XPS Insulation Board for Shower Room CNBM Group 6mm/10mm/12mm
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Insulation & waterproofing solutions - CMAX board
Product name:
CMAX board (as known as construction board, tile backer board, insulation backer board, waterproof backer board, wet room backer board, XPS board.)
Product structure:
CMAX boards are made of high-performance waterproof extruded polystyrene (XPS Board), it has a 0.75mm coating on either side comprising a glassfiber mesh embedded in a polymer cement mortar.
Outstanding characteristics:
Both insulation and waterproof.
Product appearance:
The boards have straight edges. The color of the surface is grey and the core material is light blue.
Working temperature range:
50 to +80 °C
Standard dimensions and weight XPS Insulation Board for Shower Room:
Thickness(mm) | Weight(kg/m²) | Length by width(mm*mm) |
6 | 2,7 | 1200 x 600 |
10 | 2,9 | 1250 x 600 |
12 | 3,0 | 2500 x 600 |
20 | 3.1 | 2500 x 600 |
30 | 3,3 | 2500 x 600 |
50 | 4,2 | 2500 x 600 |
The board has the following tolerances:thickness:± 2mm width:± 2mm length:± 3mm.
Reaction to Fire XPS Insulation Board for Shower Room:
The boards are classified as class E according to EN 13501-1. When the boards are covered with tiles, their fire performance should comply with local construction laws and regulations.
Effect on indoor environment XPS Insulation Board for Shower Room:
CMAX board has been assessed as not emitting any particles, gases or radiation that may have a negative effect on the indoor climate or to have any significant effect on health.
Environmental declaration XPS Insulation Board for Shower Room:
The product does not contain any substances on the observation list of dangerous substances published by the national environmental authorities.
Main applications XPS Insulation Board for Shower Room:
Used as a watertight layer on walls and floors in houses, hotels and other wet areas such as bathroom, shower room.
Other applications XPS Insulation Board for Shower Room:
Other places to be insulated and waterproofed.
Applications XPS Insulation Board for Shower Room:
1. as a watertight layer on walls and floors in wet rooms and bathrooms.
2. as an insulation layer in under floor heating to avoid heat loss.
3. as partition walls in wood or steel frames.
4. substitute for gypsum board and fiber cement board; insulation and waterproofing; lighter so that more easily to install.
5. As enclosures for bathtubs, water pipes, etc.
6,Can very easily and fast formed to be small shelves, washbasins, shower benches and soap boxes.
7. Combining with CMAX curved/shapeable boards, kinds of decorative models can be made with your infinite creativity.
Fixing XPS Insulation Board for Shower Room:
Choose a way to fix CMAX board according to the substrate to be fixed. Normally, using modified tile adhesive for solid concrete wall/floor and strengthened by mechanical fixings when necessary while only using mechanical fixings for wood and steel frames.
Reinforcement:
1. Dry areas: reinforce all joints between boards, floors and walls by 125px or 250px wide self-adhesive tape.
2. Wet areas: reinforce by suitable waterproof tape.
Waterproof strengthen:
1. Strengthening all joints between boards, floors, walls and mechanical fixings placements by suitable waterproof tape.
2. Strengthening joints between walls, outside corners and inside corners by special corners.
3. Sealing pipe holes with special waterproof tape.
4. Strengthening once again by waterproof glue, liquid tanking membrane, tanking membrane paint, etc. when necessary.
Coating of panels:
Should always be covered by ceramic tiles, mosaics or other equivalent non-fireproof materials after installation.
FAQ:
1.
Q: Are you a manufacturer of insulation materials?
A: Yes. ourselves manufacturer of thermal insulation board.
2.
Q: What is the seaport near your plants?
A: The nearest port is Shanghai Port, there are about 100km from the port to our plant in Shanghai.
3.
Q: What is annual production capacity of your main products?
A: 200,000 piecs per month.
4.
Q: Do you have your own brands? And what are they.
A: Yes. we are a fortune 500 company, our brand is "CMAX"
5.
Q: Is sample available for testing?
A: Yes. The sample is free.
We do OEM as well. Welcome to make an enquiry and we will give you quick response in 12 hours!
- Q:How to distinguish between good and bad insulation board insulation board
- Class flexible management refers to the class teacher in the student's psychological and behavioral laws on the basis of the use of non-mandatory way, in the minds of students to produce a potential persuasive, the use of the class teacher's own positive factors to influence and guide students
- Q:Roof insulation layer is extruded polystyrene foam plate how set the amount of set
- Use the wall connection, set the location, the number of construction sites in accordance with the development of specific programs to determine. But also must meet the "construction of fastener type steel pipe scaffolding safety technical specifications JGJ130-20 lack of reminders of the United States and the United States and the United States and the United States and the United States and the United States, Note: . different erection mode, different height, the vertical spacing, horizontal spacing, each wall with a specific coverage area requirements. . pay attention to the standard is JGJ130-. do not use JGJ130-2002 old standard, the old and new standards on the wall with a little different provisions.
