SHENDIAO CONSTRUCTION HOISTS SCD200/200BP

Ref Price:
Loading Port:
Dalian
Payment Terms:
TT OR LC
Min Order Qty:
1 set
Supply Capability:
10 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 Variable frequency hoisting :
• permanent adaptation and optimizationof speed depending on the lifted load,
• very low slow speeds, smooth speed changes,
• high productivity.

Trolleying with variablefrequency, progressive speed by means of stepless control

The masts adopt the standard bases from the MC range, allowing it to be adjusted to the desired height.
The adjustable bases are of the same type as those of the MC crane range, providing a choice of method of installation:
• on fixing angles,
• on cross-shaped base,
• on travelling gear,
• or as a climbing crane.

Fitted with jib lengths ranging from 55 to 65 m, the MDT Topless cranes boast hoisting capacities of 6 to 10 t.
Providing a suitable size for all your needs.
They allow complex multi-crane installations by considerablyreducing the height gaps and interference of cranes on work sites.
The assembly, erection, transport and even maintenance times are reduced, and as a result this helps to keep operating costs low.
Optimum productivity and greater safety make MDT Topless cranes the best alternative for all users or hirers.

Elegance and distinction
Their new shape is easy to distinguish from a distance.
The counter-jib projects a dynamic and refined design and the profiled jib, with a regular inclination, shows a fluid and
elegant line.

Minimized, compact and light package
Transport and erection
The shapes, dimensions and weights of the components were devised right from the design stage to scale-down the
package and save time. Only a single, small, mobile crane is required to hoist the packages and assemble them.

Assembly of the
counter-jib on the
ground
The compact counter-jib has a reduced footprint, ballast supports and
stabilizer plates designed to be folded
away for transport.
The nose and stabilizer plates can be
simply unfolded which releases the
guardrails.
Assembly of the jib on the ground
Operation of crane fleets can be optimized thanks to the possibility of exchanging certain components of the crane jib with other models from the same range

Counter-jib ballast blocks with inclined bases are used for simpler dismantling on the ground, since they can be laid down easily.
No locking mechanisms are necessary, and the counter-jib can be unfolded easily.

Pinning is quick and simple thanks to the centering pins of the splice.

 Variable frequency hoisting :
• permanent adaptation and optimizationof speed depending on the lifted load,
• very low slow speeds, smooth speed changes,
• high productivity.

 Variable frequency hoisting :
• permanent adaptation and optimizationof speed depending on the lifted load,
• very low slow speeds, smooth speed changes,
• high productivity.

Trolleying with variablefrequency, progressive speed by means of stepless control

The masts adopt the standard bases from the MC range, allowing it to be adjusted to the desired height.
The adjustable bases are of the same type as those of the MC crane range, providing a choice of method of installation:
• on fixing angles,
• on cross-shaped base,
• on travelling gear,
• or as a climbing crane.

 Variable frequency hoisting :
• permanent adaptation and optimizationof speed depending on the lifted load,
• very low slow speeds, smooth speed changes,
• high productivity.

Trolleying with variablefrequency, progressive speed by means of stepless control

