Plcc2 5730 Series T0.8Mm 0.5Watt White Surface Middle Power White Color Type SMD LED

Ref Price:
$0.06 - 0.16 / pc
Loading Port:
Dongguan
Payment Terms:
L/C,T/T
Min Order Qty:
3000 Pcs pc
Supply Capability:
100000 Pcs Per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

  • The PLCC2 5730 Series T0.8mm 0.5Watt White Surface Middle Power White Color type SMD LED utilizing advanced InGaN chip technology.

  • The PLCC2 5730 Series T0.8mm 0.5Watt White Surface Middle Power White color type SMD LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence the mixture of blue light and yellow light results in white emission

  • The low current requirement makes the device ideal for portable equipment or other application where power is at a premium.

 

 

Features:

 

  • Longer Life Span

  • PLCC2 package

  • Heatproof design

  • Faster Turn-on time

  • High flux output

  • High current capability

  • Lower Maintenance Cost

  • White package

  • Optical indicator

  • Colorless clear window

  • Ideal for Tube lamp, backlight and light pipe application

  • Inter reflector

  • Wide Viewing Angle

  • Suitable for automatic placement requipment

  • Suitable for reflow and wave solder processes

  • Available on tape and reel (12mm tape)

  • Pb free

  • Rohs compliant

 

Applications:

 

  • Indicator and backlight for audio and vedio equipment

  • Indicator and backlight for office and family equipment

  • Flat backlight for LCD's, switches and symbols

  • Light pipe application

  • General use

 

 

Packing:

  • 3,000PCS/Reel, Reel Diameter: 180mm

  • 1Reel/Bag, Gross Weight: 0.13KG

  • 10Bags/Box, Box Size: (L)25cm(W)20cm(H)13cm, Gross Weight: 1.5KG

  • 5Boxes/CTN, CTN Size: (L)67mm(W)26cm(H)20cm, Gross Weight: 8KG

 

 

Notice:

  • It is recommended to store the products in the following conditions: Humidity: 60% RH, Max Temperature: 5°C ~ 30°C (41°F ~ 86°F)

  • Shelf life in sealed bag: 12month at<40°C and <90%RH.

  • After the bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing must be: Mounted within 1 year at factory conditions of<30°C / 60%RH, or stored at <20%RH within zip-lock sealed.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What determines the brightness of the patch LED?
Lamp brightness level itself, is also in the rated current situation, its brightness
Q:What is the rated current for the white patch LED?
LED high power and low power, small white rated current and LED wafer, such as a chip is 20MA two 40MA.... High power 0.5W, 100-150MA, 1W, 350MA current rating in the relevant product specifications
Q:Why is the patch LED blue light dim?
When making a batch of LED lights, the brightness values of various lights are in accordance with certain rules. Due to achieve a white balance, three RGB color brightness required by the ratio of 3:6:1, that is to say the blue light required brightness is very low.
Q:Patch LED features
The principle of luminescence is that of cold luminescence, not by heating or discharging light, so the component life is about 50~100 times longer than that of tungsten filament bulb, and about one hundred thousand hours.
Q:What is the principle used in SMD LED lamp, should pay attention to what the problem?
LED white is the light emitting diode, a PN junction to the most important use of SMD beads is the heat, according to the different manufacturer beads, glue package is not the same, should pay attention to pre baking time and temperature, the latter should pay attention to the patch temperature, the most important is the price, many manufacturers in order to cost savings, internal chip used is too small does not meet the standards, support steal frugal material, with iron, the failure cycle shortened, LED lamp can not reach the ideal effect. Again, the LED supply current must not exceed the rated value, which is an important factor in damage to lamps and lanterns
Q:What is patch LED?
LED is usually the lead pins form, need to be drilled on the printed circuit board, the LED pin is inserted in the hole, welded with wave soldering machine; and the patch type LED is used in welding surface, flat welded on the circuit board.
Q:Patch LED beads can be bought in what place?
SMD LED lamp is now very popular, mainly because of long service life, but also rarely appear dead lights or dark, but there are many defects exist
Q:What is patch SMD-LED?
Semiconductor wafers consist of two parts, one is P type semiconductor, in which the hole dominates, and the other end is N type semiconductor, which is mainly electronic here. But when the two semiconductors are connected, they form a P-N junction between them. When the current passes through the wire acting on the chip, the electrons are pushed into the P region. In the P region, electrons combine with the hole and then emit energy in the form of photons, which is the principle of LED luminescence. The wavelength of light, that is, the color of light, is determined by the material that forms the P-N junction.
Q:The ten patch LED lights are connected in parallel. The rated power is 5 watts. How much voltage do you need?
The voltage needs to be determined according to the product specification, usually 3.1 - 3.5V
Q:How many voltages and how many W drivers are used in series and parallel connection with 20 1W patches LED?
The voltage problem is determined by the size of your POWER SUPPLY, according to Ohm's Law: the series voltage is accumulated and the shunt voltage is the same.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range