Aluminium Foil stocks Aluminium Foilstock
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 10000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
1.Specification
Alloy: 1235/ 8011/ 8079
Temper: H14/H16/ H24/ H26
Thickness: 0.28mm-0.3mm(±0.01mm)
Width: 1000mm-2020mm(±1mm)
Core I.D:405/505/508mm
Standard: GB/T3198/ ASTM-B209
SURFACE QUALITY: GOOD APPEARANCE WITH NO-CRACK AND WELL-DISTRIBUTE GRAIN.
BUILD UP: TIGHT SLIT EDGES FREE FROM CRACKS, LAYER TO LAYER SHIFT NOT MORE THAN 2MM.
PROFILE: -0/+1%
FLATNESS: MILL FLATNESS COIL HAVING EDGE WAVINESS RATHER THAN CENTER BUCKLES SHALL BE ACCEPTABLE.
ROLLING PERFORMANCE: RE-ROLLABLE TO THE FINAL DESIRES GAUGES
2.Description
Aluminium foil (or aluminum foil) is aluminium prepared in thin metal leaves with a thickness less than 0.2 millimetres (8 mils); thinner gauges down to 6 micrometres (0.24 mils) are also commonly used.In the United States, foils are commonly gauged in thousandths of an inch or mils. Standard household foil is typically 0.016 mm (0.63 mils) thick, and heavy duty household foil is typically 0.024 mm (0.94 mils). Thefoil is pliable, and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimeslaminated to other materials such as plastics or paper to make them more useful. Aluminium foil supplantedtin foil in the mid 20th century.
3.Physical
Aluminium is a relatively soft, durable, lightweight, ductile and malleable metal with appearance ranging from silvery to dull gray, depending on the surface roughness. It is nonmagnetic and does not easily ignite. A fresh film of aluminium serves as a good reflector (approximately 92%) of visible light and an excellent reflector (as much as 98%) of medium and far infrared radiation. The yield strength of pure aluminium is 7–11 MPa, while aluminium alloys have yield strengths ranging from 200 MPa to 600 MPa.Aluminium has about one-third the density and stiffness of steel. It is easily machined, cast, drawn and extruded.
Aluminium atoms are arranged in a face-centered cubic (fcc) structure. Aluminium has a stacking-fault energy of approximately 200 mJ/m2.
4.Picture
5.FAQ
①How about your company?
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel,is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe
,America and Japan. OEM casting and forging service available according to customer’s requirements.
②How to guarantee the quality of the products?
We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
- Q:You have 350g of Aluminum Bromide (AlBr3) with a molecular weight of 266.6938 g/molIt is dissolved in water and the total volume of the solution is brought to 1.00LPlease explainThanks so much
- find moles: 350g of (AlBr3) divided by 266.69 g/mol 1.312 moles AlBr3 since it was dissolved in 1 literyou have 1.312 Molar AlBr3 since 1 mole of AlBr3 has 1 mole Al 1.312 Molar AlBr3 releases 1.312 Molar Al +3 ions since 1 mole of AlBr3 has 3 mole Br 1.312 Molar AlBr3 releases 3 times as much 3.397 Molar Br -1 ions 1.312 Molar Al +3 ions + 3.397 Molar Br -1 ions 5.249 Molar in ions total your answer, rounded to 3 sig figs is 5.25 Molar in ions
- Q:has dimensions of 25.0 by 17.5 and a mass of 2.24g.if the density of aluminum is 2.70g/cm3 calculate the thickness of the foil.i'm not sure how to do this,do i add the dimensions and then divide by the density? or take the density and divide by the mass? please help im trying every way and i'm just not sure what to do thanks for any help.
- well u get the volume of the sheet by dividing the mass/density , and u got already 2 dimensions so u get the 3rd one (thickness) by the equation volume 25.0 17.5 ? , (? : is the thickness) then u work it out
- Q:In a study of biocompatibility, I have created a porous alumina surface by anodising aluminium in phosphoric acid, but I have read [ in Davis et al, Journal of Materials Science 17 (1982) ] that there might be an aluminium phosphate monolayer on the surface.I want to remove this AlPO4 layer, leaving the desired nanoporous alumina belowI have read on a safety sheet that the AlPO4 may be soluble in 'concentrated hydrochloric acid' or 'alcohol' but I'm concerned the HCl will etch the alumina or aluminium substrateAnd details for an 'alcohol' solvent are not specificed.So my question is how do I selectively dissolve / etch the aluminium phosphate leaving the porous alumina below?
- i dont really know but u can tray scrubbing it off alpo4 being a salt should get removed easily, also maybe a dilute hlc should be able to remove it but im not that sure
- Q:If you can recycle plastic, paper, cans, and glass in your house and turn organic waste into compost outside?
- Plastics are usually not recyclable but some isYour local waste disposal should have plastic recycling, where they sort it out Bioplastics are coming and are already on the market to a limited extentThe best of these are actually compostable Any metal is recyclable, and most recycling centers will take aluminum in any form Napkins can go in the landfill, they or basically organic waste.
- Q:I am also interested in the worth of a pair as wellThey are 6 1/2 X 9 inches and are in an octagon shapeThey are heave for a small speakerThe back of it it metal, and looks like brass or browned tin or aluminumIt has the chrysler symbol on the magnet, and says quot;premium made in the usaquot; as well as numbersI can send pictures if requested, please help, im hoping to sell themI found them in my 1991 firebird formula in the sail pannelThank you fir the help!
- They sometimes use helicopters to extract the vertical structural membersIt's impressive, I've seen it a couple of times with a HUGE helicopter.
- Q:I'm making my first still to distill spirits and was wondering if it is alright to use an aluminum container, opposed to a steel container, as the boiler in the still. Could the aluminum produce any unexpected harmful side effects.
- Aluminum can be toxic in very high concentrations, but using aluminum as cookware (or still-ware) is very unlikely to cause toxicity. The only time aluminum may cause a problem is when cooking tomatoes or highly acidic foods in untreated aluminum cookware. Even then, the level of aluminum that gets cooked off into the food is negligible. It's better, however, to make sure that the cookware you are using in the still is food safe. Copper may be a better choice, but I'm sure that's more expensive. Hope this helps. You may want to check your local area to see if there's a home-brewing supply, or a beer-makers supply company and they may be more helpful about a good container to use for the boiler.
- Q:Can I put an aluminum cake pan in the oven?
- Higher is better, definitely 300 or more for sheets that won't get fuzzy and uncomfortable.
- Q:I need some information on a DIY (Do It Yourself, for the layman) keyboard and instrument stand that will support a couple of keyboards and drum machinesI would like to make it out of as light a weight material as possibleWould PVC be strong enoughWhere can I find inexpensive aluminum tubing? Where can I find further information on building a stand/rack myself?
- Call the ACLUThey might defend him because some redneck Barney Fife is trying to take the Patriot Act and run riot with it.
- Q:I'm wondering if there's any performance differential between a glass pipe and a porcelain pipe.I paid a bit more for this porcelain pipe so I'm hoping so.thanks
- I've smoked from everything you can think of including an aluminum foil bowl which is very dangerous and from my experience I don't think there's a huge difference between porcelain and glassPorcelain is just a more expensive material than glass which is why it cost you moreBut there really isn't a difference in smoking performance I personally prefer glass pipes :)
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aluminium Foil stocks Aluminium Foilstock
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 10000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords