Lift Table Scissor Lift Table EU Type Manual Lift Table SP800/1000/1500
- Ref Price:
-
$200.00 - 1,000.00
/ unit
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Lift Table Scissor Lift Table EU Type Manual Lift Table SP800/1000/1500
● Valuable material handling equipment for use as a feeling table on assembly line.
● Structural heavy duty steel construction.
● Easy action foot operated hydraulic lift for raising table top to desired level.
● Hand operated table descent control.
● Over load-pass valve protects operator and pump.
| MODEL | SP800 | SP1000 | SP1500 | |
| Capacity | kg | 800 | 1000 | 1500 |
| Max. lift height | h12(mm) | 1000 | 1000 | 1000 |
| Min. height of table | h13(mm) | 420 | 380 | 420 |
| Lifting height | h3(mm) | 580 | 620 | 580 |
| Table size | l×b5×s(mm) | 1000×510×55 | 1016×515×60 | 1220×610×60 |
| Total height | h14(mm) | 996 | 962 | 962 |
| Overall length | l1(mm) | 1150 | 1170 | 1379 |
| Foot pedal cycles to max height | ≤70 | ≤55 | ≤70 | |
| Wheel diameter | d(mm) | 150 | 150 | 150 |
| Qty./20’ Container | PCS | 52 | 52 | 48 |
| Service weight | kg | 115 | 115 | 135 |
| Carton size | mm | 1190×630×460 | 1190×630×430 | 1410×730×450 |
Advantages
1 sincere
CNBM International is a state company, now is one of the largest state-owned group cooperation in China! All the outdoor heaters produced by CNBM are compliant with the national level quality.
2 professional
Our engineers will at your services 24hours to answer your questions. Our goal is to provide the best professional services.
3 quality
CNBM International’s outdoor heater have strict quality control, only the best quality products can pass the test.
4speed
We have professional sales team to guarantee your reply within 12hours to save your precious time.
5 After sales
If the tower crane has any problems, we will solve your problems in first time.
FAQ
China National Building Materials (Group) Corporation (CNBM), established in 1984,now is one of the largest state-owned group corporation in China, dealing with building materials & industrial equipment. Up to year 2010, CNBM Group's total asset is 20 billion USD and total staff is more than 100,000.CNBM International Corporation, specializes in designing & manufacturing of various
kinds of construction machinery, including tower crane, building hoist, etc. All the equipment produced by CNBM are compliant with the National level quality standard, and wins great reputation for their endurable performance in worldwide markets.
2.How about the shipment?
You can put 2 sets of of wheel loaders in one 40HQ container. The spare parts are packed with boxes.
The delivery time is 20 days.
3. What about your service?
We have our factory, we can meet customers needs as soon as possible.
We have first rate professional technology and provide good after-sales service.
4. After Sales Service
We offer the Preventative Maintenance and After Sales Service. For we strongly feels about the importance of supporting our customers and the product solutions we provide. Consequently we offer comprehensive maintenance options to prevent equipment issues before they become problems. Also we offer one year guarantee period.
- Q:Simple manual lifting mechanism, a nut a bolt can
- The lifting device does not have to be bearing, the screw is long, it is fixed in the round hole of the bottom panel, and the spiral of the screw is lowered by the spin of the screw
- Q:Do you have a personal elevator with hydraulic platform
- You need to consider the beauty of the platform; Perhaps you can consider using hydraulic villa elevator, safety performance is high, when power failure or failure has self-rescue function.
- Q:The structure of the universal elevator milling machine
- The main shaft is used to install the tool pole and rotate the milling cutter. The main shaft is a hollow shaft with a 7:24 precision taper hole in the front, which is used to install the taper shank of the milling cutter. The longitudinal platform is carried by longitudinal screw, which is carried on the guide track of the turntable, and the workpiece on the surface of the table is moved vertically. The T groove on the surface of the table is used to install the fixture or workpiece.
- Q:Can the stepping motor drive the hydraulic platform?
- Are you a driver for this motor? But the normal step motor is only for torque, step Angle, phase number, not for rotational speed; It may be a servo motor or torque motor, and if the speed is low it is the possibility of torque motors. In addition, you can measure the current, voltage or waveform below.
- Q:The automatic mahjong machine has a lift station always one. What is the other three normal
- Up when you use hand pressure, will watch it sink after coming up, if I don't stop for a second long came up again can eliminate motor, friction, but institutions, hall signal detection, duplication of effort.
- Q:What certificate is required to operate hydraulic platform
- Need special equipment to use the license, do this card is very expensive, seem to want 500 ~ 10000. Where did you buy it, because the house can do it for you? If the product does not meet technical review do not water,,,, I know there is a producers can do STH for sb, HuaNanJun industry machinery equipment co., LTD, special equipment to check more strictly, now,
- Q:What is the imported hydraulic platform car? Kneel and beg your help
- Their platform has a special mechanical structure that is widely used in high-altitude work, the shear fork structure, and the higher stability after lifting and lifting
- Q:Where is the mobile lift platform?
- Jinan history.the lifting machinery co., LTD. Is a set design, development, production and sales in the integration of manufacturing enterprise, specialized in manufacturing hydraulic lifting machinery and aerial work platform, the company is known as "water city" the laudatory name of shandong jinan hinterland, located in 220 national highway of provincial development zone economic development zone industrial park, north to south in mount tai, north across the Yellow River.
- Q:What is the reason for the automatic lowering of the hydraulic platform
- The hydraulic lift can rise steadily or maintain position because of the pressure oil in the cavity.
- Q:Safety operation of hydraulic platform
- 4, rise and fall: press the "rise" button, start the motor, the motor spin, the hydraulic system work, the oil cylinder protruding, the platform rises. Stay up to work the required height, "stop" button, the motor stop lifting platform, can work, if not in accordance with the "stop" button, the platform to calibrate height be 8 meters (native) trip switch, platform in height. At the end of the work, press the "drop" button, the solenoid valve action, when the oil cylinder is turned on, the platform is lowered by itself. During the use of hydraulic platform, it is strictly forbidden to overload (the unit load is 300kg), and the operator on the platform will not be moved during the descent. When moving or traction hydraulic platform, the supporting leg should be collected and the platform will be lowered to the lowest position. 7, when platform malfunction cannot work normally, should be promptly cut off the power supply for repair, it is strictly prohibited to equipment to work, in spite of non-professional workers do not remove the hydraulic components and electrical components. Do not use the machine in an unstable condition on the ground. Please do not raise the platform without the platform, the outside legs are not adjusted, the platform is flat and the ground is unstable.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Lift Table Scissor Lift Table EU Type Manual Lift Table SP800/1000/1500
- Ref Price:
-
$200.00 - 1,000.00
/ unit
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
