Q:The washbasin is not on the marble and is glued to the marble. Is the upper edge of the washbasin and the marble along the edge of the sticky

It is best to use glass glue 1, a wide range of bonding, for most of the building materials such as glass, aluminum, oil-free wood, etc. with excellent adhesion. 2, can be used for bonding ceramic sanitary ware, marble and so on. 3, a lot of varieties of glass glue on the market, there are acidic glass glue, neutral weathering adhesive, silicate neutral structural adhesive, silicone stone glue, neutral anti-mildew, hollow glass glue, aluminum plastic plate special plastic, aquarium Special plastic, large glass special plastic, bathroom mold special glue, acid structure, and so on

Q:accidentally dropped hexene in to the wash basin in the science lab..what can i do.there is a strong smell .

Wash it out with acetone (nail polish remover is primarily acetone)

Q:What is the washbasin in my washbasin essay

In the face of the wash, I put the washbasin in the pool, unscrew the faucet, "crash" water straight wash basin. Then I saw some white spots in the water, so I put the water into the kettle and re-access the water, this time, I put the filter on, and began to pick up water, this time there is no white little. After the water was finished, I put my towel slowly into the water. With two hands, press the towel slowly into the water. With two hands a press, on a white clouds fall into the water. I took the towel again and overlapped it. A hand holding a left and a circle and then hit a circle, the towel to face a touch on the finished. It seems that the face is not a simple thing ah! Do not take time to wash your face!

Q:Bathroom washbasin dirty how to clean the washbasin clean little coup

Very simple, clean detergent smear again, wait for a moment, erase, it is best to use a relatively rough cloth

Q:My bathroom washbasin, below the leak and the picture on the same, I do not care so gently press! The results of the things that off the above, and the following seems to be connected with the tube, the results of the tube can not get up, how to repair this thing ah? There is no guidance under the Supreme? So confused ah, sent 50 points, the success of the 50! The Add it, ah, I just looked at the water above the iron that I press off, inside the iron have been rotten, and there is a tube, the pipe above the link seems to link to the above that Iron, but I can not get enough to it, ah, next to the porcelain basin has been sealed, and I can not get ah! The The What should I do?

Second, if it is the column pot situation, should be removed from the basin, with a wallpaper knife cut off the wall of the plastic, remove the basin after the flap with the female screw removed, watch remember the pad Up and down there, according to the original order will be installed on the new flap. And then glue the glue re-fixed. Third, if it is on stage pots, then this is easy, the basin does not have to remove, in the lower cabinet can operate the above process. If the basin is not a cabinet, is the case of closure, it must be removed part of the lower seal, and the basin is not possible. There is no other way. This live is very simple, no need to ask the plumber, their own look can be. Note: need tools: a pipe pliers, a wallpaper knife. If it is to live pots, need to have a one meter long fine steel wire, cut basin by the wall that part of the glue.

Q:Washing basin on the edge of glass glue black how to do

It is caused by moldy, it is recommended to remove the buy 25 to 40 yuan of glass glue grinding, the basic cure.

Q:I've been using this combination of products to do a quick wash of my bathroom sink before shaving, because I don't want heavy duty cleaning product chemical residue getting in the water after I fill the sink I fill the sink with hot water to use for shaving. The mixture is;antibacterial soap (two squirts) and hand sanitizer (1 full squirt) on a sponge that is used for only for this purpose. I wipe the mixture over everything (sink, handles faucet, outer basin, etc), leave it for 5 mins and then wipe clean with hot water and a sponge (the same sponge rinsed free of soap)Is this sufficiently sterilizing my bathroom sink?(Note: the sink being addressed is my own private bathroom sink - common area bathroom is sterilized with ajax/comet cleaner and bleach followed by being sprayed down with disinfectant after primary rinse and wipe down)

Yes. That should sterilize it.

Q:The head of the water can not be unscrewed, clean up!

3. Cotton towel made of recommended piston Witnessed a worker is to use this earth side. First borrowed a hammer, and then by a towel, towel wet after winding in the hammer handle made of a simple piston. Then the blocked pipe straight About 10cm away from the mouth, the hammer as a handle, with the piston to clear. Although the effect is slower than the high-pressure air gun, but the general family may have these tools, temporary solution or can 4, first to see their own, but should pay attention to PVC or cast iron. The stall to buy a 2 m pipe dredge, in the head 2 cm for some bending, while the water, in the outlet into the dredge, while moving into the edge of the swing into the side, and then into the mouth of the dredger The future should be every other week to clear the time, if the professionals come, you can first use the artificial method, do not pour, you can also surrounded the pool to prevent water splashing. Of course, other things have to let go, and you have to ensure that a short time to clear, or a lot of smell

Q:Bathroom electric water heater and wash basin hot water sharing it "distance of 2 meters

Can, in the water heater outlet connected to a three-way tube on the line, that the hardware store has. As for the pipeline you can design according to the situation.

Q:what specifically will happen if i try to machine wash them? I can never get washing by hand to work correctly, so I'm trying to see if machine washing is a viable alternative.

Use cold water and the gentlest cycle your machine has. (Mine actually has a hand wash cycle.) Don't dry them in the dryer, hang them to dry which will take up to 24 hours depending on the warmth of your home and the dryness of it.