED current increases beyond 20MA, or when 30MA-50MA has consequences for LED lights?
- The high power LED does not matter, but the straw hat, like 5mm small LED lamp is fatal, usually these small LED rated current is 20mA, a do make it work on the 15--18ma, you need to 30MA-50MA, it is early light oh, quickly over the
- Q: How can I make sure it's the 2853led band?
- As long as you have seen 2835 beads with a glance down lights you see
- Q: How many meters can 150W power supply with LED light belt?
- That depends on what kind of LED lamp belt, such as 3528, 5050, to cite an example, 5050, a meter is about 14.4 watts, you 150W power, it will be 10 meters! I hope I understand
- Q: How do you charge for installing Led lights?
- For engineering projects, calculate the number of lights required. It should be noted that the band can be divided into three groups of shearing use, generally 60 per meter of light belt, each length of 50mm, 30 meters per band, each group length of 100mm. After you know this, you can calculate the actual number of lights used in accordance with the construction effect diagram. Generally reserve about one meter or so spare length, so as to avoid excessive procurement, resulting in waste of resources.
Send your message to us
5630 Smd Led,Smd 5630 Led,Smd 5630 Led Strip
- Ref Price:
-
$1.03 - 6.59
/ roll
- Loading Port:
- Shenzhen
- Payment Terms:
- T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 10000 Rolls Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
