Plastic Film Coated Plywood for Bridege Construction
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m³
- Supply Capability:
- 6000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Plywood Introduction :
Plywood is with film faced , it is widely used in construction formwork system , it is the direct close with concrete .To make sure flat concrete surface, we ask the plywood better surface and long using lifetime .It can be with brown film and black film and plastic film.
Feature:
1.High bending strength
2.Strong nail holding
3.Moisture-proof and easy work
4.Tight construction and high strength
Specification:
Film | Chinese film 180-240g/m2 | |
Core | birch,poplar, hardwood ,combined or others | |
Grade | A/A or requested by customers | |
Glue | WBP,MR,Melamine(waterproof) | |
Size(mm) | 2440X1220, 2500X1250, 3000x1500 | |
Thickness(mm) | 6-27mm | 1/4inch(6-6.5mm) |
1/2inch(12-12.7mm) | ||
5/8inch(15-16mm) | ||
3/4inch(18-19mm) | ||
Moisture | ≤10% | |
Thickness tolerance | ≤ 6mm | +/-0.2mm to 0.3mm |
6-27mm | +/- 0.5mm | |
Packing | For transportation of Ocean and Land, Inside Pallet is wrapped with 0.2mm plastic bag, Steel strip or PVC for strength, More than 2mm plywood sheet or hard paper covering all the sides left, right,top and bottom. | |
Quantity | 20GP | 8 pallets/21M3 |
40GP | 16 pallets/42M3 | |
40HC | 18 pallets/53M3 | |
Usage | Usage Adequate for concrete forming for construction | |
Min Order | 1x20'ft container | |
Payment | T/T or L/C at sight | |
Delivery time | Within 20days after receiving deposit or Original L/C at sight |
- Q:What is the plywood made of wood?
- Plywood is cut from the wood section into a veneer or cut from the wooden square cut into thin wood, and then made of adhesive glue from the three or more layers of plate-like material
- Q:Plywood can improve timber utilization and is a major way to save wood.
- side panels are made of pure solid wood, do not use any other form of wood-based panels
- Q:Ordinary plywood is divided into four categories
- Wood fiber or other plant fiber as raw material to be pressed into a density of 0.50 ~ 0.88g / cm3 plate
- Q:Plywood in the processing of defects
- sand through sandlng through due to excessive sanding the table, local wear exposed layer or the next layer of veneer
- Q:What are the defects of the plywood?
- dead dead knots formed by the dead branches of trees, knots surrounded by the surrounding wood together, or even only part of the length of its cross-section of the length of about 1/4 or less than 1/4 , Texture hard or soft, and sometimes fall off the formation of empty.
- Q:Selection of plywood in plywood production
- In the production of plywood, derived from a lot of color varieties, one of the most important one is in the original plywood board surface affixed with a thin layer of decorative veneer, known as decorative veneer veneer plywood, the market referred to as decoration Board or trim panel.
- Q:Class I resistant weather plywood Class II water resistant plywood
- Medium density fiberboard: density fiberboard is a kind of man-made sheet, it is the plant fiber as raw material, the chipping, fiber separation
- Q:What is the best way to fix multi-layer plywood?
- Commonly used plywood type plywood, penta and so on. Plywood can improve timber utilization and is a major way to save wood. T
- Q:What is the amount of construction works used for this plywood?
- A class of plywood for weather resistance, resistance to boiling water plywood, which and he has a durable, high temperature, the advantages of steam treatment;
- Q:according to the use of plywood can be divided into needle plywood and broadleaf plywood.
- moisture content. Between 12 and 14% (according to Chinese national standards, Ⅰ, Ⅱ plywood absolute moisture content of not more than 13%;
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Plastic Film Coated Plywood for Bridege Construction
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m³
- Supply Capability:
- 6000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords