Order On-line Tracking
"IF furnace" - also known as the "medium frequency coreless induction furnace"; apply to iron and steel, copper, Ceruse,aluminum, zinc, nickel, gold and silver and other metal melting, heating, insulation, and forging, sintering, hot rolling, bending forming pre-heat treatment. Is mainly used in melting foundry industry.
1,Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2,Rapid melting, the production cost is low; pollution is small, comply with environmental requirements;
3,A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material easy to replace.
4,Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
5,Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6,Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; power supply system diagnostic error function, easy maintenance.
|MF Melting furnace||Range of molten iron capacity||Ton||0.2|
|Max working temperature||C||1650|
|Cooling water||R ate of flow||ton/h||15|
|water inflow temperature||C||> 40|
|Temperature rise||C||> 20|
|Induction heater voltage||V||1500|
|Induction inner diameter||mm||420|
|Induction heater total height||mm||600|
|Turndown method||mechanical drive|
|MF Induction heating machine||Range of power||kw||160|
|Incoming line voltage||V||380|
|Max incoming line current||A||320|
|rectifier pulse number||pulse||6|
|cooling water||rate of flow||ton/h||50|
|water inflow temperature||C||> 35|
1. Manufacturer Overview
|Annual Output Value|
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|No.of Employees in Trade Department|
|No. of Production Lines|
|Product Price Range|