PVC Tubes UPVC Drainage Pipes Hot Sale with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:I need to find a round, plastic jar that is 4 1/2 inches in diameter and 4 3/4 high. Does anyone know where I can find something like this?
- I'd bring a tape rule to your local grocery store.
- Q:What is the maximum temperature plastic tubes can withstand without deformation?
- The maximum temperature that plastic tubes can withstand without deformation varies depending on the type of plastic used. Generally, common plastics like PVC (polyvinyl chloride) can withstand temperatures up to 140°F (60°C) without deforming, while more heat-resistant plastics like PTFE (polytetrafluoroethylene) can withstand temperatures up to 500°F (260°C) without deformation. However, it is important to check the specifications of the specific type of plastic tube being used to determine its maximum temperature tolerance.
- Q:I have a stainless steel side-by-side fridge. It is a Frigidaire that is less than a year old. Yesterday, the water dispenser started leaking water from other orifices in the plastic around where it is supposed to come out when you push the lever to release water.I think it means that the tubing has come loose inside, and so spills out because it doesn't have a water-tight seal anymore.
- there is almost always a screw located behind the water bar that you can remove the push levers than you will see the other screw to remove the plastic front cover the problem is usually more than tubing pulling off it is more likely a broken part however you can get almost any part from frigidaire ?? less than a year isnt it under warrantee?? dont try to open it if it is that can void your warrantee
- Q:where can i get a print out of all the clored tubes and what test is used for each tube for a phlebotomists ?
- Blood collection tubes must be drawn in a specific order to avoid cross-contamination of additives between tubes. The recommended order of draw for plastic vacutainer tubes is: First - blood culture bottle or tube (yellow or yellow-black top) Second - coagulation tube (light blue top). If just a routine coagulation assay is the only test ordered, then a single light blue top tube may be drawn. If there is a concern regarding contamination by tissue fluids or thromboplastins, then one may draw a non-additive tube first, and then the light blue top tube. Third - non-additive tube (red top) Last draw - additive tubes in this order: SST (red-gray or gold top). Contains a gel separator and clot activator. Sodium heparin (dark green top) PST (light green top). Contains lithium heparin anticoagulant and a gel separator. EDTA (lavender top) ACDA or ACDB (pale yellow top). Contains acid citrate dextrose. Oxalate/fluoride (light gray top)
- Q:What are the high temperature resistant plastic pipes?
- Resistant to temperatures above 150 degrees. May choose:Nylon pipe, shortcomings, certain resistance, no..The price of the PEEK pipe is too high. It's sky highPOLYMSJ tube is the middle material of nylon and PEEK pipe. It is low price, super solvent resistant and suitable for chemical pipe.Low price.4.PI tube price high, the key is generally difficult to purchase.
- Q:How do plastic tubes compare to silicone tubes in terms of flexibility?
- Silicone tubes are generally more flexible than plastic tubes.
- Q:I would like to give all the girls in my daughter's dance company single stemmed roses after they compete in an upcoming dance competition. I tried last year just keeping the flowers in the car in water but that didn't work very well. Plus it was a hassle getting them from the car since I had my daughter's costumes, make up, etc and other props. I would like to this year use those individual water tubes that usually come on single stemmed flowers but I'm not finding them. I am buying for about 30 girls so I need to keep this as affordable as possible. Any ideas on how to create a homemade version or buy them for cheap? I will call a florist but I'm anticipating them not selling to me because they would want me to buy the roses from them (I am just buying about 2 1/2 dozen and doing it myself.Thanks so much!
- You might try using plastic tubing and plugging the ends. Glass tubing is another way to go, more durable but also more expensive more work. Glass tubing can be cut to length then closed off on one end by heating in a flame until it pulls together. Large drinking straws could work as well, you could seal the bottoms with an iron by placing the straw between aluminum foil sheets.
- Q:Can plastic tubes be used for playground equipment?
- Yes, plastic tubes can be used for playground equipment. They are commonly used for slides, tunnels, and climbing structures due to their durability, versatility, and ability to withstand outdoor conditions.
- Q:So, I went to the dentist today to get my teeth checked out. The oral surgeon said I need two teeth pulled out, but I need to be knocked out cuz it's so bad. He said the way he's gonna do it, is by putting an IV in (scared of needles:( ) and then I asked my mom and she said they were gonna take the needle out and keep a little tube in there? I'm really confused about this. Help please.
- I had knee surgery when I was little, and I was TERRIFIED. Just ask to be put under first, and then have the IV put in. They did it for me, and I was totally fine, even when I woke up. They just took off the tape used to keep the needle in, and the only part that hurt was the tape being pulled from my skin. So don't sweat it.
- Q:What are the different diameter ranges available for plastic tubes?
- The diameter ranges for plastic tubes can vary widely, ranging from as small as a few millimeters to several inches in diameter. The specific diameter options available depend on the type of plastic used, the intended application, and the manufacturer's capabilities.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Tubes UPVC Drainage Pipes Hot Sale with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
