Q:How the concrete mixer works

The concrete mixer can be divided into two categories: self-fall and strong. Self-falling concrete mixer is suitable for mixing plastic concrete. The stirring effect of a strong mixer is stronger than that of the falling mixer, which is suitable for mixing hard concrete and lightweight aggregate concrete. A concrete mixer is a machine that stirs a certain mix of sand, stone, cement and water into a uniform quality concrete that meets the quality requirements. The concrete mixer can be divided into two categories: self-fall and strong.

Q:How does a concrete mixer operate

If the machine is relatively new, the button will have, it's going to go up, go down, automatically add water, add water by hand, mix it up, mix it up, stop, vibrate

Q:For example, what is the more detailed and better td-50 td-80 td-60

That's right, tipping over, tdcm125-6d Turn out the material JZC350 (rdcm350-6e, rdcm350-8eh, rdcm350-11e), JZC500, JZR750, JZR1000 Forced JS500, JS750

Q:How many tiles are in the concrete mixer on the site

7500L concrete mixer, 7.5kw, and 3.5kw, total power of about 12KW

Q:What is the difference between a concrete mixer, a JL type and a JW type?

The jw-375 concrete mixer is a turbo-reinforced concrete mixer, which is used for hard and semi-dry concrete. The main body of this mixer consists of the frame, the feeding system, the mixing system, the water supply system, the control device and the transmission mechanism.

Q:What are the pros and cons of a concrete mixer?

If the concrete is not used, it is recommended to buy concrete from the concrete station Small mixers can't keep up with the efficiency, plus the cost of labor Better to buy from the concrete station

Q:Where can a concrete mixer be used?

A concrete mixer is a machine that mixes cement, gravel and water into concrete mixtures. It consists mainly of mixing, loading and unloading mechanism, water supply system, original motive, transmission mechanism, frame and supporting device. Concrete mixer, including through the shaft connected to the transmission mechanism of driving and driven by the actuator cylinder, the cylinder cylinder jacket around the cylinder cylinder gear ring set, set with the ring gear meshing gear on the shaft. The utility model has simple structure, reasonable, the use of mesh gear, gear ring, which can effectively overcome the fog had, between the roller and the mixer drum skid phenomenon; The driving mechanism can further assure the skidding between the roller and the mixer. Are suitable for all kinds of medium and small precast file and water conservancy, Bridges, roads, ports, docks, industrial and civil building engineering stirring harsh concrete, plastic concrete, active concrete and lightweight aggregate concrete and mortar

Q:Concrete mixers need to be aware of which things

The concrete mixer should be set in a flat position, and the wheel shaft will be placed on the back and back of the square, so that the tyre should be set up so that it will not move during the run. 2, the concrete mixer should be protected by secondary leakage, and after the power connection is put on before work, it must be carefully checked, and it will be used only if it is considered qualified by the empty car test. Commissioning should check when mixing drum speed whether appropriate, under normal circumstances, the proportion of empty car speed car was faster (after loading) 2 ~ 3, such as the difference is more, should adjust pulley and the proportion of the driving wheel. The rotating direction of the mixing cylinder shall be in accordance with the direction of the direction of the arrow, if it is not true, the motor connection shall be corrected. 4, check whether the transmission clutch and brake is flexible and reliable, wire rope is damaged, track pulley are in good condition, surrounded by accessibility and lubrication situation of each part. After turning on the machine, it is often noted that the parts of the concrete mixer are working properly. When stop, check whether the concrete mixer blade is bent and the screw is loose or not. 6, when the completion of concrete mixing or pause is expected to more than 1 h, besides excess stock out of the net, the application of stones and water to pour into shaking inside the cylinder, turn on, put the glue on the cylinder of the mortar all discharged after rinse. No water is allowed in the cylinder in case the cylinder and blade are rusted. It should also clean up the outside of the mixing cylinder to keep the machine clean. 7, after work and stop after work, should pull off power without power, and lock switch box, to assure safety.

Q:250 litres of the blender once made concrete

250-liter blender once gives 200 to 220 litres of concrete. 250 litres of time the amount of concrete mixer quantitative is 250 litres, but is usually not meet this standard, because in the process of mixing concrete appear adhesion or water loss, so the volume will narrow. The actual quantity is approximately 80% of the quantity. A concrete mixer is a machine that mixes cement, gravel and water into concrete mixtures. It consists mainly of mixing, loading and unloading mechanism, water supply system, original motive, transmission mechanism, frame and supporting device.

Q:How many square concrete can be produced in an hour of concrete mixer

One hour of theoretical productivity is 50, which is actually about 40. Because it takes time to get into the car and get out of the car, it's not a matter of machine production.