PVC Pressure Pipe 0.6MPa, 0.8MPa, 1.0MPa, 1.25MPa, 1.6MPa
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:What is the essential difference between natural rubber and three yuan ethylene propylene rubber?
- The glass transition temperature of natural rubber is -72 Deg. C, plastic flow temperature is 130 degrees centigrade, start decomposition temperature is 200 degrees centigrade, intense decomposition temperature of 270 DEG C. When natural rubber is vulcanized, its Tg rises, and no more viscous flow occurs.
- Q:Installation of rubber flexible joint
- The pipe must have a fixed support or fixed bracket, and the force of the stationary bracket must be greater than the axial force. Vertical installation and overhead installation products both ends need to install the corresponding fixed bracket and force support, to prevent the compression of.
- Q:Will the outside of the brake hose of the car burst apart?
- Now there is no leakage of brake oil, but also afraid of the oil leak in the running, after all, related to safety, I suggest not to save this money (brake hose is not expensive)
- Q:How much is a gas hose a metre? At least 1 meters, 5 safe?
- 1, liquefied petroleum gas will soften the ordinary rubber tube, please use special rubber tube.2, often check and clean hose, found aging, cracking, burn, rat worm bite marks, should be replaced immediately. It is recommended that the hose be replaced in two years under normal conditions.3, gas hose length of not more than 2 meters, after passing the place is not allowed to have electrical appliances.4, hose do not close to the stove surface, so as not to be flame barbecue.5, the hose does not cross the wall, doors and windows.6, do not press or fold the hose, so as not to plug, affecting the continuous gas supply.At the interface, and appliance, 7 hose valve, please use the pipe truss, to prevent the shedding of leakage.
- Q:Which is better for binding files with rubber tubes and cotton threads?
- In fact, the most suitable binding file is the file department I twine, such units are preserved, just to have you asked, hope to adopt
- Q:The rubber is sheathed on a metal cylinder. How should they be connected?
- With the combination of metal rubber is coated with adhesive before production and rubber vulcanization shaping, you can use this temporary experiment 502 geliahao for glue or adhesive, but the disadvantages of this thing with winter is not strong, the metal surface must be clean
- Q:Diameter 127mm steel pipe, and diameter 127mm rubber hose how to connect?
- According to GB1187, the rubber tube with an inner diameter of 127 has the maximum working pressure of 0.7MPa. The internal diameter tolerance is 2, and the outer diameter of the steel pipe is 127. If the purchase is appropriate, it should be sheathed, but the pipe factory is always taking negative tolerances.
- Q:How should we distinguish between the silicone hose and the rubber tube?
- Smell, silicone no flavor, rubber flavor, silicone general flexibility better, rubber mechanical better
- Q:Do you know the inner diameter of the hose for household shower hose is the same? Can different brands of shower and hose mix?
- Yes, it's easy to have this problem with sprinkler tubes. Because the hose and shower head inside and outside the effective length of the difference between the thread is too large, resulting in gaskets did not play a role in sealing, multi pad 1-2 pads can be, the gasket can be purchased at the hardware store to buy
- Q:Is it feasible to use rubber material, middle canvas layer and outer rubber material in PVC rubber tube?
- Improvement measures: 1, adjust the process, plastic material in place; mixing rubber plastic stability; vulcanized rubbing with low temperature long time vulcanization; 2, test cloth in curing temperature shrinkage coefficient is too big, consider changing cloth;
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pressure Pipe 0.6MPa, 0.8MPa, 1.0MPa, 1.25MPa, 1.6MPa
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
