2.5 Tons Diesel Powered Forklift CPCD25FR

Ref Price:
$5,000.00 - 8,000.00 / unit
Loading Port:
Shanghai
Payment Terms:
TT or LC
Min Order Qty:
1 unit
Supply Capability:
1 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Forklift Description: 

 

Forklifts are rated for loads at a specified maximum weight and a specified forward center of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate without the permission of the forklift manufacturer.

 

An important aspect of forklift operation is that most have rear-wheel steering. While this increases maneuverability in tight cornering situations, it differs from a driver’s traditional experience with other wheeled vehicles. While steering, as there is no caster action, it is unnecessary to apply steering force to maintain a constant rate of turn.

 

Another critical characteristic of the forklift is its instability. The forklift and load must be considered a unit with a continually varying center of gravity with every movement of the load. A forklift must never negotiate a turn at speed with a raised load, where centrifugal and gravitational forces may combine to cause a disastrous tip-over accident. The forklift are designed with a load limit for the forks which is decreased with fork elevation and undercutting of the load (i.e., when a load does not butt against the fork "L"). A loading plate for loading reference is usually located on the forklift. A forklift should not be used as a personnel lift without the fitting of specific safety equipment, such as a "cherry picker" or "cage".

 

Forklifts are a critical element of warehouses and distribution centers. It’s imperative that these structures be designed to accommodate their efficient and safe movement. In the case of Drive-In/Drive-Thru Racking, a forklift needs to travel inside a storage bay that is multiple pallet positions deep to place or retrieve a pallet. Often, forklift drivers are guided into the bay through guide rails on the floor and the pallet is placed on cantilevered arms or rails. These maneuvers require well-trained operators. Since every pallet requires the truck to enter the storage structure, damage is more common than with other types of storage. In designing a drive-in system, dimensions of the fork truck, including overall width and mast width, must be carefully considered.

 

 

Forklift instructors throughout the UK tend to operate either as small independent training companies or as a part of a larger training provider. Training is delivered in one of two ways; on-site (sometimes referred to as in-house training) where training is delivered to a clients' premises making use of their own equipment, or off-site (public courses) at a training centre. Training centres offer the opportunity for the unemployed with little or no forklift operating experience to achieve a certificate of competence and increase their employment opportunities. Training certification standards at schools tends to follow closely the standard required by there individual Training Standards Accrediting Body to which they are affiliated. It is not unusual for a Training school to be registered with one or more body at any one time.

 

The British Industrial Truck Association (BITA) categorises the different forklift truck types into groups and assigned a unique identifier to each classification. Known as the ‘BITA List’ it has become accepted as a standard in the UK. Forklift training certificates display the appropriate BITA classification to clearly identify the confines of the certification.

 


Forklift Specification:

 

Model

CPCD

25FR

Load capacity kg

2500kg

Load center mm

500mm

Power type

Diesel

Max.lifting speeds(with load)mm/s

400mm/s

Max.Driving speeds(with without load) km/h

17/19km/h

Max.Towing speeds

15/10kN

(with/without load)kN

 

Gradeability(with/without load)%

15/20%

H1 Lifting height mm

3000mm

Free lift mm

60mm

Tilting angles(forward-backward) 。

6/12

Min. turning radius mm

2450mm

Min. right angle aisle width mm

2050mm

Min. under-clearance mm

110mm

Dimensions

A Overall length(inincluding fork) mm

3605mm

B Overall width mm

1160mm

H Overall height(mast lowered) mm

2095mm

H2 Overall height (mast extend) mm

4080mm

H3 Overall height to overhead guard mm

2095mm

A1 Fork overhang mm

451mm

A2 Wheel base mm

1640mm

Tread

B1 Front tread mm

970mm

B2 Rear tread mm

970mm

Tyre

Front tyre

7.00-12

Rear tyre

6.00-9

Total weight kg

3600kg

B3 Fork width mm

122mm

H4 Fork thickness mm

40mm

Backrest height mm

 

A3 Fork length mm

1070mm

Engine

Engine model

490

Rate power KW

39KW

Rotate Speed At Rate Power rpm

2650rpm

Max.torque Nm

157Nm

Rotate speed at max torque rpm

1980rpm

Type of power shift

Hydraulic


 

 Forklift Images:

 

 

FAQ of forklift:

Q: What’s the function of forklift?

A: A forklift truck (also called a lift truck, a fork truck, or a forklift) is a powered industrial truck used to lift and move materials short distances. The forklift was developed in the early 20th century by various companies including the transmission manufacturing company Clark and the hoist company Yale & Towne Manufacturing. Following World War II the use and development of the forklift truck has greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing operations.

 

Q: What’s the general operations of forklift:

A: Forklift cab with control layout.

Forklifts are rated for loads at a specified maximum weight and a specified forward center of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate without the permission of the forklift manufacturer.

