USB to Lan Adaptor/USB To RJ45 Converter

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT or LC
Min Order Qty:
100 Pieces pc
Supply Capability:
1000 Pieces per Day pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Detailed Product Description

Connect directly to a network through your USB port.

10Mbps or 100Mbps network automatically

Transfer speed: 480MBps

USB Bus-

This USB 2.0 to Fast LAN Ethernet adapter (Converter) allows you to connect your PC to an Ethernet Network (LAN) without requiring a normal Ethernet card. This Adaptor eliminates the need to open your computer cover to plug a network card into an expansion slot Ideal for computers which do not have Ethernet ports as standard. The device is fully compliant with USB 1.1, 1.1 and 2.0 specifications and supports full and half duplex 10 / 100 modes. The adapter supports both 10 Mbps and 100 Mbps Ethernet function based on IEEE802.3/IEEE802.3u LAN standard. This USB 2.0 to 10/100Mbps Fast Ethernet Adaptor for desktop and notebook PCs based on USB 2.0, the Adaptor extends the transfer speed of earlier USB Fast Ethernet Adaptors to true 10/100Mbps connectivity. The USB port of the Adaptor gives you throughput of up to 480Mbps to your computer. That is about 40 times faster than USB 1.1, the earlier USB specification. Connect directly to a network through your USB port. 10Mbps or 100Mbps network automatically Transfer speed: 480MBps USB Bus-powered. Complies with USB Specifications 2.0 and 1

