Energy Saving 500kg Metal Melting Induction Furnace for Steel Scrap
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging & Delivery
Packaging Detail: | 1 set of induction furnace will be packed by plywood case ,total three packings :furnace body and induction coil are packed together ; capacitor is packed in one plywood case; the power control cabinet is packed separately too; Volume : 2.8CBMadd 3.8CMBadd1.6CBM, the total is 8.2CBM More than 4 sets of 500kg induction furnace will sent by 20GP container More than 10 sets of 500kg induction furnaces will be sent by 40GP container |
Delivery Detail: | in 15 days after receiving the down payment |
Specifications
500kg Metal Melting Induction Furnace
1.steel ,copper,lead melting
2.for making metal ingot
3.500kg/batch
4.1650.C temp
500kgMetal Melting Induction Furnace for Steel Scrap
1.Metal melting Induction Furnace Applications: used for steel,iron ,copper ,aluminum melting before casting.
2.Metal Melting Induction Furnace Features: fast speed of melting, saving energy, less burnt loss, pure molten liquid.
3.Induction furnace's aluminum frame is adopted to small capacity melting furnace with reasonable structure and small capacity, convenient installation and simple maintenance, low maintenance cost.
4 .Melting Induction Furnace steel structure ( frame structure and cylinder structure ) is adopted to large capacity electric melting furnace which is equipped with magnetic yoke. The yoke will shield and reduce magnet leakage and prevent furnace body from over-heating, thus will improve efficiency and sustain the induction coil at the same time. Such will enhance the strength and reduce noise.
5.Furnace induction coils of fast melting furnace are double paralleled winded with prolonged coil to make sure the half capacity of furnace molten liquid can be heated by full load power output which will improve overall efficiency. Cooling system is equipped along with the induction coil prolong the lining life.
Technical parameter of Metal Melting Induction Furnace Series:
Model | Loading capacity(kg) | IF power (kw) | supply voltage(V) | IF-FRE (Hz) | Melting Rate(kg/h) | Power consumption (KWh/kg) | Rated power of transformer(KVA) |
GW-0.05 | 50 | 60 | 380/400 | 1000 | 45 | 0.56 | 63 |
GW-0.1 | 100 | 120 | 380/400 | 1000 | 85 | 0.56 | 100 |
GW-0.15 | 150 | 200 | 380/400 | 1000 | 125 | 0.55 | 160 |
GW-0.25 | 250 | 300 | 380/400 | 1000 | 200 | 0.55 | 250 |
GW-0.35 | 350 | 400 | 380/400 | 1000 | 300 | 0.67 | 315 |
GW-0.5 | 500 | 550 | 380/400 | 1000 | 350 | 0.67 | 400 |
GW-0.75 | 750 | 780 | 380/400 | 1000 | 500 | 0.67 | 500 |
GW-1 | 1000 | 1100 | 380/400 | 1000 | 800 | 0.67 | 800 |
GW-1.5 | 1500 | 1600 | 660 | 500 | 1200 | 0.61 | 1000 |
GW-2 | 2000 | 2000 | 660 | 500 | 1600 | 0.61 | 1250 |
GW-3 | 3000 | 3000 | 660 | 500 | 2400 | 0.61 | 2000 |
GW-4 | 4000 | 4000 | 660 | 500 | 3200 | 0.6 | 2500 |
GW-5 | 5000 | 5000 | 950 | 300 | 4500 | 0.6 | 3150 |
GW-6 | 6000 | 3300 | 950 | 300 | 5400 | 0.6 | 3500 |
GW-10 | 10000 | 3900 | 950 | 300 | 9000 | 0.56 | 4000 |
GW-15 | 15000 | 5000 | 950 | 300 | 13500 | 0.56 | 6300 |
GW-20 | 20000 | 8000 | 1000 | 200 | 18000 | 0.5 | 8000 |
- Q:What's the role of anchor bricks in industrial furnaces?
- These layers need to be joined and anchored. Anchor brick is this role. The heat insulation layer at the horizontal section of the flue is mostly a narrow cavity.
- Q:What is an industrial furnace pit?
- The creation and development of industrial kilns play an important role in the progress of mankind. Chinese appeared more perfect in the Shang Dynasty copper smelting furnace, furnace temperature is up to 1200 DEG C, up to 0.8 meters in diameter kiln stove.
- Q:What is the difference between industrial furnace masonry and ordinary masonry?
- Of course, the difference is like the difference between a hog cap and a 100 story building. See the industrial furnace manual.
- Q:What are the advantages of a vacuum furnace?
- Energy consumption is lower than salt bath furnace. Modern advanced vacuum industrial furnace heating chamber is made of high quality heat insulation material and wall, which can concentrate electric heating energy into heating chamber with remarkable energy saving effect.
- Q:Why does the burner of industrial furnace burn occasionally?
- The flameout protection system is made up of burner controller, electromagnetic valve and flame detector, and the flame detection mode is mainly based on the two forms of ultraviolet detection and electrode detection. By utilizing the electric conductivity of the flame, the circuit path of the combustion process generates a weak current, and when the signal amplifier is amplified, the flame is induced to exist, and the small power burner adopts the detection mode more, and is economical and practical.
- Q:What are the companies in the world that are currently engaged in metallurgical furnaces?
- Basically, no industrial furnace manufacturer can do all types of stoves.Often associated with the industry is very large,so your ranking is basically meaningless.
- Q:Selection of heat preservation material for industrial furnace
- In the neutral and oxidizing atmosphere, the tensile strength, toughness and fiber structure can be maintained for long term use. The temperature is 950-1400 centigrade. Excellent chemical stability; excellent thermal stability; excellent tensile strength; low thermal conductivity; low thermal capacity; excellent sound absorption and noise reduction performance.
- Q:What are the combustion equipments used in industrial boilers?
- The boiler is an energy conversion equipment. The energy input to the boiler has the chemical energy and the electric energy in the fuel. The boiler outputs steam with certain heat energy and high temperature water.
- Q:What is industrial furnace masonry?
- Plane construction must level, slope construction must find slope,refractory bricks must be selected and processed according to masonry requirements.
- Q:How many kinds of industrial electric furnaces are there?
- Industrial furnace according to the heating mode is divided into two categories: one is the fuel furnace, combustion heat with solid, liquid or gaseous fuel in the furnace for heating the workpiece; the second is in the furnace, the furnace converts electrical energy to heat the heat.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Energy Saving 500kg Metal Melting Induction Furnace for Steel Scrap
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords