Frp Pipe Fittings, Frp Cross Connector Fittings for Frp Handrail
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 30000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Product Description
Material:FRP/UPVC,FRP/CPVC
Working Temperature:-20℃-55℃
Working Pressure:-0.001-1.6MPa
Color:Light Grey
Size:connector suitable for round tube with size:18mm,25mm,38mm,50mm
thickness of connector:3mm~8mm
we also can manufacture fibreglass elbow connector, fibreglass tee connector,fibreglass cross connector,fiberglass support.
Features
1. High anti-corrosion capability, long designed service time of 20 years;
2. Good hydraulic property, smooth inner surface with absolute roughness of 0.01mm, which is far less than that of carbon steel pipe or cast iron pipe;
3. Lightweight and facility to install and transport;
4. High specific intensity and reliable mechanical performance;
5. Low thermo-conductivity and small thermo-stress, which are allowed to be used in various conditions: exposed buried or suspended, in ocean or in deserts, freezing or humid;
6. Less joints and rapid assembly design: According to concrete engineering conditions, there are a several ways of connection designed for clients to choose, which include Adhesive-bonded Plug Joint, Adhesive-bonded End-to-end Joint, Flange Joint, Plug Joint with O-ring Gasket(with key-lock) and Thread Joint etc.
7. Good electrical insulation
8. Not rust, rot or corrode, not permeate, and without consequent pollution;
9. Anti-furring and vermiculate resistance;
10. Flexible design: the pipe can be designed on the shape and function according to its conditions of usage.
Technical Data
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
2400 | 32.6 | 30.3 | 28.4 | 41.8 | 38.8 | 34.6 | 53.4 | 44.6 | 42.8 |
2600 | 36.3 | 33.5 | 31.5 | 45.2 | 40.5 | 35.4 | 55.8 | 47.2 | 45.6 |
2800 | 39.6 | 36.0 | 34 | 49.4 | 45.1 | 42 | 62 | 53 | 51 |
3000 | 41.0 | 38.1 | 36.2 | 52 | 47 | 45.3 | 67 | 58.2 | 54 |
Pictures
- Q:CGCT what's the meaning of the GRP sand pipe?
- If the thickness of the pipe can meet the requirements of pressure, but can not meet the stiffness requirement, will choose to increase the thickness of sand to meet the stiffness (of course can not directly increase the sand thickness to meet the requirement of stiffness, but the cost is too high). Sand sandwiched glass fiber reinforced plastic pipes only have more than one sand sandwiched with glass fiber reinforced plastic pipes, and sand layer can be understood to replace glass fiber with quartz sand. The sand pipe with the same thickness is compared with the glass fiber reinforced plastic pipe, but the sand holding pipe is cheap, but the strength is poor; and the glass steel pipe is opposite.
- Q:How much is a glass fiber reinforced plastic sand pipe socket pipe fitting?
- Glass reinforced plastic sand pipe can increase rigidity by adding sand layer to the middle layer of pipe wall, which can meet any reasonable rigidity requirement of users. Another advantage of gfrpmp stiffness is bending deformation ability is very strong, for example, glass steel 5000Pa stiffness of sand in deformation of 20% cases, no delamination damage, and after unloading can restore the concrete pipe due to large deformation may be unable to bear have broken gfrpmp ring 150MPa ~ to the apparent flexural strength 450MPa, tensile and compressive and flexural strength of the concrete pipe were borne by steel and concrete, the apparent flexural strength is still far below the gfrpmp, only 8.5% ~ gfrpmp 26%. Generally, the service life of the drained glass fiber reinforced plastic sand pipe can be more than 50 years, and it is more than 2 times that of reinforced concrete pipes and other drainage pipes.
- Q:What are the standards for FRP pipes?
- The pressure test pump passes directly through the test hole on the top of the pipe. The water pressure of the pipeline working pressure of 1.5 times after the pump stops (during the operation to open the drain valve exhaust), observation of 2min, the pressure drop value does not exceed the test pressure and the nozzle 5%, no leakage, nozzle pressure test is qualified. If the pressure drop is relatively fast, it shows the sealing effect is not good, to re install, to ensure that the FRP pipe pressure test system overall success.
- Q:Winding method of glass fibre reinforced plastic pipeline anticorrosive glass fiber cloth
- 1) FRP reinforcement, length of rectangular duct is greater than 900mm, and the pipe length is more than 1250mm, should be strengthened. The reinforcement shall be made of bulk material (fiber reinforced plastic) and reinforced plate at the maximum stress, so as to increase the modulus of the section and increase the overall strength of the tube. FRP reinforcement can also be in the wind pipe production is completed, the treated metal or other corrosion resistant material for reinforcement, reinforcement and FRP as a whole, and with the same pipeline body cementitious material sealing gap2) hobas pipe surface thickness of the slurry to flatten the glass fiber mesh cloth texture is appropriate (see:). No dense air holes and grout leaks are allowed on the wall of the pipe to avoid the stress concentration under the bending tensile stress (positive air pressure) and the bending compressive stress (negative wind pressure).3) FRP pipe and flange corner should transition arc, transition radius to wall thickness of 0.8 ~ 1.2 times, improve the bearing capacity and the cantilever flange to avoid stress concentration. Fiberglass mesh shall be extended to the duct at the flange of the duct.
- Q:What kind of epoxy resin and formula do you need for making fiberglass pipe?
- By explaining the materials, tools, moulds, renovation and repair, process, structure and various products, the latest development direction, process technology and application of FRP products are described.
- Q:What are FRP pipes?
- Glass fiber reinforced plastic pipeline is a kind of light, high strength and corrosion resistant nonmetal pipe. It is a resin based glass fiber weight layer wound on the mandrel rotating on according to process requirements, and distance evenly between the fibers as Kamiishi Eisa in the sand layer.
- Q:How can I make up the broken glass fiber?
- If the glass fiber reinforced plastic pipe is broken, how do you fix it and repair it better?. It's better to replace it. I wonder how much pressure you use for fiberglass pipes. The proposal is to replace the pipeline.
- Q:The outer thermal protection layer of the pipeline is made of GFRP. Which guy knows the construction method?
- Usually with aluminum or iron sheet, with glass or steel, or the first time, I'm afraid the toughness is not enough.
- Q:What are FRP pipes made of?
- Light weightThe weight of the pipe is only 1/4 of the same size and the same length as the ductile iron pipe, and 1/10 of the cement pipe. The transportation is easy to handle and easy to install.
- Q:What qualifications do FRP pipes need to export to Australia?
- We often have glass steel pipe or other products, have not heard what the other party needs special qualifications, as long as the customers are willing to order your goods, general foreign customers before shipment is to inspection, acceptance, what qualifications do not need. The key is whether domestic related requirements are met. Besides, you can ask the customer directly
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Frp Pipe Fittings, Frp Cross Connector Fittings for Frp Handrail
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 30000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