 

Q: What are the Forklift safety Standards?

A: 1, Forklift safety is subject to a variety of standards world wide. The most important standard is the ANSI B56—of which stewardship has now been passed from the American National Standards Institute (ANSI) to the Industrial Truck Standards Development Foundation after multi-year negotiations. ITSDF is a non-profit organization whose only purpose is the promulgation and modernization of the B56 standard.  

2, Other forklift safety standards have been implemented in the United States by the Occupational Safety and Health Administration (OSHA) and in the United Kingdom by the Health and Safety Executive.

3, Driver safety: In many countries forklift truck operators must be trained and certified to operate forklift trucks. Certification may be required for each individual class of lift that an operator would use.

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:The basics of driving a forklift
When uninstalling, it is strictly forbidden to unload the plates, turn the pan or use "archery" to avoid damaging the fork. The strict execution of the "five non-fork" in the job: the center of load of the center of mass of the cargo over the fork. A single fork is not a fork when it is carried; Cargo stacking without a fork; A fork may damage the cargo without a fork. Exceed the nominal load of the forklift or the quality of the cargo. When the goods are easily broken, valuables or loaded with unstable goods, or when the goods exceed the height of the portal, the safety ropes shall be bound and the special persons shall be guided when necessary. When two forklifts unload the same cargo at the same time, they should be in contact. When taking the goods at the platform, the fork can only be taken from the platform. There should be some safety precautions when crossing the cross.
Q:How to drive a forklift? Detailed point!
If the forklift is stepless left foot will on not move pedal, if it is mechanical left foot on the clutch, for dealing with emergencies, right foot to step on the gas pedal, according to the working environment to master speed at any time, at first does not require fast, skilled speed up naturally
Q:What is the cause of my forklift
There are a lot of reasons why you can't start, and the owner doesn't say whether it's an internal combustion fork or a forklift truck.
Q:What's the difference between a forklift?
There are two types of forklift certificates: operation and classification 1, operation certificate is engaged in the work of the proof, in pledges inspect bureau to deal with, special operations personnel must accept adapted to this type of work, special security technology training, tested and approved by the safety technical theory and practical operation skills examination qualified and obtain special operations after the operation, can mount guard operation; No training, or training appraisal, may not be done.
Q:What is the safe speed of the forklift truck
The speed of the forklift is determined by the engine. The electric bottle can reach speeds of up to 14km/h to reach 20km/h, not that it can't be sped up, just for the sake of safety, not for forklift truck speed.
Q:Electric forklifts can be used for a long time
Look at the use case, look at work environment, look at worker's labor attitude, average about a year and a half.
Q:The forklift license test is for those
Ordinary driving forklift belongs to the special vehicle, can't registration, registration unit is the local bureau of quality and technical supervision of special equipment safety supervision department registration first, when they reach a certain number of unified exam. The exam is organized by the "special equipment operator exam center". Exam fees according to the local "about special equipment operating personnel safety skills examination fee standards", usually specialized technical theory test costs 40 yuan/person. Time, practical test costs about 120 yuan/person.. For six years, every two years.
Q:People leave the forklift and do what and what to pay attention to when parking
Before leaving the forklift, remove the cargo fork completely, hold the hand brake and remove the key of the switch. Press the emergency isolation switch. If you park the forklift on a slope, you must plug the wheels.
Q:How to start a forklift? Say detailed point
Do not drive when the fork is raised: when the fork rises, do not drive the forklift truck, in case the goods are depraved. Do not drive on the side of the road: make sure the forklift has sufficient safety distance from the side of the road or platform to prevent the forklift from falling. Forklift maintenance: the forklift truck is not allowed to be modified, and the daily inspection and repair of the forklift is not allowed. When the forklift has any damage or failure, the forklift truck is stopped to be repaired; The forklift truck cannot operate a forklift truck until it is overhauled. When checking the electrical system, turn off the key switch and pull out the battery plug. When adding fuel, the driver should not be in the car, and the engine will be out of the fire. When checking the battery level of the battery or tank, don't fire the ignition. Avoid sudden start, quick start, sharp turn and sudden shift of direction, and stop the sudden acceleration. You should always do a forklift based on your surroundings. The control handle is not allowed to be controlled all of a sudden: the hydraulic control handle must be operated slowly, either in full load or in empty load. When a cargo fork is at a high point, a sudden manipulation of the handle can cause the risk of deterioration of the goods or the tipping of the forklift. Don't rush to the shelves. When the door is tilted forward, the shelf is forbidden to rise: when lifting a cargo or starting a forklift, the door frame should be put in place to stabilize the goods. Under fork condition, the door should not be tilted forward. When lifting or lifting the goods, they should stop first. When the forklift is tilted, do not unload the cargo.
Q:How to change oil for a forklift, no slots and jacks
You can do it with a little bit of energy and you can see it on the low side of the low shell and the oil screw

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range