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:My family only raised a sunflower, and there was no planting around it. Now the disk is big. How can we finish the pollination? Can pollination bear fruit?
Sunflower is a crop of cross pollination, self pollination rate is extremely low, artificial pollination can improve the seed setting rate, yield increased significantly.(1) the time of pollination in sunflower in the blooming stage (full field 70% 2~3 days after flowering), first artificial pollination, 1 times every 3 days after pollination, pollination is the best pollination time was 2~3 times, after the morning dew fell down to the end of 11. If the morning is not over, you can do it later than 15.(2) there are two kinds of artificial pollination methods. A puff of pollination. With one hand holding the sunflower disc neck, with the other hand puff (pollination tool made of soft cloth and cotton) positive touch disk, the sticky pollen grains in the puff, contact do not force too much, so as not to damage the stigma. Then use the same method to puff lightly touching another disk, in order to wipe down. Because the sunflower flowering is from the outside to the inside, to make fresh pollen pollination in the flowering flowers, the more number of such pollination, the pollen grains of mixed sticky puff more, choose more opportunities for pollination, pollination effect is better. The two is disc contact pollination, that is, in the adjacent two rows, during the flowering period, the disc is pressed against each other by hand by hand, which acts as a pollination. Use this method to make it light, so as not to strain and break the disc neck.
Q:How are grapes grown in a disk?
Potted grapesPotted grapes are the generic name for grapes grown in containers. Any vessel that uses containers such as pots, boxes, barrels, and planters can be referred to as pot grapes. Grape pot early results, such as the cultivation and management of well, two years can result, every grape fruit 1 3kg, more than 4 5kg.
Q:The disc of sunflower towards the sun reflects what features of life
The disc of sunflower towards the sun reflects to respond to stimuli, biological characteristics
Q:At the sunrise and sunset, are the sunflower discs facing?
With the sun spinning, morning, East, afternoon, West
Q:Urn breeze sunflower plate powder is national medicine or health care products?
Jingdong: the Jingdong price is the selling price of the goods, which is the basis for you to decide whether to buy the goods or not.Marking price: commodity display underline price for the reference price, the price may be the brand shop price, price tag or goods provided by the supplier of the genuine brand retail price (such as MSRP, MSRP etc.) or the goods have been shown in the Jingdong platform sales price; due to difference of area and time and the market fluctuation, inconsistent price, commodity price tag brand counters may show with you when shopping, the price is only for your reference.Discount: if no special instructions, discount refers to the sellers in the price, or crossed prices (such as price, commodity price tag brand counters, MSRP, MSRP) a price calculated based on the discount rate or discount amount; if you have any questions, you can consult before buying contact seller.Exception: merchandise promotion information to merchandise
Q:Why does the sunflower's disk move in the direction of the sun?
Brightness.The common sense of plant is tropism, tropism, orientation, water, contact, tropism and so on.
Q:Is the sunflower disk a inflorescence?
Should be。 Sunflowers should belong to the head in an indeterminate inflorescence.Here the first step is to define clear inflorescence flowers regularly in the peduncle the arrangement is called. Change the shape of inflorescence is complicated, the length of the spindle, branched or unbranched, each flower has no stem, the flowers open order, and other special factors etc.. Inflorescences are mainly grouped into 2 major groups: indeterminate inflorescence and finite inflorescence.Indeterminate inflorescence: characterized by the main axis of the inflorescence, which can continue to grow during anthesis and elongate upwards, producing bracts and flower buds, which are like single axis branches, so also called a single axis inflorescence. The flower opening sequence is rachides at the base of the flower blooms first, and then to the top in order to promote the orderly opening, if the rachis shortened, the flowers crowded into a plane or a sphere, the flowering order is the first starting from the edge to the middle, in turn open. The infinite inflorescence is divided into:Raceme: the inflorescence of wisteria, mustard, or rapeSpikes: grasses, sedge, etcThe inflorescence of a willowCorymb: hawthorn, pear, apple, cherry and so onCapitulum: chrysanthemum, dandelion, sunflower and so on.Fig syconium of Ficus pumila, etc.Spike: corn.Inflorescence cymose: also known as finite class features and indefinite inflorescence inflorescence, on the contrary, the top or the axis center of the flower to open, the main growth is restricted, the lateral axis can continue to grow, the lateral axis is the top first open flower, flowering order is from top to bottom or from the inside out. Classifications of finite inflorescences: single branched umbel, two branched umbel, many branched umbel. Here is no longer introduced.
Q:The pedals and the disc gears on the middle axle of the bicycle are wheels
In fact, the lever principle, labor-saving, because the increase of the axis of the moment.
Q:Where are the tolerances for jigs and surfaces?
Precision machining precision fixture usually needs to be higher than that of machined parts for vehicles, drilling, milling, machining center fixture on the coaxality, verticality and parallelism, position accuracy, flatness, straightness tolerances, or higher requirements, these tolerances must be combined with requirements of machining parts drawing technology also need to check form and position tolerances, meet the machining accuracy requirements that meet the quality requirements for the purpose of processing at the same time, pay attention to the processing cost, because of the higher accuracy, processing costs increase relatively, so in the design, according to the actual circumstances!Note: 1) the value of the shape tolerance usually given on the same element should be less than the location tolerance;2) when the actual elements comply with the inclusion principle, the shape tolerance should be less than the size tolerance, and the ratio is about 25%-63%.In short, in order to scientifically and reasonably label the geometric tolerance, it is necessary to systematically study the book of tolerance, coordination and technical measurement!The above point of view is for reference only, and the specific form and tolerance requirements should be determined according to the actual situation!
Q:Mountain front disc with small angular sway
It may be the middle axle bend (if you push very hard, the middle axle will probably bend)! The crank also wants to see if it hasn't been tightened (this is important)! Not really. Just look elsewhere for the car repair!I have told you the same boss ~ profiteers quick to change!
Our main products include all cables: LAN cables,patch cable,faceplate, keystone,patch panel, cabinet, fiber optical cable, fiber optical adaptor, FO patch panel, ODF, and cable assembly as USB cables, HDMI cables, VGA cables, power cables, AV cables, computer cables and OEM cables. Our markets spread all over Europe, America, Southeast Asia and the Middle East. We endeavor to develop new products at a high speed to meet your needs, and also provide the solution for design the project.

1. Manufacturer Overview

Location Guangdong, China
Year Established 2008
Annual Output Value US$1 Million - US$2.5 Million
Main Markets Eastern Europe
Southeast Asia
Eastern Asia
Western Europe
Northern Europe
South Asia
Company Certifications ISO 9001:2000 ;ISO 14001:2004;CE and ROHS

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Guanzhou,Shenzhen
Export Percentage 81% - 90%
No.of Employees in Trade Department 21-50 People
Language Spoken: English, Chinese
b)Factory Information  
Factory Size: 1,000-3,000 square meters
No. of Production Lines 8
Contract Manufacturing OEM Service Offered Design Service Offered
Product Price Range High and/or Average