Q:General composite wood floor life

Home 10N maintenance of the better long, soak the words of 10 days to finish

Q:What is the meaning of strengthening the wear speed of composite flooring?

Wear resistance directly affects the service life of the product. Wear-resistant speed is the way that the degree of wear, generally said that the number of revolutions, the higher the number of wear-resistant, the better the wear resistance of the product. In accordance with national standards, with 180 mesh sandpaper on the three samples tested, each 500 conversion sandpaper one, in the A, B, C, D four quadrants, there are three quadrants appear clearly visible wear when the number of revolutions for the initial wear value (IP value). (FP) and average (AT), FP is often larger than IP 2000-3000 rpm, and AP value is IP and FP (FP) and average value (AT) average value. General test results in the AP value of 6000 rpm or more for the home use of homes, AP value of 9000 or more suitable for public use.

Q:How to polish the floor

Floor care essential oil, the more rub the more bright

Q:How to identify the quality of composite flooring?

First, the color of paper, look at the surface of the color is naturally not really second, wear-resistant layer, to see the surface of the wear resistance, the state to achieve more than 4500 turn can be used in the family, the general manufacturers have reached more than 6000 rpm Third, the environmental protection level traces of Cao Ke 丨 long check Hsue magic, is the release of formaldehyde

Q:Hello,We had an engineered oak floor installed in our home two weeks ago. The floor was glued down over the cement slab. What we have noticed is (1) there are a lot of gaps between the slats (some as big as 1.5 mm); and (2) there is one area where the glue did not stick and now the wood is lifting. This area is in the middle of the entry hallway and we hear a hollow sound when walking on this place (it can be pushed down by hand). My question is are these normal or do we need to contact the installer/dealer to have something done or complain? Thanks in advance for your advice.Jim

I think the floor was improperly installed,if they didn't leave a 1/4 to a 1/2 inch expansion joint around the edges your floor is buckling.

Q:The slab can vary in depth from -1inch to 0inch over a 10 foot range.we tried self leveling concrete. some parts of our initial pour,when we just learning did not turn out so well. now there are small areas that are as much as +.75inches.Can we shave/grind the high spots down. Do you recommend that we grind these spots down before installing the flooring?

I do highly reccomend doing a job right. If you want a good job, either do a level set or rent a grinder and level the floor.

Q:How does the composite floor be polished?

The composite flooring does not need to be polished.

Q:New house, composite floor scratches have been very obvious, all fine lines, is the floor of the problem? More

it's common. With the paint a reason. No matter how good the car, bought to wash twice must have fine lines. Depends on the light. The normal use of traces do not have to consider the Ji ridicule careers kill nine ghosts in the end of the end. Not everything is as hard as a diamond.

Q:Why is it better to use solid wood flooring?

Why is it better to use solid wood flooring?

Q:Our home was originally installed in the composite floor, about 40 dollars that kind, has spent five years. Now the living room and a bedroom floor is not good, and some of the floor between the sewing a lot, and some of the floor muster deformation. I would like to put the living room and bedroom to fight, that is, the living room to remove the floor to the original floor of the bedroom was not bad. Is this ok? Shop out of the effect is not particularly bad, but also can not use 4, 5 years? More

Yes, as long as the composite floor, whether it is reinforced composite or solid wood composite, are able to remove the other areas of the shop. How much time, smooth pull pull both the United States to help open the bubble or depends on how you maintain it, do not often use the wet mop mopping the floor [Bell floor, home dream starting point]