Ductile iron valve ,gate valve with a great price

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
100 PCS
Supply Capability:
1000 PCS/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Structure of Gate Valve Description:

 

A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed.When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.

 

2. Main Features of the Gate Valve:

• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber

•  Free of water pollution

• High manufacturing accuracy

• High strength

• Environmental protection and energy saving

• Good visual effect

3. Images

 

Ductile iron valve ,gate valve  with a great  price

Ductile iron valve ,gate valve  with a great  price

Ductile iron valve ,gate valve  with a great  price

4. Gate valve Specification

Gate valve

Ductile iron gate valve

Flange Gate valve

Our company can produce all kinds of valves, If you have any inquiry, please contact us, we will offer you our best price.

1,good quality and competitive prices

2,WRAS,CE,ISO 9001 approved.

3,AKZO epoxy coating available

Flanged ends according to BS,DIN,MSS,ANSI JIS

Designed according BS,DIN,MSS,ANSI JIS

Ductile Iron or Cast Iron body, bonnet and handwheel

Cast iron wedge, NBR/EPDM coated

Stainless steel stem, epoxy coating

Test: BS,DIN,MSS,ANSI JIS

 

5.FAQ

1. What's are the characteristics of gate valve?

The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. 

2. What is the work principle of gate valve ?

 The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. 

3.  What is the structure?

Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Gate valve is gate valve, gate valve specifications, model code is generally what?
Valve lock valve and gate valve. According to the code, the domestic valve type standard, valve type valve is composed of valve type, drive mode, valve connection, valve structure, sealing material, body material code to said gate type code Z.Gate valve: gate valve is one of the most commonly used shut-off valve, mainly used to connect or cut off the pipeline medium, not used to regulate the flow of media. A wide range of pressure, temperature and diameter is used, especially for medium and large diameter pipes.1, the main characteristics of gate valve(1) fluid resistance is small. The through hole of the gate body is straight through, and the flow direction of the medium does not change when flowing through the medium, so the flow resistance is smaller.(2) opening and closing is more labor-saving. When opening and closing, the direction of valve plate movement is perpendicular to the direction of flow of medium. Compared with the opening and closing more effort.(3) medium flow direction is generally unrestricted. The medium can flow in any direction from both sides and can achieve the purpose of switching on or cutting off. Easy to install, used in the flow direction of the medium may change in the pipeline.
Q:What do you mean by gate valve type RVHX-0150-10 and Z45X-16Q?
Z45x-16q, Z means gate valve, 4 means flange connection, 5 refers to dark rod gate valve, X means rubber seal, 16 refers to nominal pressure 1.6MpaRVHX means manual gate valve, 150 refers to the caliber of DN150, and 10 indicates nominal pressure of 1.0MPa
Q:Which is more expensive, bronze gate valve or brass gate valve?
The advantage of casting method is more obvious. The casting of stainless steel is much more difficult than that of brass.
Q:What are the specifications of the gate valves? Does the work pressure need to be marked separately?
Gate valve code Z, such as GB gate valve Z41H-16. Front is the valve type, and the back 16 represents the pressure of 16 kg, 1.6MPa
Q:What kind of copper gate valve copper content standards, there are no national standards?
Usually copper alloy, rarely used pure copper, there are GB
Q:What are the common standards for gate valves?
Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. The following common standards for Fujian Biaoguang valve for valve: design specification: JB/T 7746, API602 JB/T 7746, the length of the structure specification / thread socket factory test and inspection of JB/T1751/GB7306, ANSI: B16.11/B2.1: JB/T 9092, API598 pressure temperature: GB/T 9131, ANSI B16.34, MSS GB/T 12220 product ID: SP25 delivery specification: JB/T 7928
Q:Why can't the pressure measuring point be set at the two ends of the gate valve when measuring the resistance loss of the gate valve?
Because of the unsteady flow of fluid near the inlet and outlet of the valve, the measured data cannot be obtained relatively accurately.
Q:What gate DH10016, AM
The first Z represents the gate valve (the initial consonant of the Chinese phonetic alphabet for the gate); the second 2 represents the drive mode of the valve, that is, electro hydraulic drive.
Q:What are the types and product categories of knife gate valves?
Knife gate valve drive mode:Manual, sprocket, electric, pneumatic, hydraulic, bevel gear, electronically controlled, hydraulic and pneumatic drive. Knife gate shape: bright rod, dark rod two kinds. Knife gate valve material: cast iron, cast steel, carbon steel, stainless steel, fluorine and so on. Knife gate valve seal: hard sealing, soft sealing, single-sided sealing, double sided sealing and other material seal.
Q:What is the Z15T-16C letter of the gate valve?
The Z class code indicates the type of gate valve, gate valve is the first letter of the alphabet. The gate is manual driving mode, 1 said the connection form of gate valve for connecting thread, 5 represents the structure form of gate valve for rigid single gate, T gate said lining material of copper alloy, 16 PN1.6MPa nominal pressure valve. C said the valve body material is carbon steel.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range