Gasoline Forklift Truck- FG25/30/35
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | | FG25 | FG30 | FG35 |
Power | | Gasoline | Gasoline | Gasoline |
Operator type | | seat | seat | seat |
Capacity/rated load | Q(kg) | 2500 | 3000 | 3500 |
Load centre distance | c(mm) | 500 | 500 | 500 |
Lift height | h3(mm) | 3000-6000 | 3000-6000 | 3000-6000 |
Load distance,centre of drive axle to fork | x(mm) | 485 | 485 | 485 |
Wheelbase | y(mm) | 1700 | ||
Service weight | kg | 3980 | 4350 | 4457 |
Tyres type | | pneumatic/solid | ||
Tyre size,front | mm | φ657X172 | φ695X218 | φ695X218 |
Tyre size rear | mm | φ527X150 | φ577X162 | φ577X162 |
Tread,front | b10(mm) | 970 | 1000 | 1000 |
Tread,rear | b11(mm) | 970 | ||
Tilt of mast/fork carriage forward/backward | Grad | 6°~12° | ||
Height,mast lowered | h1(mm) | 2040-2654 | 2070-2684 | 2070-2684 |
Height,mast extended | h4(mm) | 4067-7067 | 4250-7250 | 4250-7250 |
Height of overhead guard(cabin) | h6(mm) | 2060 | 2090 | 2090 |
Seat height/stand height | h7(mm) | 1052 | 1064 | 1064 |
Overall length | l1(mm) | 3650 | 3750 | 3860 |
Length to face of forks | l2(mm) | 2580 | 2680 | 2790 |
Overall width | b1(mm) | 1150 | 1205 | 1225 |
Fork dimensions | s/e/l(mm) | 40/130/1070 | 45/130/1070 | 45/140/1070 |
Fork-carriage width | b3(mm) | 1160 | 1200 | 1200 |
Ground clearance,centre of wheelbase | m2(mm) | 135 | 150 | 150 |
Aisle width for pallets 1000×1200 crossways | Ast(mm) | 3790 | 3950 | 4000 |
Aisle width for pallets 800×1200 lengthways | Ast(mm) | 3590 | 3750 | 3800 |
Turning radius | Wa(mm) | 2190 | 2350 | 2400 |
Internal turning radius | b13(mm) | 875 | 902 | 902 |
Lift speed,laden/unladen | m/s | 460 | 450 | 400 |
Type of drive control | | mechanical/hydraulic |
Stability
• Cab design by SIP point , conform to EN- ISO 5353, ensure compartment with great comfortable and fatigue- free operating.
• Leak-free O-rings imported from Japan NOK face seal fittings reduce leaks
• Drive axle and steering axle , transmission made by TCM technology , float type structure achieve a flexible connection between engine and frame , reduce vibrations greatly. JAPAN SHIMADSU type hydraulic pump with low noise
• The cylinder have dual safety system — with lowering safety valve and lowering limited valve.
Safety
• Advanced multifunction LCD/digital display provides fast and accurate Monitoring truck status.
• The cylinder offers new design by dual safety system — with lowering safety valve and lowering limited valve.
• The electric F/R lever with neutral safety start system.
• An intelligent sensor and buffer monitoring system: with safty check valve to absorb the mast drop speed automatically to avoid crashing the floor and damaging goods.
Ergonomics & Efficiency
• Wide view mast, clear visibility.
• Cowl-mounted hydraulic levers design offers big operation space.
• Adjustable tilt steering column offers the most comfortable operator position.
• The optional of the magnetic electric F/R control lever ,simple for operation and less efforts.
• Low noise <82AB(A) : sound absorbing material mounted within the front engine cover, with air intake system on the back pillars of overhead guard .maximum reduces the noise.
• New designed aluminum structural radiators.
Easy Maintenance
• Insulated engine cover with gas-filled cylinders with automatic locking device to assist in opening and preventing the cover from unexpected closing. The cover can opens up to 78-90 degrees.
• Steering axle uses the traverse tanks. The compact construction with large open space, easy to maintain.
• Use integral sealed electric circuitry. Optimized the control system and easy maintenance.
• Floor board are easily removed, reduce time for quick service assess.
- Q:Can a power supply of 48-volt battery pack a 12 volt fan
- Is it a dc fan? If that's the case, use a decompression module and estimate a few dollars to a dozen or so. If the 48V is composed of a 12-volt battery pack, then the two lines will be straight forward
- Q:Diesel forklifts generally take a long time to replace the oil
- Change the oil and oil filter in about 200 hours, if the environment is bad, the air filter will be cleared.
- Q:Basic requirements for forklift operation
- 4, the forklift safety manual: The operation of an electric forklift driver must meet the safety requirements Before running, check the effectiveness of the brake system and the battery charge. If the defect is found, it will be processed before operation 2, when transporting the goods are not allowed to use a single pallet fork goods, goods are not allowed to use fork tip to stir up the goods, must be all goods fork inserted below and make the goods evenly on the pallet fork Make a smooth start, make sure to slow down before turning, not too fast for normal speed and smooth braking
- Q:There are several forklift drivers in China
- Widely used in the national economy, such as station, port, airport, factory, warehouse, etc., it is an efficient equipment for mechanized loading and unloading, stacking and short distance transportation
- Q:Why are there two kinds of special equipment operators
- The forklift belongs to the bureau of quality and technical supervision, and of course the special equipment operator's certificate is good. Your homework must be a forklift driver. It's a special equipment operator, it's not something else.
- Q:People leave the forklift and do what and what to pay attention to when parking
- To leave the forklift when the goods are not on the shelf, and to leave the forklift truck before leaving the forklift truck, and have to remove the goods or take down the cargo fork; 2, stop the brake handle to kill or press the brake switch; The engine is out of fire and the power goes out. Remove the key.
- Q:4 tons of cross-country forklift lifts the four-meter cross-country forklift
- Choose the type of forklift fuel for your own condition Internal combustion forklift: suitable for normal operating conditions, outdoor or ventilated conditions and no special requirements for exhaust emissions Advantage: the price is relatively inexpensive, easy to use, long working hours, low environmental requirements, low maintenance requirements and low cost. Disadvantages: large noise and high emissions.
- Q:A forklift applies to which industries
- Explosion-proof forklift is the biggest characteristic of explosion-proof, it is suitable for petroleum, chemical industry, military industry, pharmaceutical, paint, coating, light industry and other system of enterprises and the port, railway, freight yard, warehouse containing combustible gas mixture, such as explosive mixture of dangerous sites in engaged in material handling, stacking and short handling operations, like this game can be customized explosion-proof forklift, formulated according to the parameter and function requirement
- Q:What is the engine displacement of 3T forklift?
- Displacement is an important structural parameter that measures the size of the engine. The engine's performance indicators are closely related to the emissions, and generally, the larger the vehicle's emissions, the higher the power. It is commonly used as the basis for evaluating different engine sizes.
- Q:Why is the forklift water tank heating?
- For many reasons: there are plenty of pump is out of order, have a plenty of water pump belt is loose, have a plenty of the tank wall, also have a plenty of water pump clogged, still have a plenty of cylinder cushion ate (bad), with the summer brought out the temperature cut-off valve, cut-off valve is broken also affects the water temperature. Look at you.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Gasoline Forklift Truck- FG25/30/35
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords