Q:How do you realize the buffer and self closing of drawer slide rail?

Drawer slide buffer is realized by a damper < something > icon, it is damper, there are two categories, the first is hydraulic damper, inside its pipeline is filled with oil, thus forming resistance when the slide is closed, so there is a buffer effect. The second is the pressure, the shape is the same, the principle is the same, the only difference is that the damper is filled with gas.

Q:How do I use the damping rail for the wardrobe?

Damping, also called damping slide drawer. The utility model comprises a panel, a soleplate, a backboard, a side plate and a slide rail. The utility model is characterized in that a damper is symmetrically arranged on the soleplate; the side plate is astride on the slide rail; the panel, the bottom plate and the back plate are connected with the side plate.

Q:The cabinet drawer? Riding? Tiebang? Underpinning the drawer

At least smoke, also called luxury smoke, drawer help is saddle shaped, relatively beautiful appearance, slide rail is used for a dedicated slide rail, generally divided into damping and self closing, and some have pulled out of all out. Bearing generally around 25 kilograms.

Q:Method for mounting slide rail of stainless steel drawer!

Slides can be separated from you to make a mark and slide on a nail in the eye position then slide the length of the cabinet in the same size to find the inner rail lateral peg as long as the drawer and the outside of the devil has been on it in the drawer

Q:How to disassemble the drawer slide?

Pull the drawer out and the long black plastic strip leaks out at the end of the slide. You can pull it up and pull it off. Don't push too hard!

Q:Drawer slide is not good, what should I do?

Put more lubricating oil onto the ball

Q:How can I get the slide drawer?

What you said is not the three rail or two track rail?? you say I don't understand. It is all not the same name?? three section of the track is good for demolition, pull out the drawers. Pull the top. This will be able to see the track has a black strip, caught in the middle track, pull, and see if you can pull, then put the small black hand pressed down. Right down to the left up. Like this. Hold your drawer, then pull, pull out is not the kind of track is not what you say now. Is this kind of track.

Q:Furniture rail installation method

Secondly, the five plates are assembled by screw, drawer, drawer panel with a slot, after processing, the drawer has been installed in the drawer, let the adjusting screw holes coincide, then push the locking drawer locking nail and slide.

Q:Excuse me, my chest drawer is two slide type, how can I take out the drawer.

If it is two day three day orbit, with sliding beads, you put the drawer out, pointed something on the track will be exposed to a plastic, you have the opposite direction, upward or downward, on both sides of the pull and press, and then you can take out the.

Q:What's the reason that the drawer with a slide always slides out?

The chute is not on the horizontal line, and the inside slides down a little bit. The drawer of your house is to walk outside, should be installed on the side of the side of the ramp is fixed on the high side, the drawer outside the baffle is greater than the side of the side, so to the direction of heavy sliding. The inside is light and heavy. Just tune it. This is the wrong way to install the slide. Ha ha, I wish you success!