- Q:Steel structure rock wool sandwich wall panel what the amount of this set
- Extruded polystyrene board with XPS insulation board is no different, because it is the same thing two kinds of name. Extrusion polystyrene board full name is extruded polystyrene foam board, referred to as extruded plate, also known as XPS board, extruded polystyrene board. Extrusion polystyrene board use: 1 & gt; widely used in wall insulation, flat concrete roof and steel roof insulation; 2 & gt; for low temperature storage ground, parking platform, airport runway, highway and other areas of moisture insulation. Extruded plate is polystyrene resin supplemented by polymer in the heating and mixing at the same time, into the catalyst, and then extruded out of continuous closed-cell foam foam foam, the internal independent of the closed bubble structure, It is a kind of environment-friendly insulation material with high compression resistance, low moisture absorption, moisture-proof, airtight, light weight, corrosion resistance, super-aging resistance (almost no aging for long-term use) and low thermal conductivity. Extruded board is widely used in dry wall insulation, flat concrete roof and roof insulation of steel roof, low temperature storage floor, low temperature floor radiant heating heating pipe, parking platform, airport runway, highway and other areas of moisture insulation, Frost heave, is the construction industry inexpensive, excellent quality of the insulation, moisture-proof material.
- Q:Roofing the top of the extruded polystyrene insulation board generally how much weight ah?
- Caigang rock wool sandwich panel Scope Caigang rock wool sandwich panels for drying room, paint room, industrial equipment, construction, ship insulation, noise, etc., at the same time for electronic clean room, clean room, explosion-proof fire shop ceiling , Cut off and so on. Fire time is 70 minutes. Thickness 50-150mm rock wool insulation board is basalt and other natural ore as the main raw material, rock wool insulation board by high temperature melt fiber, adding the right amount of binder, curing processing and made. Rock wool insulation board products for industrial equipment, construction, insulation, noise and so on. Color rock wool sandwich panels Product Features 1. Rock wool is inorganic insulation materials, iron ore slag as the main raw material, by melting, with high-pressure steam jet cooling, with a light, thermal conductivity is small, good elasticity , Non-combustible, non-rotting, non-rotting, chemical stability, and excellent sound insulation.2 The rock wool sandwich panels are widely used in addition to the general structure of heat insulation and insulation To the use of a variety of fire insulation places. Caigang rock wool sandwich board specifications thickness Caigang rock wool sandwich board sub-system board and manual board two, Caigang sandwich panel is made of two layers of color coated steel Layer, through the automatic compound molding machine, in the steel plate coated with adhesive glue, while embedded in the board on both sides of the thin-walled steel, the pressure, blanking made of sheet metal. . the mechanism of rock wool color steel sandwich panel specifications: L × 1150 × . L × 1150 × . L × 1150 × . handmade rock wool color steel sandwich panel specifications: L × 985 × . Sandwich panel thickness is divided into: 50mm, 75mm, 100mm, 150mm. . rock wool density: ≥ 120kg / m. thermal conductivity: ≤ 0.046w / m.k. combustion performance: A-level (non-combustible)
- Q:I set up in October 2008, the production of XPS board - that is, with the extinction of polystyrene foam plastic plate, is an energy-saving environmental protection materials. Consult experts: I can enjoy the relevant tax incentives?
- the inner wall insulation, as the name suggests is the wall inside the house Hu Dangan citrus spinning song dead building, the use of spraying, bonding, pouring, etc
- Q:What is the difference between extruded polystyrene board and XPS insulation board?
- The interior design of the ceiling, to determine the location of the tuyere, and then design the HVAC professional with the design, after the design, you will find some outlet can not be arranged, or the ceiling must increase the outlet, and then install the factory twisted class defended straight gambling astringent leopard Adjusting the ceiling to adjust the drawings. In other words, this is the process of two professional cooperation with each other, but mainly based on the decoration ceiling map.
- Q:Extruded Polystyrene Board, Polystyrene Foam Board and Expanded Polystyrene Board
- It is a white solid with a fine closed-cell structure which is heated and preformed in a mold by heating before it is made of a volatile liquid blowing agent.
- Q:25 thick extruded polystyrene plastic insulation board how many kilograms per cubic meter
- Sandwich board is made of color coated board, stainless steel and other materials as the surface of the composite board, because of its unique dust, anti-static, anti-bacterial effect, is widely used in electronics, pharmaceuticals, food, biological, aerospace, precision Equipment manufacturing and scientific research on the indoor environment demanding clean engineering areas
- Q:Sound insulation and polystyrene insulation board which sound insulation better?
- Can be considered ultra-fine inorganic fiber spraying, this insulation material is sprayed up, not limited by the shape of the building, the speed is still fast
- Q:Why extruded board (XPS board) is the best insulation board material
- Scaffolding from the erection of the main points on the scaffolding, cantilevered scaffolding and climbing three. High-level general use of floor and cantilever set of set enough to set the dumplings rush to set off the boat to Long. If the number of layers to more than 30F, and the structure can be relatively simple climbing scaffolding, climbing the advantage of the higher the height of the higher relative to the cost of picking. I am a professional scaffolding company, do not understand can ask me. I hope I can help you.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
XPS Insulation Board for Shower Room CNBM Group 6mm/10mm/12mm
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
