CDD16-360 / 1.6T Electric Pallet Stacker
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Electric Pallet Stacker Technical Specification
Stackers and reclaimers were originally manually controlled, with no means of remote control. Modern machines are typically semi-automatic or fully automated, with parameters remotely set. The control system used is typically a programmable logic controller, with a human-machine interface for display, connected to a central control system.
Other than stacking, a stacker has three basic movements:
Luffing: This is vertical movement. Stackers use either a winch mechanism with metal wire, or hydraulic cylinders, generally two. Winch mechanisms are highly reliable compared to hydraulic actuators and remain widely used, particularly in large stackers.
Travelling: The stacker moves on a rail track, which may be broad or narrow gauge, enabling it to move around the stockyard as required. For this purpose, traction motors powered by direct current (DC) are connected by bevel gears to between 12 and 22 wheels. For manual control, all the controls are in a controller's cabin above the boom conveyor or boom. Modern stackers can be controlled remotely.
Slewing: This is rotation of the stacker around its central axis to align or place the stockpile where required. This works mostly by a slew pinion that rotates around a slew base. This type of gear assembly is called a sun and planet gear. The axles may be multiple and are driven by DC-powered axle motors which transmit the torque via bevel or helical gears.
The conveyor belts used in stackers may be made of fabric or metal wire, depending upon the material to be handled. They are driven by pulleys, which in turn are driven by DC motors. The motors and gear are coupled by fluid coupling.
Most stackers are electrically powered by way of a trailing cable. There are basically two types of cable trailing: power cord rotating drum (PCRD) and control cable rotating drum (CCRD). Pendulum adjustments are made to ensure the proper alignment of these cables while the stacker is travelling.
- Q:How much is the construction elevator equipment
- The principle is different, the construction elevator operates in the litter box. The elevators are short for construction elevators, which are very high in the safety and performance of large facilities that can be used on the site. The construction elevator should be a dual-use lifting device. Type 1, imobile elevator construction lifter is a kind of lifting good stability, wide range of goods lifting equipment is mainly used for production assembly line height difference between the transport of goods; The material is up and down. Adjust the height of the workpiece when the workpiece is assembled; Top feeder: Lifting up parts when large equipment is assembled; Material on large machine tools; The warehousing and loading and unloading facilities shall be equipped with the loading and unloading of goods such as forklift truck. Depending on the requirements, the attached device can be configured to carry out any combination such as a secure protection device for a stationary elevator. Electrical control mode; Work platform form; Dynamic form, etc. The correct choice of various configurations can maximize the function of the elevator and achieve the best use effect.
- Q:The structure of the universal elevator milling machine
- The bed is used for fixing and supporting milling machine parts. There is a horizontal guide to the top of the beam. The front wall is a vertical guide with tails, which can be moved up and down the platform. Internal main motor, main shaft variable speed, main shaft, electrical equipment and lubricating oil pump, etc. The beam end of the beam is equipped with a hanger to support the pole to reduce the bending and vibration of the pole. The beam can be moved along the horizontal guide of the bed, and its stretching length is adjusted by the length of the pole.
- Q:There is no easy way to push the goods when the platform is loaded.
- There are several rollers or balls on the workbench that can move from above, not knowing what you are doing. If necessary, a friend can leave a message.
- Q:What should the chain's main elevator be aware of when installing the chain
- Based on many years of production installation experience, the following items should be noted in the installation: The rail type carries mesa thickness problem. According to the actual demand, adopt the most appropriate bearing mesa, some manufacturers in order to save costs by steel plate thickness is not appropriate, causing customers to use after a period of time, serious deformation mesa.
- Q:Put a large beaker of water on a horizontal platform and put a light glass upside down in the water
- The inside of the large beaker is raised, the pressure on the surface of the large beaker is larger, and C is right. The pressure of the bracket on the glass is downward, the pressure of the gas is rising, the glass gravity is constant, the pressure of the bracket is greater for the glass, and the D is wrong
- Q:How much is the 8 square meter tatami mat
- Look at the material you choose. Eight is not too small. It is estimated to be around 5,000-1w, without a lift
- Q:To make a four trapezoid screw lifting up seven tons of lifting platform should be matched with the straight screw and motor
- Can be judged according to the accuracy requirement of lead screw grinding or rolling, depending on the load and its acceleration can choose servo power right away and screw the maximum load capacity (do longer engineers can intuitive judgment the diameter of the screw and large), so that you can around the power of the servo motor of the different speed and different lead screw to match, so there will be several different schemes: high speed servo motor with small lead screw (sometimes deceleration machine), big inertia servo with lead screw. Under the condition of the machine cost to determine, from two to three scheme choice, choice of method is to choose low cost, with high stability, cost effectiveness and cost are the same common and suppliers have a spot. If the single from choose the ways of the servo and screw usually have an intuition, like 3000 revolutions of servo goods on the market the most sufficient, screw is according to the supplier's inventory.
- Q:Where do the elevator motors go?
- Abstract: the shear fork type electric elevator is a special equipment for high altitude operation. The it scissor mechanical structure, make the lifting platform lifting Has high stability, wide operating platform and high bearing capacity, make the work high above the range is bigger, and is suitable for many people work at the same time. It makes high-altitude work more efficient and safer. It is a special equipment for high-altitude operation. Characteristics: the lifting mechanism adopts high strength manganese steel. There is a safety protection device that prevents the elevator from overloading. Safety valve shall be set up to prevent rupture of hydraulic pipe. An emergency reduction device with a power failure. The product is suitable for high-altitude equipment installation, maintenance, etc. According to different requirements can choose different dynamic form (such as: three-phase ac power supply, single-phase ac power supply, dc power and diesel power, etc.), and with manual hydraulic equipment, can be in a power outage or lifting work as usual, no power supply and can add adjustable platform, can extend to the desired location on the length of the platform, so as to improve the work efficiency. It is the ideal of modern high building and equipment, which is necessary for the production of high-altitude safe civilization.
- Q:What about the heat treatment of the lifting platform?
- Ball screw work is often subjected to bending, torsion, fatigue and shock, while also bearing friction on sliding and rotating parts. The damage form of ball screw is mainly worn and tired. Therefore, its performance requirements as a whole must have good comprehensive mechanical properties (that is, a certain amount of strength and toughness) and high dimensional stability, working parts (raceway, diameter of axle) requires a high hardness, high strength and wear resistance. You are recommended to go to hymanu
- Q:Is the elevator moving faster or slower?
- Speed of computing: lifting speed is equal to the lifting height/(the volume of a cylinder/pump displacement) this article provided by jinan international hydraulic machinery co., LTD. Is for reference only
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
CDD16-360 / 1.6T Electric Pallet Stacker
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
