LONKING Brand Single Drum Road Roller CDM512B

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 unit
Supply Capability:
500 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Construction Machinery CDM510B features:

B SERIES SINGLE DRUM VIBRATORY ROLLERS
Front& Rear Light for Night Operation
Panoramic Cabin / Tiltable Column
Open-loop Hydraulic Vibration System
Permco Hydraulic Components 
Wear And Impress Resistant
AC & Pad Foot Optional

Weight LoadModelCDM512B
Operating Weight (kg)12000
Distributed Weight for Drum(kg)6000
Distributed Weight for RearWheel(kg)6000
Compact  PerformanceStatic Linear Load for Drum(N/cm)277
Frequency(HZ)28
Nominal Amplitude(mm)1.8/0.9
Centrifugal Force(kN)280/180
Maneuverability PerfomanceDiameter of Drum(mm)1520
Width of Drum(mm)  (W2)2120
Rim Thickness of Drum(mm)25
Length﹡Width﹡Height(mm)(L﹡W1﹡H)5975*2260*3250
Min .Ground Clearance(mm) (h)420
Min .Steering Radius(mm)6500
Wheelbase(mm)  (L1)3135
Travel Speed(km/h)Forward1.9/3.3/9.1
Reverse1.9/3.3
Gradeability30%
Steering Angle30±1°
Swing Angle±10°
Tyre Specification17.5-25 12PR
EngineManufacturerYuchai
ModelYC6B120-T20
Rated Power(kW/rpm)85/2200
Min Fuel Consumption(g/kW•h)235
CapacityStorage Battery (V/Ah)12V﹡120Ah﹡2
Fuel Tank(L)220
Hydraulic Tank(L) 220
OthersDrive TypeMechanical
Vibration SystemOpen-loop Hydraulic Vibration System
Service BrakeAir Booster Caliper Rear Axle Brake
Parking BrakeShaft Controlling Brake of Gear Box


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the specific uses of loaders?
The following are the specific uses of loaders:1, loaders are mainly used for shovel, loading, unloading, transport of soil and stone bulk materials, rock and hard soil can also be slightly shovel operations.2, if you change the different devices, you can also do the lifting, lifting, loading and unloading of other materials work.3, in highway construction, mainly used for Subgrade Engineering filling and digging, asphalt and cement concrete field aggregate, loading and other operations. Because of its advantages of fast operation, good maneuverability and easy operation, it has developed rapidly and become the main machinery in the construction of earthwork.The loader is a widely used in earthwork construction machinery construction, highway, railway, electricity, ports, mines and other construction projects, it is mainly used for shovel of soil, sand, lime, coal and other bulk materials, can also be used as a mild shovel of ore and hard soil digging etc.. The structure of the loader includes the engine, torque converter, transmission box, front and rear drive axle, referred to as four pieces.
Q:Loader (forklift) 50 is the carrying capacity of 50T?
The loader is a widely used in earthwork construction machinery construction, highway, railway, electricity, ports, mines and other construction projects, it is mainly used for shovel of soil, sand, lime, coal and other bulk materials, can also be used as a mild shovel of ore and hard soil digging etc..
Q:How do loaders change hydraulic oil?
The same as changing the oil, the oil needs to be removed, cleaned and washed with gasoline
Q:What is the speed of a wheel loader?
There are two kinds: 1,10KM/h, this is mainly done in the mining area shovel work, requiring speed is not allowed to exceed 10KM/h, if exceeded, it will increase the body parts, including tires, wear and damage. 2,50KM/h, the sense of speed, for some of the more professional vehicles, imported wheeled loader in the mining area in the heavy speed in general for 35KM/h, no-load about not exceeding 50KM/h.
Q:What is the reason that the oil tank in the loader is too high?
The reason that the oil temperature of converter is too high is caused by the following aspects:1, the transmission oil level is too high or too lowCheck the oil quantity of the transmission oil pan and adjust the drive oil to the required position.The correct method of operation is:Park the machine on a horizontal floor, shift the handle in neutral and lock it. Loosen the choke and see if the oil is leaking. If the outflow of oil is too much, should be part of the oil release; if there is no oil flow, then the oil level is too low, should be filled with hydraulic transmission oil to the oil flow.2, variable speed pump damage, oil suction pipe impededThe function of the variable speed pump is to control the high pressure oil produced by the torque converter, and the high-pressure oil is distributed to the 2 shaft assembly through the variable speed distribution valve to realize the advance and retrogression of the forklift. The transmission pump damage will cause the gear supply to be impeded.With the increase of the loader's use time, the wear will be increased, the transmission pump will be discharged, and the transmission pressure and mechanical efficiency can not meet the requirements. Thus causing oil absorption pipeline oil supply is not smooth, the oil can not lubricate all parts of the movement, increased friction, but also cause overheating of the system. It should be noted that the transmission pump suction pipe leakage or obstruction phenomenon, will also cause insufficient flow, resulting in excessive oil temperature.3, hydraulic transmission oil metamorphismThe hydraulic transmission oil in the transmission is deteriorated, and the lubrication effect will not be reached. It will cause excessive wear and tear of the system and cause high temperature of the parts in the generator. It is recommended that the loader change the hydraulic transmission oil every 1500 hours.
Q:ZL50 loader fuel consumption calculation
Normal work, hourly fuel consumption itself can be calculated. Add fuel / hours = fuel consumption
Q:How much is the hourly fuel for excavators and loaders?
Excavators are about 18-42 litres an hour. Less bulldozers, about 10-20 liters. Note that different brands, different power.
Q:Are there any differences between bulldozers, loaders and forklifts?
Bulldozers are used for backfill works. The crawler loader is used for handling materials. Loaders, of course, can be used for backfill loaders. There are 2 types: wheel loaders and crawler loaders. Crawler loaders feature like bulldozers. Maybe what you see is crawler loaders.
Q:XCMG loader ZL50 how much horsepower production capacity?
ZL50220 horsepower production capacity of XCMG loader. The loader is a widely used in earthwork construction machinery construction, highway, railway, electricity, ports, mines and other construction projects, it is mainly used for shovel of soil, sand, lime, coal and other bulk materials, can also be used as a mild shovel of ore and hard soil digging etc.. Different auxiliary working equipment can be changed, and the lifting, lifting and other materials such as wood handling can also be carried out. In the road, especially in the construction of high-grade highways, loaders are used for filling and excavating of subgrade engineering, aggregate and loading of asphalt mixture and cement concrete field. In addition, the soil can be pushed, flat ground and other mechanical traction operations. As the loader has the advantages of fast operation, high efficiency, good maneuverability and easy operation, it has become one of the main types of earthwork construction in the construction of the project. Horsepower is a commonly used unit of measurement power in engineering. Metric horsepower, not British horsepower. Artificial agreement 1 metric horsepower is equal to 75 kilograms per second to raise 1 meters of the work done.
Q:Liugong loader production?
Liugong loader is produced in Guangxi, Liuzhou, and its performance in the domestic loader can also, now there are several models, and the engine may be different

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range