Detailed Product Description
1.36x10W 4in1 Edison LEDs
3.LED Display and fan for cooling
4.CE&RoHs, 18 months warranty
LED Moving Head Light-36
1. Input voltage:AC 90V~260V/50~60Hz
3.LED:36pcs 10W Edison LEDs(R10/G8/B8/W10)
4.Control Mode: DMX-512 Control mode, auto-run and sound active
5.Pan: 540° 630° 16bit
6.Tilt: 460° 335°85hmm(1pcs/carton)
9. Channels details:
CH7 X / Y Speed
CH11 X-axis fine-tuning
CH12 Y-axis fine-tuning
1.36pcs high power LED EDISON high power LED chip
2. Low power consumption,super lumlnance,rich and splendid color.
3. The average service life of every LED reach 100000 hours.
4. DMX- 512 control signal , 12 standard channels.
5. Infinite RGBW color system.
6. It adopt the LCD display
8. With inner automatic run function ,master/slave setting very easy to operate by users.
- Q:What about "replacing the projector lights and cleaning the screen" on the screen?
- That means that the aging of the projection lamp, or the screen is too dirty and the effect is not good, automatic detection ah, you can clean it again and again, but it is best to find a professional master yo,
- Q:Who used the romantic four star projection lamp? 160
- The effect is probably in a room to turn off the lights, the room will be the star effect, each place advanced can adjust the universe, so even a map of the universe is a small computer, but not all, half of the Milky Way system almost, that is very expensive, and almost impossible to buy
- Q:Star projection lamp
- Star projection, you can search for this on the Internet, but
- Q:How do you make the projection light sound 20
- One switch is to control the main lights and music, and the other is Lantern and rotation, that is, no music, but also lighting effect, then only turn
- Q:What is the principle of advertising projection lamp?
- Advertising projection lamp, namely new advertising products of a high efficiency, are to appear in the advertisement in the field, the replacement of the advertising pattern only needs to change the pattern, the pattern is reflected to the wall, the ground through the principle similar to the projection reflex advertising. The basic principle is as follows: advertisement pattern piece, advertisement projection lamp, negative reflection, LED light source reflection.
- Q:What is the projection distance of an advertisement projector?
- Mainly related to environmental brightness because the light emitted by this projection lamp is definite, and there is no astigmatism and condensation problem. As long as you use the relative low brightness of the environment, you can clearly highlight the effect of projection lights!
- Q:Is the price of projection light expensive?
- The price of projection lamp is determined by various factors, such as projection power, projection distance, ambient brightness and so on, which are expensive and cheap
- Q:Projection lamp market is good?
- LOGO projection lights break through the creative advertising of people's habitual thinking. Arouse people's curiosity and make your propaganda achieve the best and the most beautiful publicity effectAny place where the projection of high-quality images, text, etc.,
- Q:LED how far is the new light source projecting from the projection bulb?
- Why LED, laser and xenon lamp at present it is difficult to shake the halogen lamp and UHEUHP lighting the main position? This also and its luminescence characteristics are not unrelated. Xenon lamp and halogen lamp in the car industry competition has shown a personality difference, although xenon lamp performance is good, but can be successfully transplanted to the projector light source, it is still hard to say, currently on the market using xenon lamp projector technology represented by SONY VW200, but its price is high level; laser technology was should be optimistic about whether brightness purity is "perfect", but today Microvision SHOW projector miss, let us begin to have a trace of worry, laser technology also temporarily stranded. As for the LED light source, it has become the most concerned technology at present. Whether it can break through its brightness bottleneck will be the key to whether it can become the mainstream. However, there is one point to note here, which is the color selection of light sources. At present, the projector light source is the basic source of white light, the color wheel or splitting technology to obtain a monochromatic light source is needed, 3LCD is the three chip and display RGB color image, the lens magnification before the image superimposed color effect; and the technique of DLP is used to color light, the color wheel is a few to be able to obtain the corresponding color number (except repeat). Now, laser and LED technology are expected to provide pure monochromatic light source directly, which will have a significant impact on the light path design of the projector, and even change the technical line and market pattern of DLP and 3LCD. The true monochromatic light source can give the projector technical promotion, how much for different projection technology, the light source technology is to close the technical gap of the two or to make it more distinctive, we wait and see.
- Q:What are the problems that should be noticed in installing the projection lamp wiring?
- Generally speaking, the installation of a projector does not mean that you can immediately begin to appreciate your favorite movie. In order to achieve better results, we must also adjust it. The first thing the computer resolution adjustment, the longest resolution is 1024 * 768, if you choose the projector in support of the 1024 * 768 resolution, basically do not need to adjust, but if you use to support a maximum resolution of 800 x 600, but the computer resolution is 1024 * 768 or even higher, in in this case the projector will automatically use the compression function to display the image, we can see the normal image, but the picture display quality is greatly reduced. Therefore, the resolution of the video source is set according to the resolution supported by the projector to match each other to obtain the best effect. Then the image projected onto the wall or curtain, a mobile projector to project an image into the correct position, and adjust the projector lens focusing knob on the line, while the image projection image to fill the entire screen. If the image is trapezoidal or parallelogram, then it can also be adjusted with the help of the built-in keystone correction function. Before using the technique 1. Before setting up the projector power, you need to confirm the normal connection of the projector cable and make sure that the video source has been properly output. After you complete the projection connection and turn on the projector, you also need to switch the output mode. Because there are three ways to output the projector, you can hold the Win logo key at the same time and press the F5 key (when you connect to the laptop, press the Fn key and the F8 key) to select the right screen output mode.
We are a professional enterprise integrating product design and manufacturing.
Our commitment with quality: we have been built detection system running through the whole process.Sales service:
1. Establish strong product show media and sales service network system.
2. Inherit professional careless service culture.
3. Build personality, under clients' order service platform.
4. Without any trouble on whole sales service.
5. Share "one step" style VIP service personality.
1. Manufacturer Overview
||Guangzhou, Guangdong, China (Mainland)
|Annual Output Value
||Above US$100 Million
||North America; South America; Eastern Europe; Southeast Asia; Africa; Oceania; Mid East; Eastern Asia; Western Europe; Central America; Northern Europe; Southern Europe; South Asia; Domestic Market
||Light engine CE certificate; Pool light CE certificate
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||81% - 90%
|No.of Employees in Trade Department
||1,000-3,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range
||Low and/or Average