Standard Size: 595mm*595mm, 605mm*605mm
Standard Thickness: 8, 9, 10, 12, 14, 15mm
Edge Detail: Square Edge, Tegular Edge (≥12mm)
Technical Data of Acoustic Mineral Fiber Ceiling:
Fire resistance: Class B1 (standard GB 8624-1997)
Moisture rate (%): ≤3.5 (40℃,70%RH)
Light reflect: 0.70-0.80
Sagging resistant properties: ≤0.35mm
Humidity Resistance: ≥85%
Main advantages of Acoustic Mineral Fiber Ceiling:
High humidity resistance properties
Excellent light reflectance
No content of asbestos
Zero release of CH2O
- Q:How to install aluminum alloy decorative panels?
- The method of fixing the slats on a specially made keel
Will be stuck in the keel, keel and base fixed. The keel is stamped from galvanized steel sheet, and when the slats are installed, the slats are placed on top of the keel. This method is simple, reliable, easy to replace.
The above is only one of the said, in fact, many forms of keel, slats cross-section varied, but no matter what kind of cross-section, need to use keel and lath supporting. Keel can be fixed directly with the structure, the keel can also be fixed on the frame, that is, before the keel is not well, should be good structure, and then the keel fixed on the frame.
- Q:What is the external wall insulation decoration integration, external wall insulation decorative panels which manufacturers?
- To ceramic sheet for the panel, hard foam polyurethane board, foam ceramic plate or thermosetting modified polystyrene board for the insulation material, through the adhesive in the factory made with insulation and decorative function of the composite sheet, referred to as ultra-thin tile insulation decoration board.
- Q:Will experts charcoal wood decorative panels can be close fight? How is it seamless?
- The key depends on the stability of this carbonized wood decorative panels, whether it will moisture expansion deformation,
If you can ensure stability, you can secretly fight.
The so-called "seamless" is only relative to the process of sewing the construction process, is not seamless, but the seam is very fine, less than 1mm, 0.5mm or so.
- Q:Will "plastic decorative panels" can paint to change color?
- Can change color, the general car surrounded by itself is plastic.
- Q:What is the glue for indoor sticky veneer?
- Universal glue. I hope my solution will help you
- Q:What board is called decorative plate
- Decorative panels are usually used in the process of the product. In general we use a transparent paint. Under the wood grain effect. Commonly used decorative panels are: Sapele, red walnut, black walnut, red cherry, white oak, white maple, golden grapefruit, red sandalwood, etc.
- Q:How does the modern Reina trunk trim the pry open?
- Hello, with a small Alice look like it
- Q:Carved decorative plate which material is not easy to deformation
- Metal carved insulation board durable. On the wind and rain erosion and air pollution is not sensitive, with good self-cleaning ability, the general dust pollution is not sensitive, with good self-cleaning ability, the general dust pollution can be cleaned with water as fresh. In foreign countries have been used for more than 20 years of the wall, now look still newer;
- Q:Audi q3 tires decorative panels how to disassemble
- Hello! Buy tires first to determine the specifications of the original vehicle tires. Usually the car tire size logo is *** / ** R *** part is the number. (For example: 205 / 55R16) to buy the tire specifications must be consistent with the original car assembly tire specifications, if necessary to change the tire specifications must go to a professional modified store for tire upgrades, or consult the car manufacturer.
- Q:What are the construction and application areas of the external wall insulation board?
- There is no structure of the insulation board, the insulation system is constructed, the external wall insulation board system consists of adhesive layer, insulation layer, wiping layer, anchor, metal bracket and finishes.
Apply to the new, expansion, alteration of residential buildings and public buildings outside the wall insulation and external wall insulation
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range