Rubber Tube Fittings

Hot Products

0.4MPa dn20-1600 HDPE80 Water supply Pipe

PVC-U electrical insulation conduits and fitting in buildings

High Pressure Rubber Fuel Hose High Temperature 3 Steel Layer

0.4MPa/0.4MPa/0.6MPa/1.0MPa PE pipe for gas pipe

dn110-1200mm PVC-UH sewage, drainage pvc-uh pipe

Standard:GB/T5836.1-2006 PVC-U drainage and sewage pipe in buildings

Garden Water Rubber Hose Good Quality 5''

Rubber Silicone Hose Colorable Blue

Rubber Air Hose Flexiable Made of EPDM High Pressure

PVC-U or UPVC low pressure water irrigation pipe

FAQ

The difference between silicone tube and rubber tube

First of all, we can find the difference between the material of silicone rubber tube and rubber tube. Smell it with your nose. Silicone doesn't taste. Rubber has a flavor. Silicone is generally more flexible, and rubber is more mechanical.Silica gel tube has high and low temperature (-60 ~ 200 DEG C), environmental protection, non-toxic, excellent heat aging, ozone aging resistance, light aging and aging resistance, soft, arc resistance, corona resistance.

Between the two flanges in the middle of the rubber pipe, what is the name of the connection?

Rubber flexible joint is also called rubber flexible joint, flexible rubber joint, flexible rubber joint, rubber shock absorber and so on.

Rubber tube in the production process need to wrap cloth, in order to finalize the design, I want to know what cloth is winding cloth, what is the specification, please god!

Rubber pipes need to be wrapped in fabric during production so that they can be easily formed. I want to know that the winding fabric is commonly called water cloth". Specifications can generally be winding as required!

Laboratory condensate water pipe must use rubber tube, shall not use latex tube reasons

Low temperature bending test at low temperature: hose clamp on rigid torsion wheel diameter hose diameter 12 times, for 6 hours at a low temperature, twisted 180 degrees within 12s when the measured torque and the standard temperature measured torque ratio. Low temperature bending: hose clamped in the diameter of the hose within 12 times the torsion wheel, parked at low temperatures for 24 hours, in the 10s to reverse 180 degrees, check whether or not the internal and external plastic brittle fracture and damage.

What is the difference between the precast beam of the bridge and the method of pulling out the rubber tube after pouring the concrete? What's the difference between design and calculation?

Corrugated pipe is included in the design of the amount of engineering, the role is: reserved strand space. Its length is calculated when the work length of the steel strand.

What is the difference between plastic lined steel pipe and rubber lined steel pipe?

Common ground1. the same matrix: carbon steel tube2., similar structure: are lined pipe, steel, rubber (plastic) composite3., corrosion resistance is close to: in most acid and alkali medium environment, can work properly

Toilet hose and water tank joints leaking, how to repair?

Remove the joint, wrap the tape, and press again

What's the difference between the rubber hose joint and the stainless steel hose joint?

1, high water use of this product, the pipeline must be fixed or fixed support bracket, otherwise the product should install anti pull off device. The force of fixed support or bracket must be greater than the axial force, or should install anti pull off device. And because the metal hose pressure resistance better, do not need to install.2, you can choose to use according to their working pressure: 0.25MPa, 0.6MPa, 1.0MPa pipe, 1.6MPa, 2.5MPa, 4.0MPa of the flexible rubber joint, high pressure pipeline equipment, we recommend that customers choose chungha brand stainless steel metal hose, according to the different use of the environment and the size, our biggest can withstand up to 300KG, customers can also ease of use.