The masts adopt the standard bases from the MC range, allowing it to be adjusted to the desired height.
The adjustable bases are of the same type as those of the MC crane range, providing a choice of method of installation:
• on fixing angles,
• on cross-shaped base,
• on travelling gear,
• or as a climbing crane.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What does the lifting mechanism mean in a tower crane?
Magnification, in simple terms, refers to several ropes through the hookIf it is one in and out of two wire rope, that is two magnificationSimilarly, two into two out is four magnification
Q:Tower crane 4 how to change the rate of 2 magnification, how to change, say detailed points
There is a magnification pin on the hook group. When the magnification pin is removed, the pulley will automatically slide to the lifting trolley. At this point, the rope will be turned into 2 fold!Some manufacturers produce pulley, also need to be in the car, and then the magnification pulley with pin shaft fixed in the car!
Q:What is an attached tower crane?
Attached tower crane is due to the height of the building is relatively high, a steel connection in order to strengthen the stability of tower crane between tower crane and tower crane building, this form is called the attached tower crane.
Q:Do self lifting tower cranes allow a small swing of the boom in jacking operation?
The upper working structure of the attached tower crane is connected with the jacking sleeve frame, and a jack jack is mounted on the top lifting jacket frame. The upper crossbeam of the jack is connected with the jacking frame, and the lower cross beam is provided with a movable claw, and the lower supporting point can fall on the step of the standard section of the tower body. During lifting, first trim jib and balance arm, unlock the top are connected with a lifting sleeve frame with the standard section, start lifting system, lifting jack will superstructure.
Q:When building tall buildings, where is the bottom of the tower crane installed?
A firm foundation is built before the tower crane is used, and then the crane is fixed to the foundation
Q:The earthing resistance of tower crane shall not be greater than that of the tower crane
The lightning resistance of tower crane (tower crane) on the construction site shall be no more than 4 ohms.I. tower crane GB/T 5031--20085.5.5.9 lightning protectionIn order to avoid lightning stroke, the main structure of the tower crane, the motor frame and all the electrical equipment metal shell, wire metal protection tube should be reliable grounding, and its grounding resistance should be no more than 4 ohms. When multiple repetitive earthing is adopted, the grounding resistance shall be no more than 10 ohms.Two. Safety regulations for tower cranes GB 5144 - 20068.1.3 tower crane metal structure, track, all electrical equipment metal shell, metal line pipe, safety lighting transformer, low voltage side should be reliable grounding, grounding resistance is not more than 4 ohms. Repeated earthing resistance is not greater than l0. The selection and installation of the earthing device shall comply with the relevant requirements of the electrical safety.The insulation resistance of the 8.1.7 main circuit and control circuit shall not be less than 0.5M ohm.
Q:Is it difficult to test tower cranes?
See the ability of individuals, the first ticket 650 yuan graduation card ID card (copy) medical certificate according to 3 inch 3 days learning theory exam two days of practice examination through 15 days notice thank you hope to adopt licensing
Q:How many tons of tower crane QTZ80A lifting?
QTZ80A 80 refers to the lifting torque of 80 tons after lifting meters.
Q:What are the necessary safety devices on a tower crane?
(6) lightning protection and anti electromagnetic wave induction device;For the crane whose hinge height is over 50m, the lightning arrester shall be installed according to the actual situation and the electromagnetic interference shall be taken.(7) tower crane shall install limit torque coupling in order to prevent slewing overload(8) anti stripping device prevents the rope from working position(9) the device prevents the rope from breaking and the trolley is free to slide(10) the car prevents the broken axle device, prevents the trolley wheel to fall off the axle, then falls(11) each part of the brake is a working device and a safety device
Q:How to change the mechanical property unit of crane (tower crane)?
Measures for the record and registration of construction hoisting machineryArticle 1 These measures are formulated in accordance with the provisions on the supervision and administration of the safety of construction cranes' machinery (Order No. 166th of the Ministry of construction) in order to strengthen the management of the record and registration of construction cranes.The construction and registration of the hoisting machinery as mentioned in the present Measures shall include the registration of the lifting machinery, the installation (disassembly), the notification and the use of the registration of the second.Third construction departments of the people's governments at or above the county level may use the computer information management system to handle the registration and registration of construction hoisting machinery, and establish a database.The construction administrative department of the local people's government at or above the county level shall provide the registration and registration and inquiry service of the building hoisting machinery within its administrative area.Article fourth rental, installation and use of units shall be submitted in accordance with the provisions of the lifting of construction machinery registration information, and the authenticity of the information provided by the responsible.The construction administrative department of the local people's government at or above the county level shall establish a system for the examination and registration of the hoisting machinery.Fifth construction machinery rental units or purchase building lifting units (hereinafter referred to as the "property units") in the construction machinery rental for the first time or before the installation, should be registered at the competent construction Department of the local people's governments at or above the county level to the unit of business (hereinafter referred to as the "equipment registration authority") for the record.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range